EMAG vtc used machines

This EMAG VTC 250 was manufactured in 2013. It features a chuck diameter of 250 mm and can handle workpieces up to 140 mm in diameter. The machine offers an X-axis travel of 300 mm and a Z-axis travel of 740 mm. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information.

This EMAG VTC 250 was manufactured in 2015. A vertical turning machine featuring a chuck diameter of 250 mm and maximum workpiece diameter of 140 mm. Axis travel includes 300 mm on the X-axis and 740 mm on the Z-axis. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information.

This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine.

EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:VDI 40Number of stations:11X-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 NmTool holder:V ...

swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers

Manufacturer: EMAG Model: VL 3 mLT Year of Manufacture: 2004 Type of Machine: Vertical Turning Lathe Data of VL3: - Lifetool available for powered tools - Interface for automation - additional inputs and outputs / M-functions - Shuttle operation - Machine was never driven wet (always dry) Electrical Specifications: - Working Voltage: 400/480 V - Control Voltage (General and Valves): 24 VDC - Frequency: 50/60 Hz - Current Supply: 3 AC - Rated Power: 31 kW - Rated Current: 48.40 A - Supply Fuse: 50 A Physical Specifications: - Total Weight: 5500 kg Find more here - / Contact us at -

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Manufacturer: EMAG Model: VL 3 HW mLLT Year of Manufacture: 2008 Data of VL3: - Lifetool available for powered tools - Interface for automation - additional inputs and outputs / M-functions - Shuttle operation - Machine was never driven wet (always dry) Electrical Specifications: Current Supply: 3 AC Frequency: 50/60 Hz Working Voltage: 400/480 V Control Voltage - General: 24 VDC Control Voltage - Valves: 24 VDC Connection Value: 38 kW Rated Current: 58 A Supply Fuse: 80 A Physical Specifications: Total Weight: 5500 kg Find more here - / Contact us at -

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

turning diameter:200 mm swing diameter:260 mm turning height:60 mm

BRAND: EMAG YEAR: 2002 MODEL: VL 3 APPLICATION TYPE: TURNING LOCATION: HUNGARY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2500 MM MEASUREMENTS DEPTH: 1900 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 5500 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 18I-T Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. TURNING DIAMETER 210 MM - MAX. CHUCK DIAMETER 170 MM - MAX. SPINDLE POWER ED 10-40/100% 25/16 KW - MAIN SPINDLE SIZE GR. 5 (DIN 55026) - AXES ON THE SPINDLE UNIT X/Z - FEED RATE X/Y/Z 5000/-/5000 N - MAX. RAPID TRAVERSE SPEED X/Y/Z 60/-/30 M/MIN - MAIN SPINDLE TRAVELS X/Y/Z 400/-/200 MM - LOWER REVOLVER 12 TOOLS - TOOL HOLDERS VDI 40 QUALITATIVE MACHINE BENEFITS: - DRIVEN TOOL REVOLUTION 6000 1/MIN

BRAND: EMAG YEAR: 2006 MODEL: VL 3 APPLICATION TYPE: TURNING LOCATION: HUNGARY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2500 MM MEASUREMENTS DEPTH: 1900 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 5500 KG CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK MAIN DRIVE SPINDLE SPEED RANGE: 7500 1/MIN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX. TURNING DIAMETER 210 MM - MAX. CHUCK DIAMETER 210 MM - MAX. SPINDLE POWER ED 10-40/100% 25/16 KW - MAIN SPINDLE SIZE GR. 5 (DIN 55026) - AXES ON THE SPINDLE UNIT X/Z - FEED RATE X/Y/Z 5000/-/5000 N - MAIN SPINDLE TRAVELS X/Y/Z 400/-/200 MM - MAX. RAPID TRAVERSE SPEED X/Y/Z 60/-/30 M/MIN - LOWER REVOLVER 12 TOOLS - TOOL HOLDERS VDI 40, DRIVEN TOOL REVOLUTION 6000 1/MIN

BRAND: EMAG YEAR: 2001 MODEL: VL3 APPLICATION TYPE: TURNING LOCATION: CROATIA MACHINE TYPE: VERTICAL LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES 18I-T

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7575 Type: VL7 Produzent: Emag Erzeugt: 2010, GO 2012 Parametern: Steuerungssystem: Fanuc 32i TB Max. Drehdurchmesser: 420 mm Maximale Drehzahl der Spindel: 3400 1/min Verfahrwege X: 850 mm Verfahrwege Z: 315 mm Spannfuttergröße: 400 Länge: 5250 mm Breite: 3500 mm Höhe: 3500 mm Gewicht: 9000 kg Ausstattung: Kühlung Späneförderer Angetriebene Werkzeuge Messsonde

power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 * 0,7 * 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,5*1,6*1,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical lathe Type: VL 5i F Manufacturer: Emag Year: 2016 number of axes : 2 max clearance diameter : 250 mm max part diameter : 220 mm machining height : 175 mm strokes (X/Z) : 660 / 300 mm quick feed (X/Z) : 60 / 30 m/min turret number of positions : 12 tool-holder : VDI40 spindle power : 28 /18 kW speed : 0 to 4.500 rpm index precision C axis : 0,001° part magazine capacity diameter 30 to 85 mm : 37 pos.,max 4.5 kg part magazine capacity diameter 30 to 160 mm : 22 pos.,max 8 kg part magazine capacity diameter 80 to 220 mm : 16 pos.,max 10 kg part height max : 175 mm voltage : 400 V installed power : 36 kW dimensions floor space: 2266 x 4184 mm height : 3200 mm weight : 7.500 kg Chip conveyor Machine in good condition, under power Find more here - / Contact us at -

Control Other WEISS CNC Tip width [mm] 650 General: Control WEISS CNC Center width 650 mm Center height 200 mm Grinding wheel dimensions 400x60 mm + 500x60 mm Workpiece headstock: Speed 10 -650 rpm Workpiece weight max. 250 (100) kg Grinding diameter max. 390 mm

Control Fanuc 18i-TB Rotary diameter. [mm] 130 Turning length [mm] 110 General: Year of construction 2008 Control Fanuc 18i-TB Turning diameter 130 mm Turning length 110 mm Circumferential diameter 200 mm Workpiece height max. 110 mm Spindle: Motor spindle technology Speed 7,500 rpm Power 24 kW Torque 158 Nm C-axis 0.001° Clamping Cylinders Full-Clamping Cylinders Tool carrier (X/Z): Technology Star Turret Number of stations 12 pieces Tool holder VDI 40 Tool drive 6,000 rpm, 40 Nm X-axis 400 mm Z-axis 200 mm Equipment / Accessories: Direct displacement measuring systems (glass scales) Chip disposal chip conveyor Coolant supply high-pressure pump Automation of circulating workpiece storage Exhaust mist extraction Mechanically prepared

An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.