used Pumps for sale

Vacuum pump Becker KVT 3.100 good condition, tested, fully functional 400V/ 3kW 50Hz, 100m³/hour, maximum -900 mbar a matching filter cup and check valve can be installed at an additional cost

Becker KVT Series vacuum pumps are medium vacuum, dry displacement pumps and are designed to operate on a continuous duty basis at any vacuum level from open flow to 27 inches Hg. The KVT Series dry rotary vane pumps utilize self-lubricating, graphite composite vanes, specifically engineered for Becker pumps. No oil to change and only minimal maintenance is required. Inlet capacity: 98/112m3/h Max. vacuum: 100/100mbar

Becker pumps, model U 4.165 SA/K, SN: H26B2941. Good condition. Frequency: 50760 Hz Speed: 1440/1720 min Power required: 3,05/3,8 Inlet capacity 162/190 m3/h max. vacuum 3/3 mbar Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the  ...

Diaphragm pump made of Aluminum manufactured by Blagdon model 1A-AA-BB-TTS

Diaphragm pump made of Aluminum manufactured by Blagdon model 1B-AA-BB-EEA

Diaphragm pump made of carbon steel manufactured by Blagdon model 2B-SA-BB-TTS

Diaphragm pump made of carbon steel manufactured by Blagdon model 2B-SA-BB-TTS

Diaphragm pump made of carbon steel manufactured by Blagdon model 2B-SA-BB-TTS

Diaphragm pump made of carbon steel manufactured by Blagdon model 2B-SA-BB-TTS

Diaphragm pump made of carbon steel manufactured by Blagdon model 2B-SA-BB-TTS

USED BLAGDON AIR-OPERATED DOUBLE DIAPHRAGM PUMP

Diaphragm pump made of carbon steel manufactured by Blagdon

Bondora K08 MS MOR Side Channel Compressor Bondora K08 MS MOR Side Channel Compressors 4 kW 50 Hz 2910 rpm 4.8 kW 60 Hz 3480 rpm More side channel compressors new and used - you can find them in our shop! International shipping costs on request!

Centrifugal pump Manufacturer: BP Lubrication Smering Item #: X064200/64/VE Power: 7.5 kW Speed: 2880 rpm LWH: 700 x 350 x 450 mm

Centrifugal pump Manufacturer: BP Lubrication Smering No.: 0405970/02/VC Power: 4.0 kW very good condition with cover Speed: 2800 rpm LWH: 700 x 400 x 400 mm

Hose pump Manufacturer: Bredel Hose Pumps Type: SP/15 No.: 14845 Power: 0.37 kW in EEx protection speed-controlled very good condition LWH: 750 x 450 x 350 mm

Brinkmann SAL2500/840+001 Submersible Slurping Pump Manufacturer. Brinkmann Type: SAL2500/840+001 2200 l/min Power: 18.5 kW Voltage: 400 V Speed: 2955 1/min Depth: 840 Weight: 228 kg More submersible pumps new and used - you can find them in our shop! International shipping costs on request!

Brinkmann TH1121A760+001 Submersible Pump 9 kW Manufacturer: Brinkmann Type: TH1121A760+001 Type: Submersible Pump Power: 9 kW 2955 l/min 400 V More submersible pumps new and used - you can find them in our shop! International shipping costs on request!

Busch MINK MM 1322 AV pump, good working condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

USED PANDA WV 1000 C 0EC ZZTZ BUSCH VACUUM PUMP

Rotary vane vacuum pump manufactured by BUSCH. With a Busch VM oil type of 1 liter. The sound pressure level is 63 dB (A) and the maximum tolerance steamed is 40 mbar. With a water vapor capacity of 1.1 kg per hour.

Vacuum pump Manufacturer: Busch Type: RC 0025 E 501 Item #: 02006242 Pressure: 20 mbar Power: 0.75 kW LBH: 560 x 310 x 420 mm

Vacuum pump Manufacturer: Busch Type: SV 1040 C 000 10XX Item #: 00445000075 Final pressure: 120 mbar Power: 1.25 kW

Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar

food piston pump, Ex version: Costruzione Macchine Enologiche model: 1760 GL year: 1997 9 kW Ex

Centrifugal pump Manufacturer: CREPACO Type: R3R No.: 0-2182 speed-controlled Mobile with housing good condition Gearbox: Stöber LWH: 1050 x 500 x 480 mm

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

New (second hand) pumps Centrifugal pump Ebara 2CDX_120-40 (photo 1): -400v -3 phase -3 kw -2900 rpm -Suction 1 1/4" PUMP TECHNICAL DATA • Maximum working pressure: 8 bar • Maximum temperature of the liquid: -5°C ÷ +60°C for standard and E version -5°C ÷ +110° for H-HS-HW-HSW version • G1½ suction connection for 2CDX 200, G1¼; for the rest of the range • G1 discharge connection 3SHS 50-125/3.0 centrifugal pumps close coupled (photo 2)

New Ebara pump for sale: Ebara, pump 3LS 80-160/15

New pump from Ebara: Ebara, pump 3SHS 50-160/5,5Kw The EBARA centrifugal pumps series 3SHS are high-quality stainless steel pumps with stub shaft and standard motor for commercial and industrial applications.

New (second hand) pump Ebara CRN 1-2: Vertical, multistage centrifugal pump with suction and discharge ports on the same level (in-line) enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy service and access. Power transmission is via a split coupling. Suitable for many industrial and commercial applications (water pressure boosting, industrial water supply & transfer, machining, and etc.)

Dosing pumps Elados EMP 12500P06 (2 stub) Elados EMP 13300P035 (1 piece) Elados EMP 14000P035 (1 piece)

various dosing pumps new & used

Pump, water pump Brand: Emile Egger Type: T 41-50 Year of construction: 2007 Power: 7.5 kW 3.3 L/s 25.5m Speed: 2855 rpm All information without guarantee

System: piston diaphragm pump Manufacturer: Emmerich Type: SP521 2075 Machine number: 0275 Year of construction: 1977 Performance: 5m 3 with 16 bar Pressure: 16 bar Engine: BBC, 14.9 kW, 50 Hz Inlet connection: DN 50 Durckseite connection: DN 50 Dimensions: approx. 1600 mm L

Head 4m, 63l/min,

Feluwa - Pump Condition: functional We can also offer general renovation on request. Spare parts are still available. If you have any questions, please contact us.

Attachment: submersible pump Manufacturer: Flygt Prod.-No.: 3085.891 IP: 68 KW: 2.4 Rpm: 2840 Hz.: 50

Type: diving motor unit Flygt submersible pump Pump: 3085891 Data: 259 mm / M15-09-2AL Y/A: 2,4 kW r/min: 2840 V: 4.7 / 8.1 kg: 55

Centrifugal pump Manufacturer: Fristam Type: ET232 N°: 55059 Power: 11 kW Speed: 2910 rpm

Centrifugal pump Manufacturer: Fristam Type: FP7028 Item #: 02130032 Power: 0.25 kW LBH: 450 x 180 x 300

Centrifugal pump Manufacturer: Fristam Type: FP712C Item #: 414433417 Power: 1.1 kW Speed: 2880 rpm LBH: 530 x 270 x 430 mm

Type: FP722KF No.: 42441029 with perm for mechanical seal Engine: Flender ATB Loher in F n = 2840 RPM Power: 1.5 kW Dimensions: LWH = 500x200x230mm Weight: approx. 40 kg

Fristam FPE1232/185A 30 kW pump capacity: 50.000 - 200.000 l/h The specific profile of their impellers provide for a steady, smooth flow with minimal secondary swirl even at high flow rates. Universal use, gentle product handling, robust, easy to maintain, durable, economical. The Fristam FP’s well-thought-out design provides you with the optimal solution to your specific requirements. Fristam pumps FP are designed with open impellers, with narrow gaps between the impellers and the cover. Combined with the flow-optimised pumping channel, these ensure minimal secondary flow, very gentle product handling even at high volumetric flows, and energy-saving operation. The FPs’ design makes them ideal for hygienic applications. The pumped medium may be homogenous, or contain air, gases or suspended solids.

Type: FPE 3402B No.: 0406470037 EX II 2 GC T4 Motor 1,1 kW Year of construction: 2004 ATB 2860 RPM Dimensions: LWH = 450x200x250mm Weight: approx. 25 kg

Make: Fristam Type: FPE3402C No.: 406641008 Ex-protection Engine: ATB Flender Power: 1.1 kW at 2860 RPM

Type: FPE722C No.: 42439351 Engine: MT motor Performance: approx. 1.5 kW, 2970 RPM Dimensions: LWH = 500x200x230mm Weight: approx. 40 kg Milk bolting DN 40

Type: FPE722C No.: 0424470326 Engine: ATB in Exx Power: kW 3,3 Year of construction: 2004 n = 2830 RPM Dimensions: LWH = 600 x 300 x 330 mm Weight: approx. 60 kg Frontal connection DN 50, up DN 36 Milk tube

Excenter screw pump Manufacturer: Fryma Power: 0.55 kW Built: 1990 speed-controlled LWH: 1100 x 300 x 300 mm

Excenter screw pump Manufacturer: Fryma Type: NE20A Built: 1987 Power: 0.55 kW good condition LWH: 1100 x 300 x 270 mm