CUCCHI db used machines

Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable functions: - oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional - Monitoring and fault diagnosis (touch screen) - Surface magazine - Bundles and other variants possible - automatic loading of short bars - Trays for tools - low power consumption (start/stop function) - Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6. ...

Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...

Manufacturer: Giovanni Cucchi Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more inf ...

for Schütte SF 32 - bar length 4 m -, Country of origin: Italy, Number of spindles: 6

8-color web width 342,6 mm 9 print clambs, 8 for water colour 1 UV glue clambs for packing-Monofolie up 30µ for printing of pressure-sensitive label material bis 200µ Ceramik-Aniloxcylinder, for 120/18 bis 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Inking roller for full-size inking with cutting for slitting etc. Still in operation: Yes Available: sofort

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic labeller for the application of one vignette label on the upper panel of carton. Mechanical speed 400 cartons per minute

8-colours web width 342.6 mm 9 printing stations, 8 for watercolours straight toothed 1 UV (glue) station redeveloped and further expanded for printing on packaging monofilm from 30" expanded and further expanded for printing on adhesive label material up to 200 Ceramic anilox cylinder, for 120/18 to 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Colouring roller for full-surface colouring Cutting device for longitudinal sections Etc. Still in operation: Yes Available: immediately

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

10,000 stacking boxes SSI Schaefer 14/6 – 1 DBGM Used goods, very good condition, see photos Load capacity 40 kg Volume 71 l Net weight 4.3 kg Outer length: 650 mm Outer width: 468 mm External height: 300 mm Color: Green Material: PP Dimensionally stable and robust Stackable on top of each other Temperature deflection from -20°C to +100°C Drop handles or recessed grips on both sides no Euronorm container 28 pieces per pallet Negotiation price: € 5.50 net from stock Retail price: € 4.90 net from stock upon acceptance 1 pallet Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as p ...

travel -x axis: 2x 750 mm travel -y axis: 500 mm travel -z axis: 600 mm control: Siemens 840 D turning speeds: 30 - 6.000 U/min tool taper: SK 40 numbers of positions in the tool changer: 22 surface area: 2x (1.000 x 500) mm Dimensions (L x W x H): 4.100 x 2.300 x 2.600 mm Double-place machining center (shuttle operation) | AXA - DBZ Additional equipment: The machine comes with a 4th axis on each side processing in tack setting. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. - Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to 4m, - lifting capacity – to 40 kg - Lifting speed - 7m / min - Speed - 7 m / min - Enviroment temperature - 5 to 45 degrees C - Total power requirement - 0,8 kW - Air Pressure - 0.5 - 0.6 MPa / stable /

Dowel hole drilling machine Fabr. Scheer Model: DB5 Drilling gear with 21 spindles Swivel Spindle distance 32mm Archive image! Original pictures will follow soon or on request

Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

ELS Side Labeler Bi 2014

Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.

This is a boiling kettle from the premium manufacturer Elro, type DBGN22-EDG-90-T, built in 2014. This pressure cooker is suitable for both cooking and frying. The usable capacity extends over 90 liters.The cooking apparatus is mounted on castors and equipped with handles. The purchase of this device includes an Elro connection beam for the wall, which is about 1300 mm long and can be easily decoupled and moved with the supply lines. It is an absolute premium product in commercial kitchen technology. The lid cooling is defective, the solenoid valve does not open, see note on the test protocol in the photo overview. A demonstration of the device is possible in our house, as the device is sold without any claim to any warranty. Ask for their special offer price. VAT is shown separately in our invoices. Our prices are gross incl. 19% VAT. Our used equipment service for you: High ...

Kaeser DB130 15 kW

Case bending machine Make Tränklein Model DBM 61 Year 1970´s Width 610 mm Condition refurbished after order Available Direct

Dimensions (L/W/H): 2150x480x1330 mm Weight: 230 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 750 mm, 500 mm, 600 mm

Inv. Num. : 7098 Type: DBZ Producer: AXA Created: 2008 Parameters: Control system: Heidenhain iTNC53O Duty cycle: 57676 h Hours: 23680 h Work table length: 1000 mm Work table width: 500 mm Maximum table load (even): 800 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Maximum tool diameter: 85 mm Max. tool weight: 8 kg Max. tool length: 400 mm Number of stacking positions: 22 pieces Machine height: 3550 mm Machine length: 4460 mm Machine width: 2250 mm Machine weight: 12000 kg Equipment: Chip conveyor 300m Suction Showa CRD-1500RA-CE-0043 Preparation for the 4th axis

BRAND: AXA YEAR: 2008 MODEL: DBZ PRODUCTION HOURS: 58513 APPLICATION TYPE: MILLING LOCATION: CZECH REPUBLIC MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: 01 02 2024 Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2250 MM MEASUREMENTS DEPTH: 4460 MM MEASUREMENTS HEIGHT: 3550 MM MACHINE WEIGHT: 12000 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: ITNC530 MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 6000 1/MIN NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 2 X 750 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 600 MM TABLE OUTER LENGTH: 1000 MM OUTER WIDTH: 500 MM TOOLS SLOTS IN STORAGE: 22 MAX WEIGHT: 8 KG MAX TOOL DIAMETER: 85/180 MM MAX TOOL LENGTH: 400 MM MEDIA POWER CONSUMPTION: 69 KVA Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - DISTANCE TABLE - SPINDLE NOSE 180 - 780 MM - RAPID FEEDRATE ...

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 220 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.