used Notching Machines for sale

Inv. Num. : 6485 Type: Q28B-4X200 Producer: ACL Created: 2006 Parameters: Maximum sheet thickness: 4-6 mm Power consumption: 4 kW notch: 250 x 250 mm Machine weight: 1350 kg Equipment: Adjustable angle

Machine Type: Pipe Notching Machine Manufacturer: ALMI Condition: very good Offer Type: Used Machine Specifications: Power: 5 sizes Ø 28 – 61 mm Drive type: el./mech. Propulsion: 2.2 kW Remark: Substructure Weight: 100 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

plate thickness: 1,50 mmblade length: 150 x 150 mmtable:: 457 x 305 mmcutting angle: 90 °adjustment of stroke: 20,0 mmweight: 73,0 kgrange L-W-H: 460 x 630 x 1150 mm- Notching with a burr-free cut, without deformation of the cut edges- For punching out corners, shapes, etc. up to a maximum of 150 x 150 mm- Body made of high-quality gray cast iron for precise work- Blades made of surface-hardened tool steelFurnishing:- manual notching machine- 2x material stops- Scales support tables- hand leverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet thickness: 4 mm steel, 3 mm stainless steel Adjustable angle between 30 and 120 degrees Weight: 1.000 kg

offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg

Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- 2x staking stops with movable and interchangeable stop bars- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left anddirectly connected to a right lower knife- once for each notch over 30°left and once on the right.- the swivel adjustment becomes pneumatic, immediatelyafter completion  ...

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mm Machine like NEW () Furnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left anddirectly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightni ...

: 4,0 mm: 3,0 mm: 30 - 120 Gradblade length: 150 x 150 mmwork height max.: 900 mmtable:: 1000 x 650 mmengine output: 3,0 kWweight: 850 kgrange L-W-H: 1250 x 1000 x 1160 mmFurnishing:- Notching machine with angle adjustment 30° - 120°- Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- adjustable lift height adjustment- 2x staking stops with movable and interchangeable stop bars- Waste bin- free-moving footswitch- Operation manualBOSCHERT angle adjustment:- the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife- once for each notch over 30° left and once on the right.- the swivel adjustment becomes pneumatic, immediately a ...

- Cutting length: 220 mm - Capacity: 4 mm - Cutting angle: 90 ° - Required power : 2.2 kW - Operating voltage: 400 V - dimensions WxHxD: approx. 850 x 1100 x 1100 mm - Weight: approx. 600 kg

Capacity: 225 x 225 x 4 mm steel Table dimensions: 1000 x 800 mm Motor power: 4 kW Country of origin: Italy Machine LxWxH: 1100 x 820 x 1050 mm Machine weight: 700 kg

Engine. Notching machine with adjustable angle (used) Manufacturer: COMACA Type Junior T 10 Knife length 210 mm x 210 mm Cutting capacity mild steel 4 mm Cutting capacity stainless steel 3 mm Strokes per minute 45 Table size 1280 x 650 mm Variable angle cutting device VARCUT 200 Cutting angle range from 30 degrees to 150 degrees Drive power 2.9 kW Weight approx. 450 kg Space requirements L 1280 m W 930 mm H 1500 mm 2 angle stops Foot switch Load capacity 10 tons Operating instructions The machine is in first-class condition and ready for immediate use. Forklifts available, freely loaded trucks Cheap shipping possible Location of the machine 48324 Sendenhorst for enquiries 0157-35496006 The price is net plus 19% VAT.

plate thickness: 6,0 mmpressure: 18 tcutting angle - upper blade: 90 °blade length: 225 x 225 mmvoltage: 380 Vtotal power requirement: 5,5 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1,10 x 0,80 x 1,05 m- Angular stops adjustableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

maximum cutting length: 225 mm thickness: 3 mm Electr. Supply: 380 V, 1.5 kW weight: 800 kg space requirement: 1080 x 820 x 1050 mm

plate thickness: 6,0 mm STplate thickness: 4,0 mm VAtable-size: 1200 x 900 mmblade length: 250 x 250 mmstrokes per minute: 45 minadjustable: Winkel 30°-135° mmwork height max.: 1050 mmengine output: 4,0 kWweight of the machine ca.: 1.300 kgrange L-W-H: 1200 x 1350 x 1600 mmFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- 2x speeds- Inching mode for adjusting the shear blades- 2x adjustable stop rulers- Machined work table, with T-slots- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Nominal force: 90kN Maximum pressure: 280Bar Installed power 4kW Maximum cutting thickness 6 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 1,050 x 1,350 mm, weight approx.: 850 kg

plate thickness: 4 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 800 mmtotal power requirement: kWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,9 x 1,1 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: siehe TD mmpressure: siehe TD ttotal power requirement: 4 kWweight of the machine ca.: 0,950 tdimensions of the machine ca.: 900 x 1050 x 1300mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros Special price on requestFurnishing:- electro-hydraulic notching machine- Multi-functional machine with 2x workstations 1x notching, 1x bending station including bending tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x angle stop, adjustable- automatic cutting gap adjustment- freely movable foot switch- Connection cable + 16A plug- Cutting performance: 6.0 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9397094The data for this ad was cr ...

plate thickness: 4 mmblade length: 200 mmangle adjustable from - to: jede Seite 15 - 60 Gradtable surface area: 1000 x 780 mmtotal power requirement: 5,0 kWweight of the machine ca.: 0,9 tdimensions: 1,6 x 1,1 x 1,75 mHydraulic notching machine- Footswitch- 2 pcs. sheet metal stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,0 mmtube diameter: 60,0 mmmotor: 400 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4,0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397088The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 1200 x 780 mmblade length: 200 x 200 mmstrokes per minute: ca. 60 minangle adjustable from - to: 15 - 150 Gradengine output: 4,0 kWweight of the machine ca.: 1200 kgdimensions of the machine ca.: 1700 x 1000 x 1500 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 mm: - t: 4 kW: 250 mm: 90 °: 35 Hub/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Cutting length up to approx. 220 mm - Cutting thickness - Steel with 400 N/mm² strength 4 mm - Stainless steel with 600 N/mm² strength 3 mm - Cutting angle 90 ° - Stroke rate up to approx. 35 1/min. - Depth stops left + right - Table support surface 600 x 400 mm - Table height approx. 1000 mm - E – Foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 800 x H 1200 x D 650 mm - Weight approx. 500 kg

plate thickness: 4,0 mmthickness at Niro-steel: 3,0 mmblade length: 200 mmangle adjustable from - to: 30 - 120 Gradno. of strokes: 60 Hub/minoil volume: 60 ltr.table:: 1000 x 800 mmtotal power requirement: 2,62 kWweight: 800 kgrange L-W-H: 1000 x 1500 x 1440 mmFurnishing:- robust hydraulic notching machine, with adjustable angle- Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels- hydraulic clamping and locking- Infinitely adjustable cutting depth, with digital display- 2x locking accuracy stop, with stop bars- Stripper for sheet metal cutting- Collecting container for clippings- Freely movable foot pedal for triggering the strokeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness 4.0 mm Sheet thickness for stainless steel 3.0 mm Knife length 200mm Angle infinitely adjustable 30-135 degrees Stroke rate 60 strokes/min Oil capacity 60 ltr. Table: 1000 x 800 mm Motor: 4kW Weight 970 kg Dimensions L - W - H 1000 x 1660 x 1473mm Accessories Spare Knives

plate thickness: 6 mmblade length: 200 mmangle adjustable from - to: 30 - 135 Gradtable surface area: 780 x 1000 mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,1 tdimensions: 1,4 x 0,8 x 1,3 mHydraulic notching machine- Footswitch- digital angle display- Machine lights- Accessories see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. cutting length: 200 mm Sheet thickness: 4 mm Cutting angle adjustment: 30 - 135° Stroke rate: 60 rpm electr. Connection: 400 V, 4 kW Weight:957 kg Dimensions: 1600 x 1000 x 1500 mm

offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg

Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

plate thickness: 8,0 mm STplate thickness: 5,0 mm VAtable-size: 1000 x 950 mmblade length: 200 x 200 mmstrokes per minute: 60 H/minadjustable: Winkel 30°-140° mmwork height max.: ca. 950 mmoil volume: 60 lengine output: 4,0 kWweight of the machine ca.: 1200 kgrange L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 eurosFurnishing:- Robust electro-hydraulic notching machine- with adjustable angle, electro-hydraulic adjustment- Adjustment by hand wheels (left + right knife segment)- hardened knives also for cutting stainless steel- front panel- electro-hydraulic knife clamping- Inching mode for setting the shear blades selectable (manual mode)- planed table surface, with T-slots to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- 2x blank holders- 1x free moving footswitch- front scrap switch  ...

plate thickness: 4 mmblade length: 200 mmtable surface area: 1000 x 780 mmangle adjustable from - to: 30 - 140 Gradwork height max.: 910 mmthickness at Niro-steel: 3 mmtotal power requirement: 4 kWweight of the machine ca.: 970 kgdimensions of the machine ca.: 1 x 1,66 x 1,47 mElectric 380 Volt: Foot switch: Squaring arm: 2 Stck.Hydraulic notching machine with adjustable angle from 30° to 140°, aut.cutting gap adjustment, hydr. clamping of the knives. As a rare special accessory, the machine has a lifting height and cutting length adjustmentDigital display. The height adjustment works, but in the cutting length range it always cuts the full length of 200 mm. Since the length reduction option is almost never ordered when purchasing these machines, except for a specific special application, we did not have the electronic device repaired. You can see the function of the machine in the v ...

Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

Unclinking machine, little used Notching machine , lessly used Type: VA 200/ 4 Built / yom: 1995 Manufacturer / make: KEMPFLE Table size: 1000 x 800 mm Power:/ capacity: 4 mm / for steel / steel 400 Nm/mm 3 mm for stainless steel 600Nm/mm Length of cutter blades: 205 mm Number of Strokes/ strokes: 60 per minute Cutting head/ cutter head: 30...135° (stepless) Weight / weight: 1.15 tons Connection value/ connected power: 4 kW

plate thickness: 6 mmpressure: 12 tcutting range: Breite x Länge 200 mmno. of strokes: 15 Hub/mincutting angle: 30 - 140 °total power requirement: 4 kWweight of the machine ca.: 1,02 tdimensions of the machine ca.: 1065 x 900 x 1210 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 41.9 x 2.7 R21 x 8 mm Featured with - Foot pedal - Operating Instructions (NL) Pneumatic machine

Description: Round steel 30 mm Square steel 120 x 8 mm Angle steel 30 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 1,500 x 1,800 mm, weight approx.: 400 kg

Description: Round steel 30 mm Square steel 150 x 8 mm Angle steel 90x8 / 50x6 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,800 mm, weight approx.: 400 kg

An Eckenabrunder (corner punch) is designed to provide orthogonal edges with a RADIUS. With various stamping and punching tools, materials such as paper, cardboard, aluminum-composite, aluminum can be processed up to 2 mm (E.g. signs) and non-ferrous metals. Corners cut round NPR 45 incl. 1 piece knife R 4 or R 8.

Manual cut-out shears of excellent quality, for the burr-free cutting of sheet metal up to 1.5 mm sheet thickness steel sheet/ST40 – aluminium 2 mm, backdrop-guided knife beam, shear length 150 x 150 mm, clink angle 90°, dimensions 460 x 500 x 810 mm, weight 75 kg

Description: Flat steel scissors: Knife length: 220 mm Sheets up to: 11 mm Flat steel up to: 120 x 13 mm Profile steel scissors: Angle iron up to: 80 x 8 mm T-iron up to: 80 x 8 mm U and I steel up to: 120 mm Number of strokes: approx. 55 / min. Steel bar shears: Round steel up to: 32 mm Square steel up to: 30 mm Notcher: Sheets up to: 10 mm Latch width up to: 40 mm Latch depth up to: 80 mm Hole punch: Punching capacity: approx. 35 t = 25 Ø x 11 mm / 20 Ø x 13 mmApprox. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,800 mm, weight approx.: 900 kg

Notching unit RASKIN 125 x 125 x 3 mm Shipping within Germany possible !

plate thickness: 3 mmblade length: 250 mmangle adjustable from - to: fest 90 Gradtable surface area: 900 x 790 mmtotal power requirement: kWweight of the machine ca.: 0,7 tdimensions: 1,2 x 0,9 x 1,2 mnotching machine- foot switch- Emergency stop switch- variable release angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combined punching machine, hydraulic Hydraulic Ironworkers 4 kW 900 kg

pressure: - tpunching cross-cut in cmm: - stroke: 20 mmplate thickness: 4 mmblade length: 205 mmtable-size: 700 x 825 mmcutting capacity stainless steel: 3 mmthroat: 300 mmstrokes: 50 p. min.oil tank: 35 ltotal power requirement: 3 kWweight of the machine ca.: 720 tdimensions of the machine ca.: 0,7 x 0,83 x 1,1 mElectric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic punching/nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD.The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e.the knives cut from front to back. This means the sheet metal cannot bendmove forward. The automatic cutting gap adjustment (patented) worksover the lower blades (therefore no tipping of the cutt ...

plate thickness: 4 mmblade length: 205 mmtable-size: 700 x 825 mmcutting capacity stainless steel: 3 mmthroat: 300 mmstrokes: 50 p. min.oil tank: 35 ltotal power requirement: 3 kWweight of the machine ca.: 720 kgdimensions of the machine ca.: 0,7 x 0,83 x 1,1 mElectric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic asuklink machine, more automaticCutting gap regulation and HOLE PUNCHING HEAD.The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e.the knives cut from front to back. This means the sheet metal cannot bendmove forward. The automatic cutting gap adjustment (patented) worksover the lower blades (therefore no tipping of the cutting head and abrasion ofthe knife tips) and burr-free cuts are  ...

SIMASV AUSKLINKEN MACHINE TYPE AF226/B -Capaciteit 220 x 220 x 6 mm -Hydraulic -Afmeting table 650 x 650 mm -Voetbediening -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Sell a very stable cut-out machine. Two-sided operation 1 Unplug ingesling of corners us. Knife length 100mm per knife 2 Clinking / punching holes, square Foot-operated Dimensions Table770mm1040mm Space requirement 1100mm1000mm1300mm high Accessories Stops

Description: Technical details: max. cutting capacity of mild steel 40 mm, max. cutting capacity of stainless steel 3 mm, infinitely variable angle adjustment from - to 30 - 120 degrees, knife length 150x150 mm, working height 900 mm, work table: 600x450 mm, additional information: pneumatic notching machine, sheet thickness 4 mm, sheet thickness with stainless steel 3 mm, cutting length 150 x 150 mm, working stroke max. 22 mm, table height 900 mmApprox. Onsite Dimension. (l x w x h): 800 x 910 x 800 mm, weight approx.: 400 kg