0 DECKEL tool milling machines used machines

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

Machine details Stock number 1105-03328 Machine type tool milling machine - Universal Make MAHO Type MH 800 E Year of construction 2000 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock price Technical details x-path 700 mm y-way 550 mm z-path 500 mm Speed 20 - 5000 rpm Tool holder SK 40 Quibola stroke vertical 80 mm Feed 1 - 5000 mm/min Rapid speed 6000 mm/min Table size 900 x 550 mm Total power requirement 16 KVA Weight of the machine ca. 7 t Space requirement approx. 2.4 x 2.85 x 2.1 m Information - with web control CNC 532 - with FIXED ANGLE TABLE WITH TOOL CHANGER - Enclosure Machine under power Ready for demonstration.

Code 0733 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 4 MA S/N 2204-1372 Year 1987 Control Grundig - Contour 2 Table 800 x 460 mm Longitude ( X – axis ) table 485 mm Vertical ( Y – axis ) table 380 mm Cross ( Z – axis ) spindle 385 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 63 - 3150 rpm Feeds X-Y-Z 2 - 3000 mm/min Rapides 3 m/min Spindle motor 3,7 / 4,4 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm turning speed range: 20 - 6.300 U/min feed speeds: 1 - 5.000 mm/min rapid traverse: 5 m/min tool taper: SK 40 power capacity: 6,3 / 10 kW control: Sinumeric 810 D tool change unit: pneumatisch manuell total power requirement: kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ca. 2 x 2 m 11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interface Operating mode 4 (extended manual intervention) Accessories: coolant device, electronic handwheel Machine is workshop tested and with electrical Acceptance report The data for this ad was create ...

x-travel: 800 mm y-travel: 400 mm z-travel: 300 mm digital readout: Heidenhain table surface area: 1000 x 520 mm turning speed range: 40 x 2000 U/min spindle taper: SK 40 total power requirement: 2,2 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1700 x 1600 x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm digital readout: Heidenhain 3 Achsen spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min table-size: 650 x 375 mm weight of the machine ca.: 1,5 t dimensions: ca. mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mill Plus Control Built in 1998 24-fold tool changer Working area 500 x 380 x 380 mm Rapid traverses 10000 m/min Rapid traverse 30 m Direct displacement measuring system Tool holder SK40, ISO DIN 69871 max. spindle speed max. 15000 rpm (Kessler) Angle table 800 x 480 mm, load 500 kg Spindle concentricity 300/0.01 mm Weight 3500 kg Machine dimensions: 2.45 x 1.76 x 2.38 m Coolant Injection El. Handwheel The machine is in very good technical condition. Runs quietly and precisely.

x-travel: 400 mm y-travel: 400 mm z-travel: 500 mm Control: Sinumerik 880 total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour - 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5267: Universal tool milling machines Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm total power requirement: 2 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,5 x 2 x 2 m No. 3934 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 Tool holder SK 40 Speed range 2000 rpm Rigid table Documentation On request / optionally available: -Universal table / fixed table - Hydraulic machine vice - Tool cabinet - Rotary table Ø 380 mm -Cutting attachment -Collets and arbors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Milling Machine Lid FP1 Travel XYZ: 300x150x340mm Spindle holder: ISO 40 S20x2 Spindle speeds: 40-2000 Size of the tables: 600x260mm -Feed on X and Z axes -Vert quill with 60mm stroke -Angle table . Chip tray . With some tools . Is cleaned and maintained . Nice machine in good condition

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2,,2 t dimensions of the machine ca.: 2,5*2*2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel FP3A 2820 - CNC Milling Machine - Deckel Contour 3 CNC control - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamp - Automatic speed manual transmission - Automatic clamping in X/Y/Z axes - Automatic central lubrication - Coolant device - Direct displacement measurement - Collision protection clutch in Z/Y axes - Built in 1987 Specifications Workspace: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke vertical: 80 mm Cpovd9Rv - Vertical milling head can be moved to the headrest: 150 mm Main Drive: - Motor: pole-switchable three-phase brake motor and manual transmission with clockwise/counterclockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Level Jump: 1.25 - Tool holder: SK40 (M16) - Tool  ...

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 2-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min