DAEWOO da used machines

FLOOR SCRUB CLEANING machine DAEWOO DAFL50A NEW, NEVER USED, YOM 2022 COMPLETED BY EL. BATTERY AND CHARGER NETTO WEIGHT 160 KG TWO AVAILABLE LOCATION - POLAND WE HAVE ADDITIONAL TWO SIMILAR CLEANING MACHINES KREMER KR-FL50A IN NEW CONDITION AND THE SAME PRICE.

connected load frequency: 230 V battery: 24V / 100Ah Brush diameter: 510 mm turning speeds: 175 U/min 0: Luft 24 L / s tank capacity: 50 / 50 Liter weight: 160 kg range L-W-H: 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L feed pressure: 14 bar liter capacity: 995 l connected load frequency: 400 V weight of the machine ca.: 200 kg dimensions of the machine ca.: 2,0 x 0,7 x ,125 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1250 mm working area:: 6400 m²/Std. tank capacity: Wasser 10l l 0: 80 l total power requirement: kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 1,2 x 1,3 m Sweeper - with charger - 2 x 400mm side brushes - includes 2 spare brushes - includes water tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, Vertical machining center - 2-pallet, Daewoo ACE VC500, CNC Model Fanuc, CNC version 18-M, Spindle Taper toolholders iso 40, Power spindle 15 Kw, RPM 10000, Number of tools 30, X-axis travel 760 mm, Y-axis travel 510 mm, Z-axis travel 570 mm, Changer pallet yes, Pallet dimensions 860x560 mm, Maximum load allowed 300 Kg, Swing type pallet yes, High coolant pressure yes, Cheap conveyor yes, Brand Daewoo, Model ACE VC500, Construction year 2000, DIMENSIONS AND WEIGHT, Length 3600 mm, Width 3700 mm, Height 2935 mm, Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped  ...

Brand Daewoo Model: DDAE10500DSE-3G Year of construction: 2022, New Capacitance (KvA) 8.1 kVa (230v) / 7.5 kVa (400v) Engine brand Daewoo Engine model 500 Motor capacity (Kw) 15 Hp Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Dimensions LxWxH (mm) 880 x 560 x 720 Weight (Kg) ca 165 Number of stucco in stock 100+ Comments Max power: 8.1 kVA (400 V) 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) 6.7 kVA (230 V) Engine Power: 15hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7M: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a turning diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control system, it offers spindle speeds up to 5000 rpm and includes a tool turret with 12 stations. Consider the opportunity to buy this DAEWOO PUMA TT 2000 SY horizontal turning machine. Contact us for more information about this machine.

This 5-axis DAEWOO PUMA 2000 SY turn-mill centre was manufactured in 2003. It features a max turning diameter of 330 mm, length of 510 mm, and rapid feeds up to 24,000 mm/min. Includes main and sub-spindle capabilities, both with C-axis, and a 12-station turret with live tooling. Consider the opportunity to buy this DAEWOO PUMA 2000 SY turn-mill centre. Contact us for more information about this machine.

This 3-axis DAEWOO ACE-V400 vertical machining center was manufactured in 2000. It features a working envelope of XYZ dimensions 560 x 400 x 570 mm and includes a hand wheel. If you are looking to get high-quality milling capabilities, consider the DAEWOO ACE-V400 machine we have for sale. Contact us for more information.

This DAEWOO Lynx 210B was manufactured in 2004. A robust horizontal turning machine featuring a spindle speed of up to 5000 rpm and motor power of 11 Kw. It supports a maximum turning diameter of 280 mm and a length of 305 mm. Equipped with a 12-position turret and useful accessories like a chip conveyor and tool presetting. If you are looking to get high quality turning capabilities consider the DAEWOO Lynx 210B machine we have for sale. Contact us for more information.

This 3-axis DAEWOO ACE V 600 was manufactured in 1997. It features an impressive X-axis travel of 1,260 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1,400 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO ACE V 600 vertical machining centre we have for sale. Contact us for further details.

DAEWOO MARINE ENGINE V180 TI + GEARBOX 1800 RPM 600 HP

DAEWOO/DOOSAN MARINE ENGINE V 158 TI V type, direct- injection, water cooled with wet turbo charger & inter-cooler

Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER

achine-Details Stock-No. 1105-03801 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DNM 5700 Year of manufacture 2021 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 570 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min Weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 12000 kW turning speed range 8000 1/min tool taper BT 40 table surface area 1200 x 500 mm groove width 18 mm Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12000rpm spindle) SIEMENS 828D CONTROL LIKE NEW ONL ...

Key data: 1050 mm, 540 mm, 510 mm

Machine Details Stock-No. 1105-04012 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DN 500 Year of manufacture 2008 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 540 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 18 kW turning speed range 12000 1/min tool taper SK 40 table surface area 1200 x 500 mm groove width 18 mm Number of noches 4 St. Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12,000rpm spindle) fanuc SERIES  ...

Key data: 700 mm, 1000 mm

Machine Details Stock-No. 1105-03950 Type of machine CNC Lathe Make DAEWOO DOOSAN Type PUMA 400 M Year of manufacture 2014 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KOREA Delivery time to be agreed Freight basis ex Site Technical details turning diameter 700 mm turning length 1043 mm control FANUC 21 IT turning diameter over bed 550 mm bar diameter 116 mm spindle nose A2 11 turning speeds 15~ 2000 rpm drive capacity - spindle motor 26/22 kW Torque 125 Turret (X-Stations) 12 Shank diameter 32 x 32 mm Drill shank diameter 50 mm Travel -X Axis 362 mm Travel -Z AXIS 2505 mm tail stock YES 120 MM slide. of quill 120 mm Quill Stroke 120 mm taper MK 6 rapid traverse X-axis 16 m/min rapid traverse Z-axis 20 m/min total power requirement 50 kW Additional information 700 X 1000 LENG FANUC 21 ITB CHUCK + CHIP CONVOYER

HORIZONTAL LATHE DAEWOO PUMA TT1800SY :::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 18iTB - Main Spindle Nose: ASA 6 - Main Spindle Power: 22.4Kw Main spindle bar passage: 65mm - Turning diameter: 230mm - Turning length: 980mm - Main spindle speed: 5000 Number of tool turrets: 2 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 165mm Y-axis travel first turret: +- 50mm Z-axis travel first turret: 700mm Second turret X-axis travel: 190mm Second turret Z-axis travel: 720mm Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 5000 Counter spindle power: 22Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Machine equipment: device for unloading long pieces Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIG ...

CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t, 10 tool turret tailstock, bar feeder The machine can be seen under power in our warehouse (M i m u)

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

Key data: 500 mm, 1180 mm, 3500 1/min

Machine Details Stock-No. 1105-04053 Type of machine CNC Lathe Make DOOSAN DAEWOO Type PUMA GT 2600 L Year of manufacture 2021 Type of control CNC Storage location HAGUENAU Country of origin KORREA Delivery time immediately Freight basis ex site , loaded free Price Technical details turning diameter 780 mm turning length 1280 mm control FANUC i SERIES turning diameter over bed slide 630 mm centre height 350 mm spindle motor 26/22 kW spindle turning speed range 3500 rpm Chucking diameter 254 mm Feed - Longitudinal/Cross 24 mm/min rapid traverse: longitudinal and cross 36 mm/min max. workpiece weight between centres 1500 kg total power requirement 45 kW weight of the machine approx. 7.3 t dimensions of the machine approx. 7 X 2.5 m Additional information - CNC fanuc i series ONLY 2 AXIS MACHINE - Tailstock - automatic tool measuring device with swivel arm  ...

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock number 1105-04058 Machine Type Machining Center - Vertical Make DOOSAN DAEWOO Type MYNX 540 Year of construction 2002 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Ex-works freight base Technical details longitudinal 1020 mm landscape 510 mm vertical 625 mm Tool Changer 30 Pos. max. tool length 250 mm max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm Rapid traverse 30 m/min Machine weight approx. 7 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (centre of the table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 SPEED ATC BT 40

Key data: 370 mm, 650 mm, 3500 1/min

Machine Details Stock-No. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex Site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570 mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm Turret (X-Stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM SCHIP CONVoYEUR TOOL SETTER COOLANT INTERLOKED GUARDS

Key data: 1000 mm, 3000 mm

achine details Stock-No. 1105-04069 Type of machine CNC Turning- and Milling Center Make DOOSAN DAEWOO Type PUMA 700 LM b Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details turning diameter 900 mm turning length 3050 mm control FANUC 21 i TB swing dia. 1030 mm Standard Turning Diameter 750 mm Bar Material Dia. 165 mm Spindle bore 110 mm Travel -X Axis 471 mm Travel -Z AXIS 2100 mm Rapid Travel - Longitudinal/Face 15/ 20 m/min Spindle RPM 3000 1/min spindle drive 45 kW turret stations / rotary tool stations 12 / 6 BMT 85 speed of driven tools 3000 1/min total power requirement 62.2 kVA Weight of the machine approx. 22.2 t dimensions of the machine approx. 6.1 x 2.2 x 2.2 m Accessories Chip conveyor YES Parts and total counter Tool holders  ...

DAEWOO LYNX 200B LATHE with FANUC control system