used Mandrel Pipe Bending Machines for sale

tube diameter: 60 mmwall strength: 3 mmbending radius min.: 2 x Rohr-Ø ÷ R200 mmbending angle: 0 - 180 °gas tube pipelines: 2 (60.,3mm) mmspeed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kWweight of the machine ca.: 0,7 t- Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length)- Electromechanical drive of the bending axis- hydraulic clamping- mandrel feed / extract- 30 programs x 9 bending angle + correction angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kottmann & Berger Type: BVA 3 Year of construction: 2001 Rated power: 5 kW Pressure: max. 6 bar Bending diameter (steel): 32 mm Bending radius: 1.5 x D – 2.5 x D Machine weight: 0,7 t

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

tube diameter max.: 38 mmwall strength: 2 mmbar material dia. min.: 10 mmbending radius min.: 35 mmbending radius max.: 150 mmpull up length of tube: 4500 mmbending angle max.: 180 °accuracy of bending angle: ± 0,2 °total power requirement: 7,5 kWweight of the machine ca.: 1,2 t- with 8-pos. bending angle pre-selection- crawler gear control- positioning device by hand- tube twist deviceFollowing bending tools are with the machine:- ø 10 mm, radius 27,5 mm- ø 12 mm, radius 35 mm- ø 12 mm, radius 56 mm- ø 15 mm, radius 35 mm- ø 15 mm, radius 57,5 mm- ø 18 mm, radius 35 mm- ø 18 mm, radius 59 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

- Working range pipe Ø 4 - 28 mm x 3 mm for steel - Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals - Pipe sliding length 3,000 mm - Electronic single-axis control / angle input - Bending radius max. 90 mm - Minimum quantities - Mandrel lubrication - incl. existing tools ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) - Weight approx. 600 kg - L x W x H approx. 3,800 x 600 x 1,100 mm - Incl. operating instructions and spare parts list

tube diameter: 6 - 28 mmwall strength: 2 mmbending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mmbending angle max.: 190 °arbor length: 3000 mmoperating pressure: 180 barhydraulic motor: 4 kWweight of the machine ca.: 900 kgdimensions of the machine ca.: 3,8 x 1,1 x 1,3 mCondition: ready for operation: Electric 400 Volt: Bending segments: diverse ZollBending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 mDouble Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut.Mandrel lubrication, adjustable length stops.Operating modes: manual and semi-automatic.Control buttons: hydraulics on / off,  ...

Manufacturer: Tubobend Type: 80 S 108 V Year of construction: 2000 Range: max. Ø 76.1 mm

tube diameter: 51 mmwall strength: 3 mmsemi-automatic operated: UZMA bending radius max.: 225 mmbending angle max.: 190 °bending speed: 35 ° / sec.mandrel length: 3.100 mmengine output: 5,5 kWvoltage: 380 Vtotal power requirement: 11,0 kWweight of the machine ca.: 1,36 tdimensions of the machine ca.: 4,20 x 1,60 x 1,20 m- Serial No.: 0144- semi-automatic mandrel bending machine- bending angle is program controlled- length + twisting angle manually adjustable- digital display for twisting angle, length and bending angle- the following bending sets are included: 1.) R75 mm / Ø 20 mm 2.) R60 mm / Ø 25 mm 3.) R75 mm / Ø 30 mm 4.) R75 mm / Ø 40 mm 5.) R170 mm / Ø 50 mm 6.) R35 / flat Material 40 x 10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.