EISELE vms used machines

saw blade diameter: 275 - 315 mm cutting diameter: 80 - 102 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 1, 5 x 2 m No. 5230 Cold circular saw with additional gearbox for 4 speeds EISELE VMS II - S - PV ( Typ-Nr. 421 ) Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence) Weight approx. 400 kg Working range: Ø 80-102 /flat 160x75/82 Drive: 1,4/1,9 Feed - roller conveyor approx. 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mitre Cold Circular Saw EISELE Type VMS-III-S-PVTyp No. 430 Fabr. No. 2371 Year of construction 1991Saw range at 90 (round) 120 mmSaw range at 90 (flat) 150 x 110 mmSaw range at 45 (round) 100 mmSaw range at 45 (flat) 120 x 100 mmSaw blade diameter 350 mmSaw blade speed 17 + 34 rpm. Mitre cut 45 to the left, 90 and up to 30(60) to the right, infinitely variableMotor power 2 and 2.6 kWNerg connection 380 volts, 50 Hz- two cutting speed levels over 2 motor speeds-

saw blade diameter: 450/500 mm cutting diameter: mm stroke: mm total power requirement: 3,6 kW weight of the machine ca.: 1130 t dimensions of the machine ca.: m - Circular saw - semiautomatic - hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

saw blade diameter: 350 mm cutting diameter: 120 mm capacity 90 degrees: square: 110 x 110 mm capacity 90 degrees: flat: 140 x 110 mm capacity 45 degrees: flat: 140 x 90 mm total power requirement: 2,6 kW weight of the machine ca.: 0,5 t dimensions of machine L x W x H: 0,95 x 1,38 x 1,85 m Accessories: 1 used sawblade 350 mmø, coolant - with hydr. clamping of workpiece and hydr. feed of sawblade - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 40/80 U/min : 0025 voltage: 380 V clamping: ja kW miter: ja weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 440 mm weight of the machine ca.: 780 kg miter: feed: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 320 mm cutting diameter: 140 mm stroke: mm total power requirement: 3 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 150 x 110 mm capacity 45 degrees: flat: 120 x 100 mm engine output: 1,8 / 2,6 kW : 500 mm weight: 450 kg dimensions: ca. 1100x710x1850 m Semi-automatic vertical cold circular saw with pneumatic clamping and feed device 4 saw blade speeds (2 via motor / 2via gearbox: 11/22/44/88 rpm integrated coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6.0 - 8.0 bar total power requirement: 1.4 / 1.9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Con ...

Feature VMS II Cut at 90° (flat) approx. 140 × 70 mm Cut at 90° (round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (flat), round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m

Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.

Sawblade tiltable: - ° cutting width: - mm Motor output: - kW Cutting height: - mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm cutting diameter: 90 mm stroke: mm turning speeds: 40/80 U/min total power requirement: 1,5 kW weight of the machine ca.: 350 Kg dimensions of the machine ca.: 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24310 Technical data: - Manual saw blade feed - Workpiece covering in the machine vice - Saw blade diameter 315 mm - 2 cutting speeds 40 - 80 m/min - Cutting range at 90° around 110 mm - Rectangle 82 x 160 mm - Square 82 x 82 mm - mitred at 45° about 110 mm - Rectangle 80 x 120 mm - Square 82 x 82 mm - Drive 400 V / 1.4 / 1.9 kW - Coolant device - Space requirement approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg

saw blade diameter: 300 mm cutting diameter: 100 mm saw blade turning speeds: 40 / 80 U/min capacity 90 degrees: square: 90 mm capacity 90 degrees: round: 100 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 350 mm thereby cutting area Round: 120 mm Square: 100 x 100 mm Rectangle: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Approx. space requirement: 800 x 700 x 1770 mm

A vertical cold circular saw Behringer Eisele with material support on the left and right is available. Saw blade dimensions X/Y/Z: 350mm/3mm/40mm, speed: 68rpm, max. cutting capacity for flat material X/Y: 170mm/100mm, max. cutting capacity for square material X/Y: 100mm/100mm, max. cutting diameter: 120mm, machine dimensions X/Y/Z: approx. 1050mm/800mm/2200mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually i ...

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...