used Beam machines for sale

table length: 2750 mmtable width: 2750 mmtable load: 80 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210070Type of machine Rotary tableMake ASQUITHType 2750/80Build in NBType of control conventionalX-stroke (mm) 2200Table dimensions (mm) 2750 x2750 Additional informationmax. table load 80 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 800 mmz-travel: 900 mmcontrol: HEIDENHAIN type: TNC 530 itnc mmrotary table dia.: 600 mmspindle taper: HSK 63 turning speeds: 18000 U/minworkpiece weight: 3000 kgTool changer: 30 Pos.: table - swivable: Gradtotal power requirement: . kWweight of the machine ca.: 12 tdimensions of the machine ca.: . mDEPO DYNAMIC 1009• X axis(milling unit/cross slide move across): 1,000 mm• Y-axis (crossbar moves lengthways): 900 (+170) mm• Z-axis (milling unit moves vertically): 600 mm• Feed / rapid traverse X, Y and Z axis: 40,000 mm/min• Acceleration X, Y and Z axis: 5 m/s2• Workpiece carrier – clamping surface (X/Y): 1,200 x 1,000 mm• Distance spindle nose / clamping surface: max. 750 mm• Main spindle 80 Nm, 30 KW (S1 / 100% duty cycle)- Electronic hand wheel• Chip disposal• Air supply through the inner spindle (ILZ)• Workroom enclosure complete wit ...

Special production plant of the brand Friulmac for the production of (standard) garden houses, wooden houses, log houses etc. System Block construction and block plank construction tools, milling and suction device. As good as new!

x-travel: 1700 mmy-travel: 400 mmz-travel: 400 mmControl: Siemens 480 D table width: 500 mmtable length: 2000 mmtotal power requirement: 16,25 kWweight of the machine ca.: 4750 kgdimensions of the machine ca.: 3000x 2500x 2800 mMachine number 9599- 4th axis / horizontal / diam. 315 mm- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used cutting machine Hundegger K1 Manufacturer: Hundegger, DE Type: K1 Built: 1998 Condition: used, in operation, good Available from: 06.2021 composed of: 1. Fully automatic wood conveying with feed roller conveyor 2. Lower table swivel crosscut saw 3. Universal milling unit 4 -axis 4. Combination support for horizontal tools 5. 2x Drill Rig - Drilling direction horizontal drill length: 6. 1x Chain slot unit 7. Combination support for vertically working tools with a servo drive, cross-moving on linear guides and up to 5 vertically working, hub-controlled tool slides 8. 2x drilling rig drilling direction vertically from below 9. 1x Finger cutter Vertical 10. Marking device 11. Fully automatic beam turning station 12. Transport and positioning device 13. Electronic control with operator put, on Windows XP

Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch  ...

SPECIFICATIONS: 5-axis joinery system Cross-sectional sawing unit Maximum working width in mm: 6,250 Load from mm: 11,000 Discharge from mm: 6,500 Vertical/Universal Milling Machine - Vertical Drilling Unit Horizontal Drilling Unit/Horizontal Milling Machine mm 600 Beam turning station

A used and well-maintained ABA from HUNDEGGER without planer, but with transfer cross conveyor. Type. Hundegger K2 – 5 axle 450 EKP control Year of construction 2007 5 strand feed cross conveyor 2200 mm wide Pull-out wooden shelf Under-counter swivel cross-cut saw – bottom open at the bottom for waste on conveyor belt Saw table chrome-plated Refined wooden support surfaces Saw blade diameter 800 mm Universal milling machine 5 axis – With finger milling cutter and dovetail milling cutter Control for disposal facility Front marking device Ink. Jet Markers Marker and marker at the bottom Chains – Rear Horizontal Slitting Device Finger milling machine at the bottom vertical 1 Drills down vertical 2 horizontal drill rigs, one of them swivel Pneumatic beam turning station With ÜGQF Without planer Weight of the ABA 15 t Pure machine length approx. 28 m withou ...

Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...

We are happy to offer: A new used and very well-maintained ABA from HUNDEGGER without planer Type. Hundegger K2i 450 – with 5 axles Year of construction 06.2017 Fully automatic timber conveying with Feed and feed cross conveyor for lengths of 13 m Under-table swivel cross-cut saw 11 KW Universal milling unit – 5 axes 1 drilling rig vertical 2.2 KW 1 drill rig horizontal 2.2 KW 1 drill rig hydraulic 3 KW vertical 1 hydraulic drill rig 3 KW horizontal 1 finger cutter vertical 5.5 KW 1 horizontal slitting device at the rear 8 mm x 480 mm 1 marking device at the rear – stop side 1 front marker 1 marking and labeling device at the back 1 InkJet 4 System HP stop side 1 fully automatic hydraulic beam turning station 1 placeholder for turret milling machine 4 compartments Refined machine surface 3 extensions of the discharge track Control unit with disposal an ...

A used and fully functional joinery machine of the HUNDEGGER type. K2i 625 - 5 axes, built in 2009, with the entire waste discharge technology under the joinery system (3 conveyor belts) EKP control, machine maintained. Facility immediately available, Location Germany, sale as visited.

Used cutting machine Hundegger K2 machining width 1250mm Manufacturer: Hundegger, DE Type: K2i - 5 1250mm Built: 2009 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed.  ...

We are happy to offer: 1 used and VERY well maintained HUNDEGGER SC 3 with full equipment. From 2016 200 mm version. TOP 1 a condition. Year of construction 2016 Available approx. Oct. - Nov. 2024 Technical equipment on request The entire system is insured against fire, storms, etc. until the day of dismantling. Full functionality is guaranteed in writing until the day of dismantling. In order to purchase the machine, a deposit of 70% of the sales price plus VAT must be made. The remaining payment is made exactly 6 weeks before the set dismantling date. The machine is sold as is from the Germany location without warranty. The machine can be viewed during operation after a written appointment has been made. The purchase price includes the removal of all anchors such as welding seams, air, electricity and loading using a mobile crane, but not the pure dismantling of ...

table surface area: 1400x1600 mmtable weight: 12000 Kgb-axis: 0,001 °x-axis: 2000 mmw-axis: 550 mmy-axis: 1800 mmz-axis: 1600 mmfeed: 12000 mm/minrapid traverse: w-achse 6000 mm/minB-axis (table): 4 U/min bar material dia. max.: 110 mmspindle: 22/25 kW0: 0-3000 U/mintool magazin:: 60 tool diameter: 125 mmtool length - max.: 400 mmweight of tools max.: 25 kgInternal cooling system: 20 barrange L-W-H: 7.100×6.200×3.980 mmweight of the machine ca.: 27000 kgtotal power requirement: 71 kW-Distance between spindle nose and table center 550-2,150 mm.-Distance between spindle center and table top 0-1,800 mm-Working feed of the X/Y/Z/W axes 1–6,000 mm/min-Number of areas 2-Automatic tool loader-Double longitudinal chip extractor-Cross chip extractor-Portable steering wheel-Pickup rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 2500 mmtable load: 40 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210059Type of machine Rotary tableMake SCHIESSType 25/30Type of control X-stroke (mm) 2.000Table dimensions (mm) 3.000 x 2.500Table rotation (degrees) 360 Additional informationMax. tableload 40 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...

table length: 2200 mmtable width: 2200 mmtable load: 16 tControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210063Type of machine CNC Rotary tableMake TOSType SK 16Build in nbX-stroke (mm) 1500 Additional informationTable size 2200 x 2200 mmmax. table load 16 toncontrolled by a machine with a Heidenhain TNC 426The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.