used Drive Systems Powered By Electric, Hydraulic Or Pneumatic Energy for sale

With the Easy Clean System you can clean components of 3D Systems MultiJet printers such as the ProJet 2500Plus very easily and quickly.

Operating hours: 66511 Filling: Accura Xtreme grey Condition: Buildable, limited build quality until the following repairs are completed: Repair #1: Optics and profiler exchange, offer manufacturer: 8,973.45 EUR Repair #2: replacement of the load cell and VAT electronics, offer manufacturer: 4,206.25 EUR, Installation space in mm (x/y/z): 650x750x550mm, operating hours: approx. 67000h, Dimensions in cm (w x h x d): 126x220x228cm, Weight in kg: 1500KG

3D Systems LC3D print box for sale. All lamps are functional and in good condition. The LC-3D Print Box is a light-based UV post-curing device specially designed for post-curing 3D printing materials. The LC-3DPrint Box is equipped with 12 UV lamps. This ensures that the part is illuminated from all directions, resulting in a fast and even curing cycle. The spacious interior of the LC-3DPrint Box allows multiple products to be cured at the same time. In addition, the box offers enough space to place an articulator. If necessary, the UV lamps can be easily changed. Advantages of the LC-3DPrint Box - Full light spectrum (300-550 nm) - Short polymerization times - Controllable temperature for optimal curing - Noiseless - Objects are illuminated from all sides - New post-processing process (without additional nitrogen) - Flexibility in setting exposure times - A single device that can be use ...

Smaller than a coffee machine, the ProJet 1200 from 3D Systems is suitable for everyday use and especially for the dental and jewelry industries. The post-processing unit is integrated in the device., Layer thickness: 0.03mm, resolution xy: 56 microns (effective 585 DPI), Vertical build speed: 14mm per hour, Installation space in mm (x/y/z): 43x27x180mm, building material: VsiJet FTX, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 230x230x370, Weight in kg: about 10, Power supply: 100-240V 50/60Hz, software: 3DSprint (not included), file formats: STL

Smaller than a coffee machine, the ProJet 1200 from 3D Systems is suitable for everyday use and especially for the dental and jewelry industries. The post-processing unit is integrated in the device., Layer thickness: 0.03mm, resolution xy: 56 microns (effective 585 DPI), Vertical build speed: 14mm per hour, Installation space in mm (x/y/z): 43x27x180mm, building material: VsiJet FTX, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 230x230x370, Weight in kg: about 10, Power supply: 100-240V 50/60Hz, software: 3DSprint (not included), file formats: STL

A ProJet 2500Plus from 2017 is being sold. The device is in perfect condition, test printing is possible (compensation for expenses, which will be charged upon purchase)., Accessories: EasyClean system from 3D Systems, second construction platform, Technology: MultiJet Printing

ProJet 2500 Plus in very good condition, last maintenance 03/2024. Accessories: 3DS-MJP-ECS 93902324 consisting of MJP EasyClean System 230V and post-processing system, originally packaged particle filter 93902710, Installation: 2020, Print modes: HD - High Definition, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, resolution (xyz) resolution (xyz) hd mode: 800 x 900 x 790 DPI; 32μ (0.0012 in) layers, Support materials: VisiJet® M2 SUP, Building material build material: VisiJet® Armor M2G-CL – Tough,clear ABS-likeVisiJet® M2R-CL    – Rigid clear, clear polypropylene-likeVisiJet® M2R-GRY – Rigid grayVisiJet® M2R-WT   – Rigid whiteVisiJet® M2R-BK    †...

Sell a used 3D printing system, Manufacturer: 3D Systems, Type: ProJet 3510 SD 3D Printer, Printing mode: High definition, nice space (xyz): 298 x 185 x 203 mm, resolution ( xyz): up to 375 x 375 x 790 DPI/ 32 layer thickness, accuracy (typical): 0.0025 - 0.05 mm each 25.4 mm of partial dimension, email notification: yes, remote monitoring: yes, uvm Build Hours 953h In addition, a CAD program: 1 pc. Solidworks Network Installation FEE. 1 Liz. Solidworks 2015 Standard 3D â CAD. 1 Liz. Solidworks Professional 3D â CAD. 1 pc. MoldWorks + SplitWorks + ElectrodeWorks. 1 Liz. Solidworks Plastics Standard. SUB End of April 30, 2017

Brand new print head for 3D Systems ProJet 3600 MultiJet Printer

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed building material under 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400,  ...

3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available.

3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available.

3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available.

3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available.

ProJet 860Pro ColorJet Printer 3D printer used from 3D Systems for sale., Accessories: depowdering station, All specifications and operating/installation conditions according to manufacturer brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Dimensions machine in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Machine dimensions in mm (wxhxd): 1190x1160x1620

3D Systems ProJet UV Finisher for sale. All lamps are functional and in good condition., Machine dimensions in mm (w x d x h): 420x420x480, Weight in kg: 12, Power supply: AC100~240V 50/60Hz, 2.0A

Length: 2200mm, width: 1260mm, height: 2280mm, weight: 1.59t, operational hours counter: 66,511h.

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Aasted Type: AT 2000 disc tempering machine for chocolate YOM: 1971 output: from 750 to 2.000 kg/hour. electrical: 380/400 VAC different: working order I offer this machine in as-is where-is condition

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

Stock number: 3772 WELDING ROBOT Manufacturer: ABB ROBOTIC, Type: IRB 2400 L- 6 axis Machinen NR.: 24-12947, YOC: 1999 Specifications: ROBOT TYPE ABB IRB2400 x 2 Ansahl Aschsen 6 pcs. weight 1-5 kg Working range 3421 mm Control abb Fabr. Accessories Manipulator Model IRBP 250 K Rotary table 250 mm

Lifting capacity: 6300 kgHoist height: 6000 mmSpan length: 17252 mmType: Overhead Crane   Make Abus 6.3 ton Type ELV Year 2003enkelligger bovenlloop kraan length (mm)Span = 17.252 Height = 6.000 Cap = 6.300 kg Weight 5.015 Kg Lift = 0.8 - 5 M/min Hoist = 5/20M/min Number APC.Drive = 10/40 M/min Free in Okt 2015  

Face driver, face driver, face driver, driver tip, face driver, face driver-Manufacturer: ABW, face driver 4 pieces-Type: MS3-Intake: MK3-Forehead dimensions: 1x Ø 22 mm / 3x Ø 32 mm-Price per piece

Face driver, face driver, face driver, driver tip, face driver, face driver-Manufacturer: ABW, face driver-Type: MS6-Forehead dimension: Ø 90 mm-Recording: see photos-Dimensions total: Ø 110 x 315 mm-Weight: 8.5 kg

Face driver, face driver, face driver, driver tip, face driver, face driver-Manufacturer: ABW, face driver-Type: MS6-Holder: MK6 / M42, see photos-Total dimensions: Ø 108 x 278 mm-Weight: 7.9kg

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

Accu-Sort Axiom-X 2L Barcode ScannerRA2283Manufacturer: Accu-SortModel: Axiom-XNumber of lasers: 2Maximum scans per second 1120 SPSVoltage: 230V AC (12-30V DC) , 24V outputSize L 311 mm x W 354 mm x D 176 mmWeight of scan head 6.6 kg Mounting bracket: 1.9 kgCable base 0.8 kg Power supply unit 1.1 kgHousing Powder-coated cast aluminum, high-impact plastic, protection class IP54Operating temperature: 0° to +50° CStorage: -20° to +70° CRelative humidity 10% - 90% non-condensingLaser type Visible laser diode 650 nM (standard)Power consumption < 40 WOptical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs)Barcode types All standard 1D symbologiesConnections Dedicated setup connection, optional RJ45 connection for EthernetCommunication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relaysCommunication Optional D ...

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

The Aerzen blower unit, which was manufactured in 1986, is a reliable and powerful solution for various applications. With an operating pressure of 1.05 bar, it provides the necessary compressed air for industrial processes, ventilation systems or other applications. The blower unit has been carefully manufactured and is characterized by its durable construction and efficient performance. It is designed to generate high airflows while maintaining stable operating pressure. We would like to assure you that we can offer you the best possible price for this blower unit. The price is negotiable, so we can respond flexibly to your requirements. If you would like more details about the blower unit or have any questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. Contact us today to learn more about this Aerzen blower  ...

Cooler as seen in photos

High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68  ...

AFS 4000 Air Purify AFS 4000 Air Purify all separation and filter elements as well as with connection for cooling lubricant recirculation Air capacity:4,000 m3/h Device suction capacity Rated electrical data: 3, 380...480 V, 50/60 Hz2.68 kW, 4.1 A, Power consumption:2.2kW, operating point Weight:approx. 150kg Dimensions 800mm wide 1800mm long incl intake nozzle1050mm high Suction mares 4 pieces each approx. 200mm diameter Suction nozzle shut-off valve diameter 150mm

4 up Thermal Agfa Acento E Year 2005 With Harlequin Rip Price: on request

4 up thermal CTP Manufacturer: Agfa Model: Acento-S Built 2006 size 660 x 830 mm Min. size 324 x 370 mm Autoloader Inline punch Stacker Chemical free Include Rip (Apogee 8) + Software Price: on request

4 up Thermal CTP Agfa CTP (Thermal) Model: Acento-S Built: 2006 size 660 x 830 mm Min. size 324 x 370 mm Autoloader Inline punch Stacker Chemical free Include Rip (Apogee 8) + Software Price: on request

Thermal CTP AGFA Avalon LF year 2007 73,000 sqm produced with AGFA Apogee Prepress Manager Price: on request

Thermal CTP AGFA Avalon LF S year 2006 with AGFA Prepress Workflow Price: on request

4 up thermal CTP AGFA Avalon N4 year 2010 with AGFA Apogee RIP with Cleanout unit 46.000 plates produced

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

with skid (pallet) auto-loader for pallet processing incl. two bases for picking up the pallets, maximum panel format 1,750 x 1,400 mm, minimum panel format 650 x 550 mm, Resolution 2,400 dpi, Inline punching system, Optionally, an Arkana 150 development machine (built in 2020) and Parts of a Nela SF-Bender panel automation system (built in 2020), transport and installation worldwide, Price on request

4 up thermal CTP AGFA Avalon N4 year 2010 with AGFA Apogee RIP with Cleanout unit 46.000 plates produced

4 up thermal CTP AGFA Avalon N4 year 2014 32 diodes with AGFA Apogee RIP Price on request

4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request

4 up thermal CTP AGFA Avalon N4-30X with L300 Platemanager year 2019 ONLY 200 plates produced Price: on request

8 UP Thermal CTP Avalon N8 50 XT year 2008 250,000 plates produced MAL 4 cassettes, 2 punches bacher 425W 780W bridge Arkana 125 online-processor ethernet to PIF interface Price: on request