Band Saw Automatics used for sale (110)

2 Column Heavy Duty Band Saw Machine BERG & SCHMID SBS 300 VA-1/CNC Year of Make: 2019 Cutting diameter round: 300 mm Square cutting diameter: 300 mm Cutting diameter flat: 300 mm x 260 mm Belt speed: 20 – 100 m/min Modern SNC 20 control system Frequency-controlled saw drive Control buttons with pictograms Powered chip brush Belt Tension Hydraulic Clamping Pressure Regulation Work light Chip conveyor Taxiway 2 m

Automatic sawing machine MEP 320 AXI, Information about technical data are not binding., Machine available subject to prior sale., Round cutting capacity: 260 mm, Rectangular cutting capacity: 320x000 mm, Blade dimension: 3150x27x0.9 mm, Band speed range: 20 - 100 m/1 (Stepless), Weight: 1.000 Kg

Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm

cutting diameter: 800 mmsaw band length: 9195 mmcutting width: 1,6 mmtotal power requirement: 23 kWweight of the machine ca.: tdimensions of the machine ca.: mcutting range enlargement up to 800 round steelroll conveyorcoolant devicechip conveyorTechnische Daten:Schnittbereich rund / cutting range round 800 mmSchnittbereich vierkant /cutting range square 830x730 mmSchnittgeschwindigkeit stufenlos / cutting speed stepless 12-120 m/min.Sägebandlänge / dimensions of the saw band 9195x67x1,6 mmGesamtantriebsleistung / drive capacity 23 kWGewicht der Maschine ca. / weight 11600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 230 mm

suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece

cutting diameter: 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 20 - 140 m/minsaw band length: 3720 x 34 x 1.1 mmheight of material-table: 825 mmcoolant capacity: 80.0 ltotal power requirement: 2.5 / 3.5 kWweight of the machine ca.: 1500 kgrange L-W-H: 2350 x 2050 x 1500 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8Equipment:- electro-hydraulic band saw - FULLY AUTOMATIC- for sawing hollow profiles and solid materials made of steel, stainless steel,. tool steel, non-ferrous metals and plastic- control panel on the front right including button for manual operation (setup/individual cut)- electro-hydraulic material clamping- stepless cutting speed .. 20-140 m/min.- electro-motor chip conveyor- manual adjustment of the material feed range via handwheel including analogue value display- automatic height adjustment of the saw fra ...

Key data: 530 mm

Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual

cutting diameter: 255 mmdimensions of saw-band: 2750 x 27 x 0,9 mmcutting width: 200 x 320 mmcutting speed: 20 bis 80 m/min: 125 mm: 125 x 125 mm: 195 mmImpact energy: 350 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,1 x 0,8 x 1,75 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26087 Technical data: - CNC control PS 210 for material replenishment machine, - Cutting speed, cutting pressure - Separate manual operation of all functions without CNC control - Saw blade dimensions 4150 x 27 x 0.9 mm - Cutting speed infinitely adjustable 15 - 105 m/min - Cutting pressure regulation infinitely variable 0.2 - 2.0 m/min - Cutting area - at 90° around 320 mm - Square flat 400 x 280 mm - at 45° around 200 mm - at 30° Re about 170 mm - Left + right mitre adjustable with digital display - min/max section length of the material replenishment machine - for single stroke 2 / 1005 mm - Total drive 400 V / 3.0 kW - Minimum quantity coolant spraying device pneumatically supported - Hydr. Saw Band Tension + Mot. Saw Blade Brush - 2 pieces of original roller conveyor 2000 mm - Space requirement approx. W  ...

cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 3920 mm, 34 mm

Extensive standard equipment: Double Column Structure Double Vice with Full Stroke Tension (Hydraulic) Floating Pendulum Vise Hydraulic Saw Band Tension Automatic feed in pendulum mode (500mm) Carbide saw blade guide system Stepless speed control by inverter Driven wire brush Work Light Automatic Chip Conveyor User-friendly NC control with touchscreen Display of belt speed on the touchscreen Flushing hose for machine cleaning

CNC Saw Brand: SOITAAB (FRIGGI) Model: SF300 CN Type: Automatic Structure: Double column cylinders Round cutting capacity: up to 300mm Saw blade speed variation Ethernet interface (Industry 4.0)

Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg

cutting diameter: - mmsaw band length: - mmcutting width: - mmtable - swivable: ja Gradweight of the machine ca.: 200 kgdimensions of the machine ca.: - mwith welding equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 2000 mm - from location D - 14943 Luckenwalde

dimensions of saw-band: 2950x27x0,9 mm: 15-100 m/min: 285 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: flat: 280x220 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 140x100 mmcapacity 45 degrees: round: 230/200 mmcapacity 45 degrees: square: 200/170 mmcapacity 45 degrees: flat: 220x200/200x140 mmtotal power requirement: 2,2 kWWeight: 990 kgOverall size: 2500x2230x2050 mmAccessories / equipment:- Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Cutting range at 90° around 260 mm - flat 260 x 260 mm - Material replenishment machine max. single stroke 600 mm - Max. section length in multi-stroke mm - Saw blade dimensions approx. 4100 x 32 x 1.2 mm - Cutting speed infinitely variable 12 - 100 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Chip conveyors - Total drive power 400 V / 8.5 kW - Space requirement approx. W 2350 x H max. 2340 x D 3050 mm - Weight approx. 3000 kg - from location D - 14943 Luckenwalde

cutting diameter: 300 mmsaw band length: 3660 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: round: 290 mmcapacity 45 degrees: flat: 260 x 280 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: flat: 180 x 170 mmcoolant capacity: ca. 100 lControl: SPS total power requirement: 2.4 kW ACweight: 904 kgrange L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on requestFeatures:- Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws- Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable- For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in semi-automatic mode Ma ...

Amada model HFA 1000, built in 1999 Cutting capacity: approx. 1000 mm Square: 1100 x 1000 mm Belt drive: 11 kW Hydraulics 2.2 kW Coolant 0.25 kW Cleaning brush 0.20 kW Chip conveyor 0.20 kW Saw blade dimensions: Length 9,700 mm Width 80 mm Depth 1.6 mm Belt speed 15-80 m/min infinitely adjustable Table load 15,000 kg Accessories: electrically driven roller conveyor

cutting diameter: 250 mmsaw band length: 2950 mmcutting width: 280 mmdimensions of saw-band: 2950 x 27 x 0,9 mmcapacity 90 degrees: flat: 280 x 200 mmcapacity 90 degrees: square: 230 mmcapacity 45 degrees: round: 190 mmcapacity 45 degrees: flat: 180 x 180 mmcapacity 45 degrees: square: 180 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: flat: 110 x 110 mmcapacity 60 degrees: square: 110 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,4 tPowerful miter band saw for cuts from 0 ° to 60 ° left-CCS (CutControlSystem) for automatic cutting. (Stepless regulation of theFeed and switch-off at the end of the cut)Description:-Manual cutting cycle-AUTOMATIC CUT: (via selector switch) with stepless settings of theLowering speed and adjustment of the cutting pressure via compensating spring-Stable, torsion-resistant and low-vibration saw frame made of cast steel-Vice wi ...

Key data: 430 mm

Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw  ...

CONTROLS  PLC TECHNICAL SPECIFICATION  max. cutting height: 360 mm  sawband length: 5334 mm  sawband width: 41 mm  max. bar feed (single stroke): 600 mm  cutting speed min.: 14 m/min  cutting speed max.: 102 m/min  power of band drive: 5.5 kWELECTRICAL SPECIFICATIONS  total power consumption: 10 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 2840 mm  space requirements -front/back-: 2800 mm  total height: 2130 mm  total weight approx.: 2540 kg

Key data: 380 mm

MEBA automatic band saw meets all the requirements you have for a high-quality and high-performance band saw. Manufactured by a renowned German manufacturer, this used machine type 380 ANC is ideal for industrial applications. Perfect for series parts, this band saw offers not only precision and reliability, but also the ability to efficiently and quickly process large volumes of material. Any company that regularly processes large quantities of material will appreciate the strength and efficiency of this machine. Details: Type: 380 ANC Manufacturer: MEBA Condition: Used Efficient machining of series parts

: 300 mm: 300 mm: 300 x 260 mmsaw band length: 3920 x 34 x 1,1 mmtable height: 780 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 1,65 tdimensions: 2,0 x 2,05 x 1,7 mUnused display machine2-column high-performance automatic band saw from the SBS series• Modern SNC 20 control system for CNC models• Frequency-controlled saw drive• Work light• Powered chip brush• Hydraulic band tensioning• Clamping pressure adjustment• Double vise (before and after the band)• Creep speed for positioning• Bundle tensioning, electrically and hydraulically prepared• Chip conveyorThe SNC 20 control system allows for convenient and uncomplicated input ofup to 20 different sawing tasks (length and quantity). When thetarget dimension is entered, the control system automatically calculates the saw waste and the number offeeds. In addition, the error code di ...

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

cutting diameter: 430 mmsaw band length: 6830 mmcutting range: 430 x 430 mmcontrol: Siemens Simatic HMI cutting speed: 80 m/minheight of material-table: 700 mmdimensions of the machine ca.: 5,36 x 6,83 x 2,41 mtotal power requirement: 25 kWweight of the machine ca.: 4920 kgEquipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25359 Specifications: Cutting range at 90° around 250 mm - flat 275 x 180 mm - Mitre adjustable left Schnittb. at 45° around 200 mm - Schnittb. flat at 45° 190 x 180 mm - Schnittb. flat at 30° 130 x 110 mm - Material support height approx. 920 mm Saw blade dimensions 3100 x 27 x 0.9 mm Cutting speed infinitely variable 15 to 100 m/min hydr. Lifting – lowering the saw frame Upper stroke limit of the saw frame Cutting pressure infinitely adjustable 0 - 10 m/min hydr. Material vise Micro Spray Coolant Device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 2400 x H 1600 x D 1800 mm - Weight approx. 1300 kg - 3 x roller conveyor 1500 mm

cutting diameter: 320 mmsaw band length: 6300 mmcutting range: 420 x 320 mmcontrol: Siemens Simatic HMI cutting speed: 20 - 130 m/minheight of material-table: 950 mmtotal power requirement: 15 kWweight of the machine ca.: 2920 kgdimensions of the machine ca.: 6,35 x 6,76 x 2,41 mMachine overhauled by Kasto in 2016Equipment/accessories:- Cutting feed continuously adjustable- Pneumatic connection 6 bar- Coolant 75 l- Pump capacity 40 l- Roller conveyor- Chip conveyor - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 360 mm

SPECIFICATIONS Max. cutting height: 360 mm Saw blade length: 5334 mm Saw band width: 41 mm Max. bar feed (single stroke): 600 mm Cutting speed of: 14 m/min Cutting speed up to: 102 m/min Saw blade drive power: 5.5 kW Power consumption 10 kW Space requirement -left/right-: 2840 mm Space requirement -front/rear-: 2800 mm Total height: 2130 mm Total weight approx.: 2540 kg from warehouse 95643 Tirschenreuth, loading free Shipping possible, transport costs are borne by the buyer The price includes 19% VAT! This will be shown separately in the invoice. This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. No returns for used goods! No warranty. A viewing of the goods is possible by arrangement. If you have any questions, please send us a message, we will answer as soon as possible. Thank you very much! Changes / errors in the techni ...

cutting diameter: 230 mmcapacity 90 degrees: flat: 230 x 230 mmcapacity 90 degrees: square: 230 x 230 mmvice: 235 mmturning speed range:: 15 - 100 m/mindimensions of saw-band: 2950 x 27 x 0.9 mmControl: MEP CNC total power requirement: 3.18 kWweight of the machine ca.: 1175 kgdimensions of the machine ca.: 1980 x 1105 mm Automatic two-column band saw with a footprint of only 2.5 square meters Highest performance in the smallest space Features :- powerful CNC automatic band saw in two-column design for cuts at 0°- with Windows-CE based touch screen control 5.0 - 180° tiltable control panel Up to 100 cutting programs, each with different quantities and lengths Minimizes programming time for frequently executed jobs- 2x operating modes (semi-automatic and automatic) enable efficient cutting under all conditions- Saw head feed via linear guides driven by hydraulic cylinders. with preloade ...

Material feed in any length (max. stroke 400 mm) Cutting diameter: around 360 mm, square steel 90°: 360 x 360 mm Cutting speed infinitely adjustable: 17 - 110 m / min. Conveyor Instruction manuals and additional saw blades available Further technical data on request Machine weight: approx. 2,400 kg

cutting diameter: 270 mmsaw band length: 2925 x 27 x 0.9 mmcapacity 90 degrees: flat: 350 x 240 mmcapacity 45 degrees: round: 230 mmcapacity 45 degrees: flat: 230 x 150 mmcapacity 60 degrees: round: 140 mmcapacity 60 degrees: flat: 140 x 140 mmtable height: 740 mmcutting speed: 36 + 72 m/minclamping range: max. 355 mmtotal power requirement: 2.0 kWweight: 1180 kgrange L-W-H: 2150 x 2400 x 1900 mmEquipment:- Metal band saw - Fully automatic with one-sided miter adjustment- Multifunction digital control panel- Programmable work cycle- Help and self-diagnosis in the event of malfunctions- Coolant system- Saw blade guide with hard metal plates- Hydraulic saw frame lowering- Automatic raising and lowering- Band tension with pressure gauge- Hydraulic vice clamping- Operating instructions (ENG)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions

cutting diameter: 350 mmsaw band length: 4160 x 34 x 1,1 mmcutting width: 350 mmcutting capacity - flat: 400 x350 / 90° mmcutting capacity - flat: 400 x 350 / 30° mmcutting capacity - flat: 290 x 300 / 45° mmcutting capacity - round: 350 / 90° mmcutting capacity - round: 320 / 30° mmcutting capacity - round: 320 / 45° mmfeeds - fine adjustment: 20-100 mmhydraulic motor: 0,37 kWcoolant pump AC: 0,12 kWdrive motor: 2,2 kWtotal power requirement: 2,7 kWweight of the machine ca.: 1,05 tdimensions of the machine ca.: 2100 x 1300 x 850 mAccessories :automatic sawing functions, hydraulic clamping, material feed viadriven rollers, pneum. adjustable lowering speed,sawing programs adjustable via touch screen,EU quality and CE standards,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 670 mm

Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg

cutting diameter: 280 mmsaw band length: 4930 mmcapacity 90 degrees: square: 280 x 280 mmcapacity 45 degrees: round: 280 mmcapacity 45 degrees: square: 280 x 280 mmcapacity 60 degrees: round: 220 mmcapacity 60 degrees: square: 200 x 200 mmfeed length: 600 mmfeed length: multiple: 5400 mmcutting speed: 17 - 90 m/minlength of rest piece min/max: min. 30 mmsaw diameter: min. 10 mmcontrol: KASTO, Compact Control total power requirement: 5 kWweight of the machine ca.: 1,75 tdimensions of machine L x W x H: 2,68 x 2,54 x 1,59 mAccessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm widthThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 280 mm

Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...

cutting diameter: 520 mmsaw band length: 7239 mmcutting width: 1,3 mmControl: POSIMOD cutting range - square -: 520 x 520 mmfeed length: 500 mmfeed length: multiple: 4500 mmmin. cut-off length: 6 mmlength of rest piece min/max: 10 / 100 mmcutting speed: 20 - 130 m/mindimensions of saw-band: 7239 x 50 x 1,3 mmsawing motor: 5,5 kWtotal power requirement: 10,0 kWweight of the machine ca.: 3,8 tdimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m- 2 column guided -Accessories: roller track 2500 mm length, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg

cutting diameter: 15 - 560 mm: 560 x 630 mmdimensions of saw-band: 7.400 x 54 x 1,60 mmControl: KASTO material feed - single: 900 mmmultiple feeding length: max. 9.999 mmcutting length min.: 6,00 mmsawing motor: 5,50 kWcutting speed: 13 - 127 m/minheight of material-table: 700 mmtotal power requirement: 12,00 kWweight of the machine ca.: 6,00 tdimensions of the machine ca.: 3,70 x 2,50 x H2,50 mAutomatic two-column band saw with KASTO Compact Control,frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1mand outfeed roller 2m, Machine can be inspected under power.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm

What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.

roll diameter: 500 mmthroat: 1050 / 485 mmworkpiece height: 300 mmsaw band length: 3920 - 4050 mmcutting speed: 15 - 940 m/mintable height: 1040 mmtable surface area: 750 x 800 mmTable tiltable: 15 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 1000 x 2100 mm- Fully automatic miter band saw- MAC 90 control- Saw feed infinitely adjustable via precision throttle- Infinitely adjustable clamping pressure- Infinitely variable speed adjustment of the saw band- hydraulic bundle clamping- chip conveyor- Cooling device- Micro dosing device- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Behringer HBM 540 A Automatic Band Saw Year of manufacture 2005 Flat working area 630x540 Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min Feed roller conveyor driven 8750mm Width 1100mm Discharge roller conveyor not driven 5020mm width 910 Conveyor The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 820x610 saw band length: 5850 x 41 x 1,3 mmband speed: 15 - 100 m/mintable height: 800 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,45 tdimensions of the machine ca.: 5,85 x 3,6 x 2,7 m2-column band saw for quick cutting, K-tech 800Hwith pusher system P 15. P 30 (option),Fast, quiet and ergonomic cuttingSpecial development for cutting profiles and beamsas well as solid material. The material is fixedvertically on and section sides. The machine is from K-tech 800 Hstandard with an additional horizontal viceequipped. The interaction of the hydraulicSaw frame lowering, material positioning and thePusher system is CNC controlled.The machines come standard with the environmentally friendlyB&S-Clean Cut cutting system” with minimal quantity lubricationequipped. This saves cleaning effort and is gentleReso ...

Key data: 1060 mm

Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...

cutting diameter: 330 mmcapacity 90 degrees: flat: 510 x 320 mmcapacity 90 degrees: square: 320 x 320 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgSemi-automatic, electro-hydraulic band saw machine for cutting60° left to 60° right.Versatile machine with a tape of 4640 x 34 x 1.1 mm for theCutting pipes, profiles and beams up to a maximum cutting rangefrom 510x320 mm to 0°.The control console on a swiveling arm allows for comfortable andsafe operation from any position.Electronic inverter for continuous belt speed regulationfrom 15 to 100 m/min.Large turntable with a diameter of 280 mm and engravedexact fine scaling, easily adjustable and stored.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 420 mm, 5150 mm, 420 mm

Elmag Giant Line 420 NC Drive motor 7.5 KW Hydraulic motor 1.5 KW Frequency-controlled saw blade drive 20-80m/min Powered chip brush Screw shavings conveyor Cutting data: Round max. 420mm Rectangle 420x420mm Saw blade length 5150x41x1.30mm Machine from stock / subject to prior sale. Make an appointment for a viewing.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 saw band length: 8140x54x1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,96 tdimensions of the machine ca.: 5,7 x 4,0 x 2,75 m2-column band saw for quick cutting, K-tech 1200Hwith pusher system P 30. P 60 (option),Fast, quiet and ergonomic cuttingSpecial development for cutting profiles and beamsas well as solid material. The material is fixedvertically on and section sides. The machine is from K-tech 800 Hstandard with an additional horizontal viceequipped. The interaction of the hydraulicSaw frame lowering, material positioning and thePusher system is CNC controlled.The machines come standard with the environmentally friendlyB&S-Clean Cut cutting system” with minimal quantity lubricationequipped. This saves cleaning effort and is gentleResourc ...

Cutting range round: 170 mm Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Belt speed: 150, 355 & 95 m/min Saw drive: 380 V, 0.75 kW kW Space requirement: 1400 x 600 x 800 mm Weight: 340 kg

cutting speed: 60-100 m/minengine output: 7,5 kWweight: 8800 kgHorizontal bandsaw manufacturer: Behringer, Horizontal bandsaw Automatic bandsaw type HBP 430Metal bandsaw, Band saw machine, bandsaw, Vertical bandsaw, Horizontal bandsaw, hydr. horizontal bandsaw machine, Semi autom, Band saw machine,Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.