25 CHARMILLES used machine for sale

CHARMILLES FI 440 CC wire EDM was manufactured in 2007 in Switzerland by Charmilles Technologies SA. The offered machine is an excellent choice for the production of precision dies, cutting dies and punches. It enables the efficient machining of workpieces made from even the hardest materials by means of electrical discharge machining. During machining, material is removed through controlled electrical discharges occurring between the wire and the workpiece submerged in a dielectric. This results in a high-quality surface finish without the need for additional finishing operations, such as polishing. The CHARMILLES FI 440 CC performs machining with a 5-axis cutting head. All axes of the machine are equipped with measuring systems in the form of linear scales and an anti-collision system. This solution guarantees the highest positioning accuracy and safe operation, even at high movemen ...

EDM Charmilles Roboform 350 - EDM Roboform350 BJ 2006 EDM MV2400 BJ 2021

3 x Used EDM Machines chamilles Robofill 240 cc Year of manufacture 2003 Chamilles Roboform 35 Year of Make: 2004 Tool Changer Starting Hole Chamilles SD 1 Year 2003

2 x EDM machines Charmilles Robofil 2020 BJ 1994 and Charmilles Robofil 4020 BJ 1996

EDM machine Charmilles Robofil 100

Inv. Num. : 8903 Type: Robofil 510 Producer: Charmilles Created: 1999 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 160 mm Max. travel length of the Z-axis: 150 mm Max. workpiece dimensions: 700 x 300 x 150 mm Max. workpiece weight: 200 kg Machine height: 2085 mm Machine length: 1660 mm Machine width: 1580 mm Machine weight: 2480 kg

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

Key data: 500 mm, 400 mm

Type: Die-sinking EDM machine Ident Number: 22607 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 35P Year of construction: 2002 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 400 mm max. workpiece size Z: 300 mm max. workpiece weight: 500 kg max. electrode weight: 50 kg Tool changer: 16-speed C-axis Generator: 64 amps lowerable container Erowa ITS50 Clamping Head

Key data: 500 mm, 400 mm

Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis

Key data: 750 mm, 500 mm, 64 A

Inv. Num. : 5897 Type: Roboform 54P Producer: Charmilles Created: 2000 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg New Source

wire EDM machine, year 1996. Used machine in good condition. More info & price on IndustrialBuyer.

This 3-axis CHARMILLES Roboform 2000 was manufactured in 1995. It features a maximum workpiece dimension of 880 × 550 × 225 mm and operates with a maximum machining current of 64 A. With only 1,497 operating hours, this machine has been used primarily for training purposes. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 2000 CNC Die-Sinking EDM machine we have for sale. Contact us for further details.

A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible.

This 4-axis CHARMILLES ROBOFIL 4030 Si was manufactured in 1999. It features a maximum workpiece dimension of 1200 x 700 x 400 mm and can handle a weight of up to 1500 kg. The machine is equipped with a wire diameter range of 0.05 – 0.30 mm and a maximum cutting speed of 500 mm²/min. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 4030 Si machine we have for sale. Contact us for further details.

Die Sinking Machine AGIE AGIETRON IMPACT 3 - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 500 mm, Cross travel y axis: 350 mm, Vertical travel z axis: 500 mm, C axis travel: 360 °, Working table size: 800x600 mm, Work tank dimension: 1100x730x400 mm, Automatic electrode change nr.: 28, Power supply: AGIEVISION 2, Max working current: 72 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem

This 3-axis CHARMILLES Roboform 350 die-sinking EDM machine was manufactured in 2006. It features travel paths of 350 x 250 x 300 mm and can accommodate a maximum electrode weight of 25 kg. The machine has a power consumption of 7.5 kVA and weighs 2350 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 350 machine we have for sale. Contact us for further details.

The Charmilles Robofil 2020 is a high-precision Wire Electrical Discharge Machine (Wire EDM). Manufactured in Switzerland, this machine is designed for detailed erosion work, making it a staple in toolmaking and the production of complex medical or industrial components. Here is a clean, structured text block for the Charmilles Robofil 2020 (1994) that you can copy and paste directly into an online listing or equipment database. --------------------------------------------------------------- Machine Specifications: Charmilles Robofil 2020 General Information - Manufacturer: Charmilles Technologies (Switzerland) - Model: Robofil 2020 - Year of Manufacture: 1994 - Machine Type: CNC Wire-Cut Electrical Discharge Machine (Wire EDM) Technical Travel & Capacity - X-Axis Travel: 320 mm (12.5) - Y-Axis Travel: 220 mm (8.6) - Z-Axis Travel: 116 mm (4.5) - U/V Axis Travel: ± 48 mm (for tap ...

This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.

This 3-axis CHARMILLES HD10 start hole drilling machine was manufactured in 2002. It features a work table size of 600x300mm, XY-travel of 350x250mm, and can handle a maximum workpiece weight of 450kg. Ideal for precise erosion tasks, the CHARMILLES HD10 machine we have for sale represents a robust addition to any machining setup. Contact us for further details regarding this machine.

Charmilles EDM SINKER Circuit board 852 8550

Submerged Wire erosion machine CHARMILLES ROBOFIL 440 CC, Information about technical data are not binding., Machine available subject to prior sale., X-Y-Z axes travel: 550x350x400 mm, U-v axes travel: 550x350 mm, Taper angle: ± 30°, Automatic wire threading and rethreading: yes, Maximum workpiece dimension: 1200x700x400 mm, Cnc: CHARMILLES, Total volume of dielectric: 1200, Filter type: Cartridge, Weight: 3.500 Kg, Accessories: Chiller unit

Charmilles Form 20 Tabledimensions / T slots : 398,8 × 299,7 mm Tank dimensions: 208,2 L Longitidinal displacement X-axes: 300 mm Transversal displacement Y -axes: 200 mm Vertical displacement Z-axes: 250 mm Max weight on table: 350 kg

Used machine in good condition. Available for immediate delivery. - Weight: 2.200 kg - Dimensions (long x wide x high): 1.800 x 1.600 x 2.130 mm - Travel (X x Y x Z): 400 x 250 x 200 mm - Type of EDM : WIRE - Max. workpiece weight: 500 kg

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 400 x 250 x 200 mm - Dimensions (long x wide x high): 1.800 x 1.600 x 2.230 mm - Weight: 2.200 kg - Operating hours: 21.483 - Max. workpiece weight: 1.000 kg - Max. workpiece weight: 500 kg - Control: CHARMILLES