similar results found in category other machines for plastic
ABG Omega SR 410 from 2010 with 2 flexo printing units 2 diecutters with one GapMaster from Kocher & Beck Manufacturer: AB Graphics Type: SR 410 Year of production: 2010 Flexo printing units: 2 units Rotary die cutting untis: 2 GapMaster: Yes one of the die cutters is Gapmaster Turning bar: Yes Nip rollers: Yes UV System: GEW Please contact us for more information or pricing. Machine is available immediately
Bowl cutter Alexanderwerk is equipped with a head with 6 knives, which easily cuts the product and has a noise absorbing cover made of transparent special plastic. The cutter is suitable for every food industry plant where cutting and emulsion of the product is required. Manufacturer: Alexanderwerk Model: 100l Height: 1500 mm Width: 1700 mm Length: 1500 mm Weight: 500 kg Capacity: 100 l Electric power supply: 400V 50Hz 3N
Cutter Alexanderwerk Dimensions: 160x140x110cm Electric power: 18kW Volume: 65 liters
Vacuum cutter Alexanderwerk Body made of stainless steel Volume: 65 liters Dimensions: 130x120x130cm Electrical power: 15/20kW
Alexanderwerk cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 120 depth: 100 height: 130 Main motor power: 15 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment
General SKU004Y068 LocationBarneveld MakeAlexanderwerk TypeGKM No.21313 Year of constructionunknown Main Features MaterialStainless steel Motor1.3 KW Specified Features - Vegetable cutter MaterialAluminium, Stainless steel Vegetable cutter/Planetary mixer (1x) With motor1,1/1,3 KW, 380 Volt With hoppercheck Information Mounted on legscheck Mounted on wheelscheck With switchcheck Extra Specifications- With Schneidaufsatz - With Zweikammeraufsatz - With Planeten-Rühr- und Schlagmaschine type PMA-20 Vegetable cuttersAlexanderwerkMills > Vegetable cuttersBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Aleanderwerk KN 20 Zwilling Combination machine consisting of bowl cutter and meat grinder Bowl cutter with 20 l bowl volume Knife head with 3 pcs. included Two cutting speeds: 1. 1500 RPM. - 2. 3000 RPM. Stainless steel bowl Including thermometer for temperature indication Meat grinder 82 mm diameter Two grinding speeds Including brand new cutting set Machine sits on a movable frame with 4 rolls
Vacuum cutter VK 125 STL bowl 125 l, knife speed from 300 to 4200 rpm., Ejector hydraulic, without feeding, 6 cutter head, Busch vacuum pump, connected load approx. 40.0 kW Vakuum bowl cutter VK 125 STL,, Bowl volume 125 l, knife speed from 300 till 4200 rpm., unloader, without loading system, knife head with 6 knives, Busch vacuum pump, Power approx. 40.0 kW
– Capacity 50 tons – Hydraulic – 4 stations – Foot control – Electric backgauge - Emergency stop Ebhzaoz – With 10 stamps (8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm) – Peddinghaus punching recording – Documentation – 400 V
CATALOG NUMBER 6056 TECHNICAL DATA - max height of the processed material 250mm - working length of the spindle 260mm - 40mm spindle diameter - worktop length / width 630x360mm - guide - 9.3 kW engine - 2 material clamps - pneumatic - diameter of the extraction connector 2x120mm - air demand 8bar - dimensions length / width / height 1370x980x1620mm - weight 450 kg - unpainted - cutters included, 2 pcs - Italian production - used milling machine, very good condition Net price: PLN 22900 Net price: EUR 5264 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations, the price may change)
Bettcher Power cleaver / slicer Model: 39 Stainless frame, six product chutes on turntable, with stainless circular blade for slicing, ideal for slicing salami / pepperoni etc
Control: Fidia C20 with handwheel Areas of work X-axis: approx. 5,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and distance: 10 x 22H8 / 255 mm Milling spindle Spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Tool tensioning: manual with union nut Drives Linear axes Caiquw7evf Feed speed X-, Y-, Z-axis: up to 20 m/min Axle acceleration X-, Y-, Z-axis: up to 1.5 m/s2 Connection data Connected load: approx. 28 KW Fuse: 63 A Dimensions, weights Machine space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Condition of the machine Fully functional condition, regular maintenance by machine manufacturer. Machine already dismantled and stored. At call!
Control: Fidia C20 with handwheel Areas of work X-axis: approx. 5,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and distance: 10 x 22H8 / 255 mm Milling spindle Spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: 78/8 flange Tool tensioning: manual with union nut Drives Linear axes Caiquw7evf Feed speed X-, Y-, Z-axis: up to 20 m/min Axle acceleration X-, Y-, Z-axis: up to 1.5 m/s2 Connection data Connected load: approx. 28 KW Fuse: 63 A Dimensions, weights Machine space requirement: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Condition of the machine Fully functional condition, regular maintenance by machine manufacturer. Machine already dismantled and stored. At call!
2006 Bos Machine (BMH) with a Sapiens Bos Machine (BMH) with a Sapiens Bos Machine (BMH) with a Sapiens Wood We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Boss Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling mot ...
Bos Machine (BMH) with a Sapiens Wood bosmachines We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: ...
ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm
ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm
Type: Microcutter Brundeler Holeplate diameter 175 mm Capacity: up to 2500kg/h Hopper capacity: 150 liter Machine dimensions in сm: Length: 170 Width: 80 Height: 105 Power: 37 kW Delivery time: 20 working days after payment
With air systhem Year 1998 Maximum paper size 80 x 120 cm Completely clean, prepared and checked
SECOND-HAND TRANSVERSAL MILLING MACHINE FOR CHAIR COMPONENTS CAMAM MOD. FS-S/1U - CE RULES - Max tools diam. 200 mm. - Rotation speed rpm/1 500 - Motor 3 kw - Exaust hood diam. 100 mm. - Exaust air cosumption m3/h 900 -Volt. 380/50 - S/N 99008 - Year 1999
Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller
SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P -Volt. 380/50 - S/W 76 - CE year 2003
Carousel Copy Milling Machine - CAMAM GC 1F Pneumatic vertical sliding front protection 7.5 kW (10 HP) cutter motor workable diameter from 200 to 1000 mm dimensions for transport (machine and protection) 180x240x150h cm weight 1000 kg
CAMAM rotary milling machine for large workpieces Spindle diameter 35mm Spindle height 130 Maximum workpiece radius 440mm Pneumatic clamping of the material Motor power 7.5kw Net price
Code: 0631 Brand: CASADEI INDUSTRIA Model: V 20/10 - CE Standard Automatic edge bander for pre-glued edges on straight panels - CE Standard Technical data: Automatic feeder for panel advancement Automatic end trimmer for front and rear edge trimming Automatic trimmers - Speed rpm 9000 - cutters diameter mm 70 Z=4 Panel thickness min/max mm 10/50 Roll edge thickness mm 0,4-2,5 Edge height min/max mm 12/52 Feeding speed mt/min 5 Total power 4 Kw N° 2 suction inlets diameter 60 mm Overall dimensions: mm 2300 x 700 x 1250 h Weight kg 350
Vacuum cutter 325 Litre(s) Blade speed infinitely variable, 60 – 4100 rpm Mixing speed infinitely variable Cutter bowl speed infinitely variable Engine power: 120 to 137 kW Noise protection cover V2A Electro-hydraulic feeding electro-hydraulic meat ejector
325 Liter CFS / Krämer + Grebe Vacuum Cooking Cutter Type: CMV 325 infinitely variable blade speed infinitely variable mixing process Load for 200 litre cutter wagons Ejector built-in vacuum pump Cooking equipment completely stainless steel used as by the customer not outdated, ready to use
Three knife trimmer Make Challenge Model CMT-130B Year 2013 Serial 13040569 Min untrimmed size 171 x 178 mm Max untrimmed size 330 x 241 mm Stack height 51 mm Speed up to 200 cycles per hour in single stream mode or up to 500 books in multi stream mode Change over time Fully automatic within 10 seconds Details 58500B book pile feeder + 58000 vertical stacker Available direct
Three knife trimmer - in-line Make Challenge Model CMT-330 Year 2005 Serial 05010048 Min untrimmed size 178 x 127 mm Min trimmed size 148 x 100 mm Max untrimmed size 330 x 330 mm Max trimmed size 307 x 328 mm Stack height 51 mm Min trim 2.5 mm Max trim 152 mm Speed up to 400 cycles per hour in single stream mode Memory up to 99 set-ups Change over time Fully automatic within 20 seconds Details 56600 Tilt in-feed conveyor + 56421 cooling down elevator + 56420 exit conveyor, this machine can be used in-line with a perfect binder Available direct
Three knife trimmer Make Challenge Model CMT-330-B Year 2010 Serial 10040217 Min untrimmed size 178 x 127 mm Min trimmed size 148 x 100 mm Max untrimmed size 330 x 330 mm ( Max trimmed size 307 x 328 mm Stack height 51 mm Min trim 2.5 mm Max trim 152 mm Speed up to 400 cycles per hour in single stream mode and 700 in Multi stream mode Memory up to 99 set-ups Change over time Fully automatic within 6 seconds Details 56416 manual in-feed conveyor + 58000 vertical stacker Available direct
SECOND-HAND MILLING MACHINE FOR CORNER SEATS COMEC MOD. FAS2 - S/N 951106 -Volt. 380/50
A vacuum former used in the illuminated sign making industry, but has other applications as well. Bought in December 2017, has been used less than 100 hours. In a very good condition. Manufactured by Computerized Cutters Inc. Original price 43 545€. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch ) Sheet size 1500 x 2000 mm ( 59 inch x 79 inch ) 2. Minimum thickness 2 mm ( 0.078 inch ) 3. Maximum thickness 5 mm ( 0.196 inch ) 4. Maximum size to form 1300 mm x 1800 mm ( 51 inch x 110 inch ) depending on used material and form of the mold. Material PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Vacuum pump. Type 12 PBO Capacity 7 CFM (12 m3 / hr) Vacuum 10 mbar ( 0,145 PSI ) Vacuum. Used vacuum level-0.9 bar ( -14.5 PSI ) Content v ...
General SKU094Y625 LocationBarneveld MakeCondux TypeHR9/N3 No.92 Year of construction1988 Main Features MaterialStainless steel Motor13 KW Specified Features - Cutter MaterialStainless steel Cutters GrinderSlicer/chipper (1x) Rotor sizedia. 900mm Inlet480x160mm, Outlet 700x250mm Motor± 13,0 KW Information Floorspace1,3x1,2 M Total height1,8 MCuttersConduxMills > CuttersBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000
Code: 0135 Brand: CPL - ITALY Model: IF Cut- off milling machine for making parallel joints on drawers, various parts of furniture, wine and liquor boxes, cigar boxes, gift boxes and beehives for beekeeping Technical data: The parts are machined in packs automatically. Depending on the type of milling cutters, different types of joints can be made Working width mm 450 Unlimited working length Sawing unit: Blade diameter mm 250 - Motor Hp 4,5 - Blade transversal adjustment Cutter group: Diameter mm 180 - Motor Hp 7,5 N: 2 pneumatic clamping presses Operating pressure 7 Atm Overall dimensions: mm 1000 x 1100 x 1450 h Weight kg 720
REF-1059 CHOP CUTTER CRM NEXUS 220 Manufacturer: CRM (COSTRUZIONI-REVISIONI-MECCANICHE) Model: Nexus 220 Year: 2003 Entirely built in stainless steel Power: 4kW 220/380V, 50Hz. Three-phase Inner dimensions: - Max. piece length: 900mm - Max. piece height: 260mm - Max. piece width: 220mm Outside dimensions: Length 2,130mm, width 800mm, height 1,200mm
Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes
Dadaux TITANE 45 Liter Cutter Stainless Steel used Stainless steel cutter with 6 cutter head and knife shaft brake Two speeds for knife shaft and bowl Machine has the following defects: Screw for plaster opening is missing 4 feet missing Noise protection cover broken Main switch toggle broken Lamp cover of the control panel is missing Bowl runs slightly out of round The shortcomings have already been taken into account in the pricing Video about test run available
Dayuan MHK-1050 CE Age: 2021 fully automated B1 size diecutting machine. Diecuts sheets from 100 gsm to 3 mm corrugated cardboard. Speed is up to 7000 sheets per hour. Max sheet size: 1050 x 750 mm Min sheet size: 400 x 360 mm Max diecutting size: 1040 x 720 mm Gripper margin: 9-17 mm Inner chase size: 1080 x 745 mm Stock range: 80-2000 gsm cardboard ≤ 4 mm corrugated Die cutting accurracy: ≤ ± 0.1 mm Max diecutting force: 300 T Max diecutting speed: 7500 s/h Max deeder pile hight: 1600 mm Max delivery pile hight: 1400 mm Main motor: 11 KW Overall dimensions: 7700 mm x 4600 mm x 2400 mm Net weight approx: 17 t Full loade wattage: 16,9 kW Available: March 2024 Condition: excelent- like NEW
DMG MORI SEIKI NHX4000 CNC machining center made in 2014 in Germany is an ideal combination of functionality, productivity and precision that can handle even the most complex challenges in a wide range of industries. This technologically advanced machine consists of a single-piece bed with sliding column, reliable components and extensive optional equipment. The machining process takes place inside a large work area, which includes an extremely powerful high-speed spindle, a 4-axis rotary table and a two-pallet system. This system allows uninterrupted machining of multiple workpieces, thus significantly increasing production efficiency and reducing machine downtime to a minimum. In addition, all basic machine components are cooled to increase their service life. The DMG MORI SEIKI horizontal machining center is equipped with optional equipment, including measuring probes, tooling and ...
Cutter / Cutting Mixer / Bowl Cutter Manufacturer: DMS (Dillmann Maschinensysteme Saarbrücken) Type: DMK 80 V2 Equipment: Bowl: stainless steel, 80 liters capacity, designed for approx. 65 kg roast Blade speed infinitely variable from 1000 - 3600 rpm Mixing gear backwards, infinitely variable from 100 - 300 rpm 2 bowl speeds 8/16 rpm electric knife shaft brake Automatic switch-off when opening the lid Thermometer digital Noise protection cover Integrated switch box 6er knife head additional 2x 6 knife set including 4 wrenches original instruction manual Storage machine, immediately available! Specifications: 400V / 50/60 Hz / 21+0.9 kW / 43 + 2.8 A / 64 A CEE plug Total dimensions with the lid closed: H115 x W135 x D120 cm Year of construction: 2018 Weight: approx. 1040 kg Function ...
Product number: 2232 Type: DMK80C Year of construction: 2014 Bowl: 80 litres Capacity: max 64 kg Knifes: 2 speeds, 1500 / 3000 RPM Bowl: 2 speeds, 8 / 16 RPM Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 1300 x 1200 mm Weight: 1030 kg With temperature indicator
Very well maintained 80 liter machine, with 2 x knife shaft speed + 2 x bowl speed
Dolouets 2 GSV 53 press for foam cutting The use of the presses is intended for foam cutting. (cushioning foam, soundproofing or other for automotive, aeronautics, etc.) The last pieces cut are the one in pj. At the documentation level, we have electrical diagrams and a few mechanical plans.
Automatic program Safety guard 1 standard L knife length 320 mm Finger cut equipment :3 tools diam. 18, 20, 24 mm Machine checked and cleaned.
Towed chopper TP 760 P, wood chopper with feeder approx. 160x260 mm, combination with Reiser SCH 230 container tipper. Container loading capacity 3.5 m3, high emptying to approx. 224 cm, additional loading flap in the rear. Tyres 10.0x75-15", parking brake, Total weight 2,800 kg. Machine in non-operational condition. More bush hackers and wood chippers in stock!
Duker Rex RK 45, 45 liters bowl cutter with brand new noise reduction cover, 2 knife speeds, mixing 2 speeds, 2 separate bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.