Flat, Bar And Section Shears used for sale (14)

Specifications: Weight approx. 3 to Drive power 8.5 kW Height approx. 2.1 m Width x depth approx. 2 x 0.8 m Perforated punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm Flat steel shears : 500 x 18 mm Notching device with rectangular tool up to 13 mm Sectional steel shears, L-steel, 90° mm

: neu : ca. 10 Wochen ab Auftrags : Spanien : 35600 €: 679.96 €: 110 to: 610 mm: 5 : 40/20 bzw. 28/28 mm: 80 mm: 28 1/min: 600x15 / 400x20 mm: 152x152x13 mm: 50 mm: 13x52x90 mm: 9 kW: 2690 mm: 1400 mm: 2200 mm: 3300 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 25700 €: 490.87 €: 80 to: 500 mm: 5 : 40/14 bzw. 24/24 mm: 70 mm: 40 1/min: 450x15 / 300x20 mm: 130x130x13 mm: 45 mm: 12x52x90 mm: 9 kW: 2310 mm: 1200 mm: 2050 mm: 2400 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTec ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 €: 947.36 €: 130 to: 600 mm: 5 : 2 : 50x18 mm: 80 mm: 600x18 (max. 600x20 mit D mm: 120x120x11 (max. 150x150x mm: 45/40 mm: 130x12 mm: 250x12 mm: 15 kWhydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V50 and V90flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttingtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 30800 €: 588.28 €: 85 to: 300 mm: 5 : 40/15 bzw. 24x24 mm: 450x15 / 450x18 mm: 475 mm: 130x130x13 mm: 45/40 mm: 12 mm: 200x12 mm: 9.2 kW: 2300 mm: 1200 mm: 2100 mm: 2400 kghydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V40 and V70flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttingtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 36000 €: 687.6 €: 85 to: 500 mm: 5 : 40/15 bzw. 24x24 mm: 450x15 / 450x18 mm: 475 mm: 130x130x13 mm: 45/40 mm: 12 mm: 200x12 mm: 9.2 kW: 2300 mm: 1200 mm: 2100 mm: 2400 kghydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V40 and V70flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttinghydraulic downhold for flat- and angle stationtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 19600 €: 376.32 €: 55 to: 500 mm: 5 : 40/10 bzw. 20/20 mm: 20 mm: 37 1/min: 300x15 / 200x20 mm: 10x42x90 mm: 5 kW: 2100 mm: 1160 mm: 2090 mm: 1750 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformationby diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, Ankörnvorrichtungoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090054 : prompt, Zwischenverkauf v : Spanien : 17300 €: 298.94 €: 1 : 15570 €: 55 to: 250 mm: 5 : 40/10 mm: 20 mm: 37 1/min: 300x15 mm: 120x10 mm: 40 mm: 10 mm: 5 kW: 1670 mm: 1160 mm: 2090 mm: 1390 kg2 foot pedal for independent working on 2 stationsflatsteel stationanglesteel stationround- and square steel stationrectangular notching stationpunching stationtable on flat steel stationtable on punching stationtable on notching stationcomplete with hydraulic oiluser manual in GERMAN and ENGLISHOPTION:Kit € 930,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2009 : 9725 : prompt, Zwischenverkauf v : Spanien : 14700 €: 1 : 110 to: 300 mm: 5 : 2 : 40x20 (28x28) mm: 80 mm: 17 1/min: 600x15 (400x20) mm: 605 mm: 152x152x13 mm: 50/50 mm: 90x52x13 mm: 5 kW: 2130 mm: 1200 mm: 2200 mm: 2500 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shear with hydraulic downholderangle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholderround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 22400 €: 430.08 €: 80 to: 300 mm: 5 : 40/14 bzw. 24/24 mm: 70 mm: 40 1/min: 450x15 / 300x20 mm: 130x130x13 mm: 45 mm: 12x52x90 mm: 9 kW: 2310 mm: 1200 mm: 2050 mm: 2070 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformation by diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmstandard hydraulic, centring deviceoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISH(sample photo shows mod. hyd 80 SD) option ",Kit", EURO 970,--length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Fur ...

: neu : 2026 : 090195 : Mai 2026, Zwischenverkauf : Spanien : 15800 €: 303.36 €: 1 : 50 to: 177 mm: 5 : 1 : 31 x 12 mm: 34 1/min: 350 x 15 mm: 80 x 8 mm: 35 / 30 mm: 10 mm: 100 x 10 mm: 3 kW: 1300 mm: 1100 mm: 1850 mm: 950 kgwith bending stationcapacity 50 to5 working stationsflat steel shear with device to reduce deformation350 x 10 mm with adjustment 2°350 x 15 mm with adjustment 5°angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mmrecangular notcher 90 x 42 x 10 mmpunching station 31 x 12 mmpress brake device for flat steel max. 100 x 10 mmtable at flat steel stationtable at notching stationmanual backgauge with electric contact2 dies V40 and V70gap at punching station 177 mmvertical movement of all stations (nor radial)hydraulic drive1 foot releaseuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS  ...

round bar steel: 45 mmsquare edge steel: 45 mmL-beam: 12 mm: 40 flat steel: 450x15 mmL-beam 90°: 152x152x13 mm: 45 mmsquare edge steel: 45 mm: 12 mmweight of the machine ca.: 2323 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 28 mmsquare edge steel: 25 mmL-beam: 80 x 8 mmnotching cap. mild steel max.: 7 mmcutting capacity of the vertical shear: 350 kNPunch power: 190 kNshear: flat material: 100 x 11 mmshear: length of knifes: ca. 175 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions of machine L x W x H: 1,0 x 0,5 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hole diameter in sheet thickness: Ø 30 in 12 mmhole diameter in sheet thickness: Ø 19 in 19 mmpressure capacity max.: 45 toweight of the machine ca.: 1.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.