8 DMG universal processing centres used machines

Control: Siemens Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 min-1 Tool holder SK 40 Manual swivel rotary table Tool holder Vice Accessories

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN iTNC 530 Table dimensions: 500 x 380 mm table weight: 500 Kg c-axis: 0.001º ( ± 360º) 0 b-axis: 180 ° rapid traverse X-axis: 80 m/min feeds: 50 m/min spindle turning speed range: 18.000 U/min spindle taper: BT- 40 spindle drive: 30 kW Internal cooling system: 40 bar handwheel: HEIDENHAIN HR-410 total power requirement: 50 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain Mill-Plus Travel X/Y/Z: 500 x 380 x 380 mm Clamping area 500 x 400 mm Tool magazine for 24 Wkz., SK 40 Speed 8,000 rpm NC rotary and swivel table Chip conveyor

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: SIEMENS 840D table - swivable +/-: +110 / -5 ° -C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 t dimensions of the machine ca.: 2.9 x 2.0 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 560 mm, 520 mm

Inv. Num. : 9131 Type: DMU 60 T Producer: DMG Created: 2001 Parameters: Control system: Heidenhain MILL PLUS Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 520 mm Machine height: 2900 mm Machine length: 2900 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool Holder

x-travel: 1250 mm y-travel: 850 mm z-travel: 800 mm Control: Heidenhain MillPlus total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 200 mm y-travel: 200 mm z-travel: 280 mm Control: HEIDENHAIN iTNC 530 table - swivable +/-: -10 / +130 ° -C-axis table rotating: 360° milling head: 42000 rpm tool piece magazine with: 60 Werkzeugplätzen weight of the machine ca.: 5 t dimensions of the machine ca.: 2 x 2 x 2.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 735 mm, 650 mm, 630 mm

Inv. Num. : 9327 Type: DMC 65 V Producer: DMG Created: 2001 Parameters: Control system: HEIDENHAIN TNC 426/430 M Table diameter: 630 mm Maximum table load (uniform): 600 kg X-axis travel: 735 mm Y-axis travel: 650 mm Z-axis travel: 630 mm

Key data: 400 mm, 400 mm, 400 mm

Manufacturer: DMG Model: DMU 50 T Year: 2001 Condition: Used Stock number: 9356 Control system: HEIDENHAIN Work table length: 700 mm Work table width: 500 mm X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 400 mm Maximum vertical spindle speed: 9000 1/min Machine height: 3000 mm Machine length: 2400 mm Machine width: 2200 mm Machine weight: 3500 kg

Control Heidenhain TNC 426 Travel X/Y/Z: 1250 x 880 x 800 mm Speed 8,000 rpm Tool magazine for 60 Wkzg. SK 50 Universal milling head +0° / - 90° Index NC rotary table 1250 x 1000 mm Chip conveyor Measuring Sensors

Control Heidenhain TNC 426 Travel X/Y/Z: 1250 x 880 x 800 mm Speed 8,000 rpm Tool magazine for 60 Wkzg. SK 50 Universal milling head +0° / - 90° Index NC rotary table 1250 x 1000 mm Chip conveyor Measuring Sensors

x-travel: 2500 mm y-travel: 920 mm z-travel: 820 mm Control: Heidenhain iTNC 530 table surface area: 3100 x 900 mm table load: 3,0 t tool taper: HSK-A63 spindle turning speed range: 20 - 18000 U/min rapid traverse: (X,Y,Z) 100 / 60 / 60 m/min main drive: (S1/S6) 35 / 25 kW total power requirement: 92 kVA weight of the machine ca.: 25,6 t dimensions of the machine ca.: 10,3 x 6,2 x 3,3 m Operating hours: 113520 h Total spindle hours: 58190 h (date: 3rd September 2026) In April 2026, a new milling spindle from DMG-MORI was installed. Since then only 25 running hours ! * 4-axes controlled * CNC control HEIDENHAIN iTNC 530 * Autom. swivel-type milling head (B-axis) +/- 105 deg. * 120-station ATC * Chip conveyor * Tool measuring device (laser) * Electronic handwheel * Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools. The data for this ad w ...

Key data: 1800 mm, 2100 mm, 1250 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 210 P Year of construction: First commissioning June 2017 Condition: very good – machine set to half tolerance Control: Name: Heidenhain iTNC 530 HSCI Handwheel: Heidenhain HR 520 FS Technical data: • Spindle: 20-12000 rpm // 457 Nm – spindle with increased torque • CNC rotary table Ø 1700 mm • Table load: 8000 kg • B-axis (infinitely variable) • 120x WZW • HSK-A 100 interface • IKZ (internal coolant supply) 80 bar – frequency-controlled • 980 l coolant tank with paper belt filter • Zero-point clamping system incl. extensive accessories – pots, spigots, matching clamping plates, etc. • Chip conveyor • Rinsing gun • Infrarottprobe • Blumlaser • MPC – Machine Protection Control The machine is in very good con ...

Management Heidenhain MillPlus IT Travel X/Y/Z: 1250 x 710 x 710 mm Spindle speed: 12,000 min-1 Tool magazine for 60 Wkz., SK 40 NC rotary table integrated in rigid table d 800 mm / 1500 mm x 800 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swivel range -120/+30° Probe Infrared Fabr. Heidenhain TS 649 3D quickSET Expansion Pack Production package 40 bar/23 l/min (theor. Pump capacity)Tank 600 l, paper belt filter, rotating viewing panel Chip conveyor

Management Heidenhain MillPlus IT Travel distances X/Y/Z: 730 x 510 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 60 Wkz., SK 40 NC rotary table integrated in rigid table d 600 mm / 1000 mm x 600 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swivel range -120/+30° 3D quick SET Production package 40 bar/23 l/min (theor. Pump capacity)Tank 600 l Paper Belt Filter rotating viewing panel Chip conveyor

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm B - axis: -120 / + 30 ° NC- swivellable rotary table - Ø: 700 mm control: iTNC530 Heidenhain number of spindle speeds: 10.000 1/min spindle taper: SK 40 DIN 69871 max. torque at 40% / 100% load: 28 / 19 kW tool change unit: 2 x 16 Pos. table-size: 1250 x 700 mm table load capacity: 650 kp total power requirement: 44 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,50 x 3,20 x 2,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Siemens 840D Country of origin: Germany Spindle speed n-1: 12,000 Spindle motor kW: 9 Z - Path mm: 510 Y - Path mm: 510 X - Path mm: 835 Speed m/min: 30 Tool holder: HSK 40 Table load: 800 kg Clamping area mm: 1,000 x 560 Machine footprint mm: 2,100 x 2,700 Machine weight approx. kg: 4,200

Control: Siemens 840D Shopmill Country of origin: Germany Spindle speed n-1: 12,000 Spindle motor kW: 14 Z - Travel mm: 510 Y - Travel mm: 510 X - Travel mm: 835 Rapid traverse m/min: 30 Tool holder: SK 40 Table load: 800 kg Clamping surface mm: 1,000 x 560 Base area of the machine mm: 2,100 x 2,700 Machine weight approx. kg: 4,200 Linear scales Axis A Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy SPINDLE BEARINGS NEW!

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

x-travel 1,035 mm y-travel 560 mm z-travel 510 mm CNC control SINUMERIK 810D SIEMENS Table size 1200 x 560 mm max. table load 1000 kg Spindle holder SK 40 Spindle speeds 8,000 rpm Drive power - spindle motor 13 kW Infinitely variable feed 20,000 mm/min Rapid traverse 25 m/min Tool changing device 20 pos. Uiwzmu3B22 Coolant Setup Operating voltage 400 V Total power requirement 17 kVA Machine weight approx. 4.1 t Dimensions approx. 2.55 x 2.30 x 2.25 m Chip conveyor 3.80 x 0.90 x 1.55 m - Spindle ON: 5324 h - Control: SIEMENS Sinumerik 810 D - electr. Handwheel -Conveyor - Coolant device

x-travel: 350 mm y-travel: 240 mm Ucblcnl2H9 z-travel: 340 mm Speed: 20 - 4,500 1/min Table: D 400 x 280 Control: 810 D Shop mill SIEMENS Tool holder: SK 40 Rapid traverse: 5 m/min Spindle: 6.3 / 10 kW Total connected load: 15 kVA Approx. space requirement: 1.7 x 1.55 x 2.1 m Universal CNC Milling Machine, Rotary swivel table manual with angle display on the screen, El. Handwheel

Key data: 835 mm, 510 mm, 510 mm

Fully Functional CNC Milling Machine Machining Center Vertical DMG DMC 835 V Year of construction 2006 Control: SINUMERIK 840 D Powerline Spindle speed: 12,000 rpm Spindle motor: 14 kW X - Travel: 835 mm Y - Travel: 510 mm Z - Travel: 510 mm A-axis: available Rapid traverse: 30 m/min Tool holder: SK 40 Tool changing device: 30 Table load: 800 kg Clamping area: 1,000 x 560 mm Operating hours: 49,660 | 12,902 h (30.01.2025) Footprint of the machine: 2,100 x 2,700 mm Machine weight: approx. 4,200 kg Equipment SIEMENS 840D ShopMill Linear scales Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy Location of the machine: 76661 Philippsburg The machine can be viewed on site at any time. This is always desired. We would love to hear from you.

Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm spindle turning speed - stepless: 20-14000 U/min weight of the machine ca.: 4 t dimensions of the machine ca.: 5 x 3.5 x 2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens Sinumerik 840D Travel X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 Wkz., SK 40 Paper filter Conveyor