used Drilling And Milling Machines for sale

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg

- Digital display Heidenhain - Tapping device Table 580 x 280 mm Speed 40 - 3600 rpm Spindle diameter 65 mm Receptacle Aciera quick-change system Drilling spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

1 Milling machine CB Ferrari S70

MOVING COLUMN BORING MILLING CUTTER Good condition ECS 2301 Control X axis stroke 15.500 mm Y-axis stroke 3500 mm Z axis stroke 800 mm V axis stroke 1000 mm Boring spindle 160 mm ISO 50 - kW 55 - rpm 1600 Rotary table Colgar mod. TRT 1500 Dim. 2000 x 2500 mm - Movement 2000 mm - Load capacity max. 30 Ton 1st ground clamping table 2000 x 2000 x 350 mm (8 T-slots) Universal vertical head mod. TA 130 - 2 axes - ISO 50 PDB cone 2nd ground clamping table 2000 x 4000 x 350 mm (16 T-slots) 3rd/4th ground clamping table 4000 x 4000 x 350 mm (16 T-slots) Automatic tool change 60 positions Chip Evacuator Accessories

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Control : Heidenhain TNC 320 Travel X/Y/Z 500/ 250/ 160 mm Travel W 480 mm Clamping surface (L x W) 885 x 320 mm Permissible table load 250 kg Distance table - spindle nose 0 – 605 mm Feed speed X/Y 1 – 2000 mm/min Feed speed Z 1 – 1200 mm/min Tool – Quick-change system SF 32 Speed range infinitely variable 100 – 9000 rpm Drive power 5 kW Space requirement (W x D x H) 1850 x 2550 x 2400 mm

Accessories available. Fehlmann stage KS 240 Drilling tailstock digitized Table size 530 240 mm Route x 280 mm Y way 180 mm Speeds, electronic, adjustable with potentiometer 132-4500 RPM

- Digital display, Heidenhain 3 - axes - Fehlmann cross table: KS 321 D - Accessories: available Workspace: Quill stroke Z-axis 110 mm X-axis travel 450 mm Y-axis travel 260 mm Table spindle nose 0 – 527 mm Quick-change systems SF 32 Working spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space requirements W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 800 kg

- Digital display, Heidenhain 3 - axes - Fehlmann cross table: KS 321 D - Accessories: available Workspace: Quill stroke Z-axis 110 mm X-axis travel 450 mm Y-axis travel 260 mm Table spindle nose 0 – 527 mm Quick-change systems SF 32 Working spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space requirements W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 800 kg

Digital display Heidenhain. Accessories available. Workspace Travel longitudinal X-axis 450 mm Travel transverse Y-axis 260 mm Quill stroke Z-axis 120 mm Travel machine head W-axis 450 mm Rapid traverse XY: 1,500 mm/min Workroom Clamping surface L x W 770 x 320 mm Table (KS 321-M) Tool quick coupler system : SF 32 Working spindle Speed range (infinitely variable) 50 – 9200 rpm Dimensions Space required (width x depth x height) 1500 x 1480 x 2330 mm Weight Weight approx. 1,300 kg

Control: HEIDENHAIN TNC 124 Traverse path x/Y/Z 500/ 250 / 160 mm Travel W 480 mm Size (L x W) 885 x 320 mm Maximum table load 250 kg Distance from table - spindle nose 0-605 mm Speed x/Y 1-2000 mm / min Feed speed Z 1-1200 mm / min Tool - quick change system SF 32 RPM infinitely 9200 RPM 5 kW Dimensions (W x D x H) 1850 x 2550 x 2400 mm

Ref. -No.: 10347Manufacturer: FPTYear of construction: 2006Type of control: CNCControl: Heidenhain 530Country of origin: ItalienX-Travel: 12000 mmY-Travel: 3500 mmZ-Travel: 1500 mmTool Piece Magazine With: 80 Pcs./pcs.Spindle Speed: 3000 RPMDrive Capacity - Spindle Motor: 37 kWRound table 1 (lxw): 2500x2500 mmRound Table 1 - V: 2000 mmRotary table 1 max. load: 30000 kgRound table 2 (lxw): 2500x2500 mmRound Table 2 - V: 1500 mmRotary table 2 max. load: 30000 kgFurther information:

Ref. -No.: 10350Manufacturer: FPTYear of construction: 2012Type of control: CNCControl: Heidenhain 530Storage location: HalberstadtCountry of origin: ItalienX-Travel: 14000 mmY-Travel: 5000 mmZ-Travel: 1500 mmW-Axis: 1000 mmNumbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kWRotary table diameter: 3000x3000 mmRotary table travel V: 2500 mmRotary table max. Load: 80000 kgswivel angle: 180 °Further information:+3D M Sensor+CNC controlled angle head: micro

bore capacity in steel (diameter): 35 mmthroat: 230 mmbore stroke: 125 mmspindle taper: ISO 40 spindle turning speed range: 115 - 1750 U/min: 560 mm: 175 mmtable surface area: 1000 x 240 mmmax. distance between table and spindle-nose: 375 mmconnected load frequency: 400 Vtotal power requirement: 0,85/1,5 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 1,3 x 1,2 x 2,1 mDomestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolboxMachine base and X-axis feed optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mmthroat: 180 mmbore stroke: 85 mmspindle taper: MK 2 spindle diameter: 47 mmspindle turning speed range: 320 - 3300 U/min: 230 mm: 100 mmtable surface area: 420 x 155 mmconnected load frequency: 230 V: 900 x 600 x 300 cmtotal power requirement: 0,75 kWweight of the machine ca.: 8o Kgdimensions: 0,7 x 0,7 x 0,8 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca, 1988 tool taper: MK 3 weight of the machine ca.: 2,5 tdigital: cross-moving table: feed:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmbore stroke: 150 mmspindle taper: ISO 40 : 115 - 1750 mm: mm: 600 mm: 350 mm: 350 mmtable surface area: 800 x 240 mmmax. distance between table and spindle-nose: mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,6 x 1,4 x 2,1 mEquipment:- Digital display- Horizontal spindle- Quill with hand feed- motor feed for X- Left/right running- Emergency stop switch- Drill head swiveling- Spindle protection- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital display Heidenhain Thread cutting device Automatic pinole feed Electr. adjustable head (height) Coolant pump Table size 600 x 250 mm Recording MK 3 Speed Continuous

Offer 23318 Specifications: - Drilling capacity 28 mm - Drill spindle holder with tightening thread MK 3 - Tightening thread M 12 - Tapping device up to M 20 - Drilling spindle speeds in 2 steps infinitely variable 80 - 1400 rpm - Drilling unit manually height-adjustable - Smallest / largest distance table / milling spindle 170 / 840 mm - Drilling spindle stroke 100 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 600 x 240 mm - Table travel X-axis / Y-axis 350 / 160 mm - Coolant device - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 800 x H 1650 to 2300 x D 1000 mm - Weight approx. 550 kg

Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.

X travel: 6300 mm vertical travel Z: 1700 mm transversal travel RAM Y: 1000 mm Ortogonal head, 2 spindles Automatic head rotation 1°/1° with hirt spindle taper ISO 50 CNC Heidenhain Machine in good working conditions

CNC Model: Selca CNC version: 1200 Head type: Vertical spindle head Additional technical notes for the head: 2-spindle rotary Bi head with orientation in the 4 CNC dials 1° rotation possible with panel control Tool connection: iso 50 Spindle power: 20Kw Number of spindle revolutions: 1500 X Shaft Stroke: 6300mm Y Axis Stroke: 1000mm Z Axis Stroke: 1900mm Table dimensions: 8000 x 1200mm Guides: flat Cutter type: moving upright Mechanical range change: yes Number of ranges : 2 Other technical data: Machine completely in cast iron Selca absolute optical lines Centralized lubrication DC axis motors

Specifications: Drilling capacity steel: 24 mm Continuous drilling capacity steel: 20 mm Drill-milling head vertical: +/- 45° Milling head horizontal: +/- 90° Table size: 1370 x 254 mm Travel X / Y / Z - axis manual: 820 / 410 / 400 mm X / Y / Z - axis automatic: 740 / 330 / 320 mm Distance vertical spindle - router table max.: 405 mm Spindle mount: SK40 Projection: 420 mm Speed range, infinitely variable: (2) 60 - 4200 1/min Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04 / 0.08 / 0.15 mm/rev Milling head Y - axis: 470 mm Connection: 400 V Total power: 3 kW Weight, approx.: 1260 kg Dimensions (WxDxH), approx.: 1820 x 1850 x 2230 mm Equipment: - 3-axis digital display - Infinitely variable speed control - Coolant device - Clockwise / anticlockwise rotation - Motorized feed in the X, Y and Z axes - Drilling depth stop and scale - Cross table wit ...

bore capacity in steel (diameter): 20 mmx-travel: 480 mmy-travel: 175 mmspindle taper: BT 20 throat: 170 mmtable-size: 700 x 180 mmstroke of quill vertical: 45 mmspindle turning speed range: 90 - 3.000 U/minboring head turning: ±60 °voltage: 230 Vtotal power requirement: 950 Wweight of the machine ca.: 120 kgdimensions of the machine ca.: 0,75 x 0,65 x 0,95 m- Serial-No.: 10872302- 3-axis digital display- incl. accessories worth of 500 EUR + VAT as follows: - Collet chuck ER16 - Collet chuck set ER16 - Cutter head holder Ø16/BT20 - Cutter head Ø 52 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MOVING COLUMN MILLING MACHINE Condition Used Very good condition Control type Selca S 3045 X axis stroke 6.500 mm Y-axis stroke 1.900 mm Z axis stroke 1.200 mm Automatic tool change 40 positions Fixed table 8.000 mm Rotary table 1.200 x 1.200 mm Chip Evacuator Accessories

MOVING COLUMN MILLING-BORING MACHINE Condition Used Very good condition Control type Selca S4060-D Table length 2.800 mm Table width 1.100 mm Table height 210 mm T-slot dimensions Centre 22H7 - Others 22 H8 Number of T-quarries n. 7 T-slot spacing 160 mm Max. permissible weight 10.000 Kg X axis stroke 2.500 mm Y-axis stroke 1.675 mm Z axis stroke 1.250 mm Fast 30.000 mm/min Axle motor torque 58 Nm Automatic head Axis A 2,5° - Axis B 1° Spindle cone ISO 50 DIN 69871 Rotational speed 5,000 rpm Spindle power 17 Kw Tool change 40 positions N. 2 constant power speeds I range 250-1250 rpm - II range 1000-5000 rpm Clamping system BERG pliers Selbox S2 remote flyer

bore capacity in steel (diameter): 20 mmthroat: 195 mmbore stroke: 80 mmboring spindle: MK 2 table surface area: 320 x 300 mmtotal power requirement: 0,75 kWweight of the machine ca.: 0,072 tdimensions of the machine ca.: 0,7 x 0,4 x 1,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UWM BORING MILLING MACHINE TYPE 40A -MK4 -75/1600 t/m -Draait right en linksom -Tapfunctie -Boorgedeelte is in hoogte verstelbaar -Boorgedeelte is kantelbaar -Tandwielaangedreven -Beschermkap -Noodstop -Boorkop Zelfspannende -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

bore capacity in steel (diameter): 16 mmthroat: 185 mmbore stroke: 50 mm: 20 mmspindle taper: MK 2 spindle diameter: mmspindle turning speed range: 100-1500 / 200-3000 U/min: 175 mm: 280 mmtable surface area: 500 x 180 mmconnected load frequency: 230 Vtotal power requirement: 0,85 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,86 x 0,6 x 0,9 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.