used Decoilers for sale

sheet width: 0150 mmcoil weight: 2 x 0,50 tcoil internal dia.: 250 - 650 mmcoil outside - diam. ca.: 1600 mm0: 1-10 U/minengine output: 2 x 0,75 kW, insgesamt 2 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- Spreading manually via hand crank- Separate control panel- Drive infinitely variable via SEW motors and converters- Rear contact washer, front limiting ring- Loop control via ultrasonic transmitter loopsSide guide including loop tensioning switch- Reel can be moved transversely +/- 50mm via ratchet- 4 protective bars for securing the coilMachine was only in operation for a short timeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0150 mmcoil weight: 2 x 0,50 tcoil internal dia.: 250 - 650 mmcoil inside-diam. ca.: 1600 mm0: 1 - 10 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- Spreading manually via hand crank- Separate control panel- Drive infinitely variable via SEW motors and converters- Rear contact washer, front limiting ring- Loop control via ultrasonic transmitter loopsSide guide including loop tensioning switch- Reel can be moved transversely +/- 50mm via ratchet- 4 protective bars for securing the coilMachine was never in production - it is like a new one !The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0600 mmcoil weight: 3,00 tcoil internal dia.: 465 - 530 mmtotal power requirement: kWweight of the machine ca.: 2,45 tdimensions of the machine ca.: 2,72 x 1,70 x 2,40 mmaterial width (previously) 400 mmmandrel length 630 (655) mmmandrel – Ø (expanding range) 465 – 530 mmheight floor - middle of mandrel 1.450 mmheight upper edge decoiler construction - middle of mandrel 1.050 mmworking direction (previously) right - leftaccessories:construction 3-segment-constructiondecoiler movable on base frame hydraulicallypress arm hydraulicallypress roll not drivenexpanding process mechanicallydecoiler motor driven (via chain) power 3,0 kWno. – limiting arms 6dimension – limiting arms (l x h) 410 x 180 mmvalve components mounted at decoiler constructioncontrol unit (breaker unit) with cablehydraulic unit not availableThe data for this ad was created with ModulMWS - the  ...

sheet width: 250 mmcoil weight: 2,5 tcoil internal dia.: 450 - 530 mmsheet thickness - max.: 4 mmcoil outside dia.: 1400 mmtotal power requirement: kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number: 0661202/0532203 Coil weight: max. 1000 kg Nominal belt width: 300 mm Outer coil diameter: max. 1200 mm Inner spreading range: 460 - 530 mm Coiler drive: 1.5 kW Belt thickness: min. 0.8 / max. 3.0 mm Draw roller diameter: 90 mm Straightening roller diameter: 60 mm Straightener drive: 3.0 kW With digital SIEMENS SIMATIC HMI controlApprox. Onsite Dimension. (l x w x h): 3,250 x 1,300 x 2,700 mm, weight approx.: 1,500 kg

Width 500 mm Load capacity 1500 kg coil outer diameter 1450 mm Spread 370- 630 mm Motor 1.1 kW Btto 400 kg

sheet width - max.: 0500 mmcoil weight: 1,50 tcoil internal dia.: 370 - 630 mmcoil external diameter: 1450 mmtotal power requirement: 1,1 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0600 mmcoil weight: 2 x 1,50 tcoil internal dia.: 370 - 630 mmcoil outside - diam. ca.: 1560 mm0: 12 U/minpower capacity: 1,1 kWtotal power requirement: kWweight of the machine ca.: 1,55 tdimensions of the machine ca.: 2,60 x 1,20 x 1,90 mdouble decoilerwith motor, manual expansion, coil loop controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0350 mmcoil weight: 2 x 1,50 tcoil internal dia.: 360 - 530 mmcoil outside - diam. ca.: 1600 mmpinch roll: pneumatisch total power requirement: kWweight of the machine ca.: 1,00 tdimensions of the machine ca.: 2,00 x 2,00 x 2,20 m- without drive- mech. Spreading with hydraulic. Hand pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0250 mmcoil weight: 0,500 tcoil internal dia.: 250 - 550 mmcoil outside - diam. ca.: 1150 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 750-900 mmcoil weight: 3,50 - 4,00 tcoil internal dia.: 400 - 500 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: kWweight of the machine ca.: 1,90 tdimensions of the machine ca.: 1,50 x 1,90 x 2,30 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double reel 2 x 2500 kg Bandwidth - up to 350 mm

sheet width: 300 mmcoil weight: 1,5 tcoil internal dia.: 400 - 500 mm: je Arm 670 mmtotal power requirement: kWweight of the machine ca.: 760 kgdimensions of the machine ca.: T 1,23 x B 1,7 x H 1,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load capacity 20 kN, strip width 450 mm, Coil inner diameter 445-530 mm Coil outer diameter 1400 mm Drive power 1.5 kW Rolling speed CONTROLLABLE with frequency converter Danfoss VLT 2800 Manual spreading of the reel crown Btto 600 kg

Capacity 20 kN, band width 500 mm, coil inner diameter 445-530 mm Coil outer diameter 1300-1400 mm Drive power 1.1 kW Rolling speed 16 U/min Manual spreading of the reel Crown with hydraulic unit complete documentation, operating instructions and manual

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

sheet width - max.: 320 mmcoil weight: 2,5 tcoil internal dia.: 380-630 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coil inner diameter 460 - 560 mm Coil outer diameter. Max. - 1500 mm Bandwidth - 350 mm Payload 2 t without drive, adjustable. Disc brake btto - 640 kg more info on request

sheet width - max.: 0350 mmcoil weight: 2,00 tcoil internal dia.: 460 - 560 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: kWweight of the machine ca.: 0,640 tdimensions of the machine ca.: mwithout driveDisc brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil weight: 1 tcoil internal dia.: 375-550 mmcoil outside dia.: 1600 mmweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1500x1500x1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity 10 tons Maximum band width 180 cm Pressure roller, etc. Complete documentation more info on request

sheet width - max.: 0340 mmcoil weight: 1,00 tcoil internal dia.: 265 - 565 mmtotal power requirement: kWweight of the machine ca.: 0,25 tdimensions of the machine ca.: 1,40 x 1,20 x 1,80 mconstruction: support segment – systemno. - support segments 3length – suppert segments 400 mmworking direction left-right / right-leftcounter ring – Ø 1.600 mmshaft – Ø 70 mmheight floor - middle of shaft 840 mmaccessories:construction - pedestal construction - rectangular tube positioned underdecoiler construction, to proceed the relocation by forklift or similarexpanding process manually by bevel gear wheelbrake system disc brakebrake caliper pneumatically, manufacturer TWIFLEXcounter ring 2 pc.option:decoiler equipped with shifting frame (by linear guiding)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 320 mmcoil weight: 1,5 tcoil internal dia.: mmcoil outside dia.: 1250 mm diameter of the mandrel: 370/430 mmMandrel height: 1000 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm

Technical data: -Weight of coil: to 3. -Strip width: 600 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. Coil outer diameter. 1500 mm

sheet width - max.: 0500 mmcoil weight: 2,00 tcoil internal dia.: 355 - 420 mmtotal power requirement: kWweight of the machine ca.: 0,93 tdimensions of the machine ca.: 2,00 x 0,95 x 1,75 mConstruction 4-jaw designSpread hydraulicallySpreading process tested (functioning properly)Manual disc brake (via star grip)Hydraulics attached to the reel constructionManual valve attached (via pipe) to machine constructionU-profile attached under machine construction(for mobile use of the reel)Floor height - center reel head 900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min

sheet width - max.: 0350 mmcoil weight: 1,00 tcoil internal dia.: 5570 - 750 mmcoil outside - diam. ca.: 1200 mmPay-off Speed: 30 m/minexpansion: hydraulisch Drive: regelbar total power requirement: kWweight of the machine ca.: 0,650 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0500 mmcoil weight: 2,00 tcoil internal dia.: 350 - 550 mmcoil outside - diam. ca.: 1400 mmexpansion: hydraulisch total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- Hydraulic spreading- 6 pieces of clip-on arms for lateral band limitation- Frequency-controlled drive- Loop control via ultrasonic transmitter- Free-standing control cabinet- Pneumatic pressure roller from above, can be moved laterally- Engine brake- Swivel hand control panel- Reel can be moved hydraulically- Loading chair can be swiveled 90°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board

sheet width - max.: 250 mmcoil weight: 150 kgcoil internal dia.: 290-550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mmcoil weight: 150 kgcoil internal dia.: 300-500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mmcoil weight: 250 kgcoil internal dia.: Ø 290-550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 300 mmcoil weight: 150 kgcoil internal dia.: 200-520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 350 mmcoil weight: 1 tcoil internal dia.: 360 - 475 mmweight of the machine ca.: 1 tdimensions of the machine ca.: BxTxH 1500x1500x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 350 mmcoil weight: 1 tcoil internal dia.: 360-475 mmweight of the machine ca.: 500 kgdimensions of the machine ca.: BxTxH 1500x1500x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0100 mmcoil weight: 0,150 tcoil internal dia.: 320 - 520 mmcoil outside - diam. ca.: 1200 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- manually adjustable brake- Rear handguard- Restriction ring in front- Movable on frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0400 mmcoil weight: 1,50 tcoil internal dia.: 470 - 630 mmcoil outside - diam. ca.: 1600 mm0: 12 U/mintotal power requirement: kWweight of the machine ca.: 0,850 tdimensions of the machine ca.: 1,70 x 1,40 x 1,70 mfrequency converterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

coil internal dia.: 260-600 mmcoil width: ca 150 mmOverall size: 800x1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0300/450 mmcoil weight: 2,00 tcoil internal dia.: 360 - 410 mmcoil outside - diam. ca.: 1000 mmexpansion: mechanisch brake: mechanisch total power requirement: 1,10 kWweight of the machine ca.: 0,530 tdimensions of the machine ca.: 1,40 x 1,00 x 1,40 m- with coil application arms, sheet metal width 300 mm- without front collar contact arms, sheet metal width 450 mm- Jaw length 450 mm- Belt running direction left-right- Bane loop control via dancer roller (start/stop)- Hand crank- 6 armsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Material width: 0300 mm Coil weight: 0.5 t Coil inner diameter: 270-360 mm Coil outside diameter: 1000 mm Speed: m/min Weight: 0,4 t JAWS: 200 mm extension of the diameter

sheet width: 300 mmcoil weight: 1 tcoil internal dia.: 350-450 mmweight of the machine ca.: 0,5 tdimensions of the machine ca.: BxTxH 1500x1500x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil weight: 1 tcoil internal dia.: 350-450 mmweight of the machine ca.: 1 tdimensions of the machine ca.: BxTxH 1500x1500x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. coil weight - 2000 kg Belt width 500 mm Coil external dimension - cca 1400 mm Pneumat. Pinch roller

Description: Power: 2.2 kW (straightener) Max. Load capacity of the reel: 2000 kg Max. Winding diameter: approx. 1500 mmApprox. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 2,500 mm, weight approx.: 3,000 kg

sheet width: 150 mmcoil weight: tcoil internal dia.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 150 mmcoil weight: tcoil internal dia.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 300 mmcoil weight: 2,5 tcoil internal dia.: 370-520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0500 mmcoil weight: 3,00 tcoil internal dia.: 370 - 510 mmtotal power requirement: kWweight of the machine ca.: 0,54 tdimensions of the machine ca.: 1,25 x 1,08 x 1,67 mmaterial width (previously) 300 mmmandrel length 500 (510) mmmandrel – Ø (expandig range) 370 – 410 mmdto. with segments 470 – 510 mmheight floor - middle of mandrel 1.050 mmheight upper edge decoiler construction - middle of mandrel 860 mmaccessories:construction 3-segment-constructionexpanding process mechanicallyno. – limiting arms 5dimension – limiting arms (l x h) 400 x 60 mmbrake unit mechanically (via star grip)no. – segments 9The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.