6 DECKEL MAHO universal processing centres used machines

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm Control: Heidenhain TNC 430 total power requirement: 26 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Control: Siemens Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 min-1 Tool holder SK 40 Manual swivel rotary table Tool holder Vice Accessories

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN iTNC 530 Table dimensions: 500 x 380 mm table weight: 500 Kg c-axis: 0.001º ( ± 360º) 0 b-axis: 180 ° rapid traverse X-axis: 80 m/min feeds: 50 m/min spindle turning speed range: 18.000 U/min spindle taper: BT- 40 spindle drive: 30 kW Internal cooling system: 40 bar handwheel: HEIDENHAIN HR-410 total power requirement: 50 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: SINUMERIK 840D pl spindle turning speed - stepless: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 5-axis machining center with SIEMENS SINUMERIK 840D pl control, electron. handwheel, NC swivel rotary table Ø1,000mm, coolant through the spindle, chip conveyor, 180-fold tool-magazine HSK100, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DECKEL MAHO DMU 60 monoBLOCK 5-axis machining center GENERAL Project No.: 905799 Quantity: 1 pcs. Manufacturer: DECKEL MAHO Type: DMU 60 monoBLOCK Control: Heidenhain Millplus iT Year of Make: 2008 Condition: Used machine Approx (hrs): 38596 Spindle in approx. (hrs): 200 Program run approx. (hrs.): 16181 DESCRIPTION MILL 5 axes Travel in X 730 mm Travel in Y 560 mm Travel in Z 560 mm Max. rapid traverse speed in X/Y/Z 30/30/30 m/min Tool holder HSK 63 Max. speed milling spindle 18000 1/min Milling head NC-controlled swivel -120/+30 degrees Chain tool magazine 60 stations Machine table 1000x600 mm Rotary table NC-controlled Diameter of rotary table 600 mm OTHER EQUIPMENT IR Workpiece Probes Splash protection cladding with partially clad work area Rotating viewing window Lighting in the work area Preparation for central oil/emulsion mist ...

Machining center Deckel Maho DMU200P - Very good condition - Available Immediately - Worldwide Export Year of Make: 2003 Condition very good Stock number 0732 Control Heidenhain iTNC530 Clamping area 1,700 mm x 1,400 mm Spindle speed 12,000 rpm Spindle holder SK50 Tool magazine 60 places Internal coolant supply (IKZ) and chip removal package 40 bar Conveyor. Probe Heidenhain TS642 electr. Handwheel Heidenhain Operating mode 4 High-speed attachment spindle 42,000 rpm Tool Measurement Blum Laser

Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Chip conveyor

Inv. Num. : 8008 Type: DMG DMU 50 eco Producer: Deckel Maho Gildemeister Created: 2010 Parameters: Control system: Siemens Sinumerick 810D Switch-on hours: 56933 h Operating hours: 25670 h Number of axles: 5 pieces Number of stacking positions: 16 Maximum spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 450 mm Travel Z axis: 400 mm Equipment: ShopMill

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm turning speeds: 12000 1 U/min : control: Heidenhain total power requirement: 59 kW weight of the machine ca.: 10,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain TNC 426 Travel X/Y/Z: 1250 x 880 x 800 mm Speed 8,000 rpm Tool magazine for 60 Wkzg. SK 50 Universal milling head +0° / - 90° Index NC rotary table 1250 x 1000 mm Chip conveyor Measuring Sensors

CNC Machining Center Vertical DECKEL-MAHO - DMC 63 V Built in 2002 in good condition. Control Heidenhain TNC 430 Heidenhain Hours: 10985 Specifications: Main spindle Speed range - main spindle 20 - 8,000 rpm Drive power - main spindle 13 / 9 kW Max. torque 83 / 57 Nm Tool holder SK 40 Workbench: Table clamping surface 800 x 500 mm max. table load 500 kg Installation height max. 240 mm Number of T-slots 5 T-slots - width 14 H12 mm T-slots - spacing 100 mm Distance between spindle nose and table 150 - 650 mm Feeds Feed rate X, Y, Z: 30,000 mm/min Rapid traverse ( X / Y / Z ) 30 m/min Tool changer: Tool changer 24 pos. max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 140 mm max. tool length 300 mm max. tool weight 7 kg Total power requirement 30 kVA Machine weight approx. 4 t Space requirement approx. 4.0 x 3.5 x 2.7 m Accessor ...

Year of construction: 2009 CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET  ...

Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator

Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement

CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN control: MillPlus iT table surface area: ø 500 x 380 mm B-axis: 0 - 161,955 ° C-axis: 360 ° spindle taper: SK 40 spindle turning speed range: 20 - 18.000 U/min spindle power: max. 35 kW max. torque on the spindle: max. 130 Nm feeds -stepless-: bis 20.000 mm/min rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min rapid traverse B-axis: 40 U/min C-axis rapid feed: 50 U/min no. of tools in magazin: 30 tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 40 bar total power requirement: 52 kVA weight of the machine ca.: 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device The data for this ad was created with ModulMWS - the  ...

Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor

x-travel: 760 mm y-travel: 460 mm z-travel: 560 mm Control: Siemens Sinumerik 840D b-axis: NC-Schwenkfräskopf A-axis: NC-Rundachse milling-head swivable +/-: -120 / +30 Tool changer: 60 Cooling through the spindle: IKZ 40 bar spindle turning speed range: 12.000 U/min spindle motor: 28/19 kW tool taper: HSK-A 63 max. torque on the spindle: 121 pm total power requirement: ca. 60 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: - m Universal bar machining center - Siemens Sinumerik 840 D 3D path control - Powerline ShopMill - Controlled NC swivel milling head (B-axis) - NC rotary axis with integrated clamping system - NC bar loader - Slide/conveyor belt for parts disposal - Coolant tank 600 ltr. with paper belt filter - IKZ 40 bar through spindle center - Rotating viewing window - Tool breakage control - Chip conveyor - Tool magazine - Chain magazine with 60 magazine s ...

x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm Control: SIN840D pl table-size: 950 x 650 mm workpiece weight max.: 1.000 kg feed X/Y/Z/-axis: 1 - 90.000 mm/min rapid traverse X/Y/Z: 90,00 m/min spindle turning speed - stepless: 1 - 18.000 U/min power capacity at 100 % load: 25,00 kW power capacity at 40 % load: 35,00 KW tool taper: HSK-A63 tool magazin:: 30 tool diameter: 80 mm tool diameter with 2 vacant positions: 140 mm tool length - max.: 300 mm weight of tools max.: 10,00 kg total power requirement: 58,00 kW weight of the machine ca.: 11,00 t dimensions of the machine ca.: 7,00 x 4,00 x H3,50 m Control SIEMENS Sinumerik 840D powerline with ShopMill, EROWA pallet system MTS500, tool breakage control, coolant-unit, coolant through the spindle (23 l/min at 40 bar), chip conveyor, electronic handwheel The data for this ad was created with ModulMWS - the software solution of LogoTe ...

The machine is in good technical condition, after prior agreement it is possible to test it. X=880, Y=630, Z=630 Rotary table 360??, tilting head +120?? /-30?? 32 slots, chip conveyor Rpm=12k

The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots

The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots

The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots