used Stenter frames for sale

CIRCULAR SAW Mod ALTENDORF F45 machine suitable for cutting plastics and solid wood CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3400 max. blade mm.500 blade group inclinable at 45° max. cutting height with 90° blade = mm.175 max. cutting height with blade at 45° = mm.123 saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1100 Volt. 380/50 Year 2003

AMADA HFE M2 1303 press brake (2015) Capacity: 1300 kN Beam length: 3140 mm Beam width: 90 mm Distance between frames: 2700 mm. Throat depth: 420 mm. Open height: 470 mm. Stroke: 200 mm. Working height: 960 mm. Oil capacity: 100 l. Power consumption: 12.5 kW Approach speed: 100 mm/s Retum speed: 100 mm/s Maximum bending speed: 10 mm/s Dimensions: Length: 4535 mm x Width: 2620 x Height: 2805. Weight: 8150 kg.

Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

With chases and frames 92 x 126 cm In a good condition Can be seen in our warehouse in Istanbul Immediately Available

2006 Bos Machine (BMH) with a Sapiens Bos Machine (BMH) with a Sapiens Bos Machine (BMH) with a Sapiens Wood We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Boss Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling mot ...

Bos Machine (BMH) with a Sapiens Wood bosmachines We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: ...

CUT OFF SAW machine model BOTTENE TE 500 second hand machine motorized infeed roller conveyor machine in very good working conditions machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various diam. blade mm. 500 engine power 7.5 Hp max. cutting size mm. 500 x 135(H) input motorized roller conveyor length mm.3000 outgoing roller conveyor length mm.3700 volt. 380/50 overall dimensions of the assembled machine: 6700 x 1200 mm overall dimensions for transport: 4000 x 1350 mm weight kg.1300

Plansichter Buhler model Mpad 6.14, 6 working channels with 14 frames each, drive shaft with motor

250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!

Carter 3D Banbury Mixer Bullwheel Standard drive Rotors hard chrome Bearing type spherical roller End frames hard chrome finish Drilled type jackets F type dust seals Drop door discharge McCord lubrication Complete with Mather & Plait motor and panel

Code: 0261 Brand: CEMIL - ITALY Model: T 140 M - CE Standard Automatic cutting machine for wooden boards, packaging, window frames, wooden rods and various - CE Standard Technical data: Cutting capacity mm 500 x 140 Blade diameter mm 450 F30 Motor power Hp 7,5 Blade speed/min 3200 Infeed roller conveyor mm 1650 Outfeed roller conveyor mm 1250 Strong workpiece support stop Diameter of 2 suction ports mm 140 Compressed air 7 bar Overall dimensions of assembled machine mm 3500 x 1950 x 1600 h Weight kg 480

Code: 0108 Brand: CENTAURO Model: T3-130 Hydraulic copying lathe for wood, stairs, frames, chairs, tables, etc. Automatic cycle turning system with one copier programmable to perform one or two passes Hydraulic copying unit with touch probe Max distance between centres mm 1300 Height of centres on pallet mm 226 Max diameter mm 250 Tailstock sleeve diameter mm 60 Tailstock sleeve stroke mm 100 Carriage feed speed mt/min 0/6 Carriage return speed mt/min 7,33 Spindle rotation speed rpm 900/1500/1800/2250/3000/4500 Spindle motor power Hp 5 Installed power Kw 4,8 Overall dimensions mm 3520 x 1190 x 1680 h Weight kg 1000

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D ob ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce  ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Conside ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produ ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new co ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis and the prov ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D  ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Consideri ...

120 ton x 4100mm (3700mm between frames) MODEVA 10 CNC Complete with STARMATIC ROBOT AUTOMATION TOOLING PACKAGE SOFETWARE PACKAGE

Electronic tenoning machine for door and window frames COLOMBO AT 35 second hand machine CE Standard : Yes machine composed by 2 working units : 1 End-cutting circular saw : Blade diameter mm 400 Motor power Hp 4 Horizontal movement of the blade mm 130 Max. height of cut mm. 125 Tenoning spindle : Automatic tenoning carriage: Stroke mm 1700 Worktable dimensions mm 600 x 1100 Spindle diameter mm 50 Spindle length mm. 620 Vertical stroke mm. 540 Max tool diameter mm 320 Motor power Hp 10 Weight kg 1800 volt. 380/50

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

250 Ton x 5100mm Over Bed CNC Press Brake. Admitting 4500mm Between Side Frames. 3000mm Long Heavy Duty Back Gauge. Including Cybelec DNC 800 8 axis control. (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing. Infra-Red Operator Guards. Hydraulic Top Tool Clamping. Side & Rear Safety Fences. Tooling Carousel. S/No 97P288. New 1997

Max. bending length 3000 mm Max. pressure 160 Ton Distance between side frames 2550 mm Length of stroke 200 mm Control DELEM DA 24 e Equipped with: Motorized back gauge Upper dies Bottom dies Segments Foot contact 2-hand operated Service tools etc.

Stock# U2408-6 Used stainless steel filter press by Filtrox Novox (CH) type Novox 40/40 (plate & frame). Press has 20 stainless steel plates with dimensions 400 mm x 400 mm and 20 stainless steel frames with internal dimensions 380 mm x 380 mm x 28 mm. Working filtration surface 6,4 m2 and working cake volume 80,8 l. Filter press is mounted on stainless steel mobile frame. Manual closing.

Code: 0242 Brand: GABBIANI Model: MODUL/80 Automatic double end tenoner for furniture, doors, kitchens, cabinets, window frames, panels, prefabricated houses, raised floors, composite materials, and various Max working width mm 3200 Min working width mm 150 Max working height mm 180 Operating units: 1° Upper blade unit - Motor Hp 3,2 - Rpm 2900 - Suction mouth diameter mm 120 2° Lower blade unit - Motor Hp 4,5 - Rpm 2850/5700 - Suction mouth diameter mm 120 3° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 4° Automatic spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 5° Spindle moulder unit - Motor Hp 5,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 6° Spindle moulder unit - Motor Hp 7,5 - Rpm 2900/5900 - Suction mouth diameter mm 150 Feed speed variator Automatic shoulder opening with dis ...

DIE CUTTER HEIDELBERG GT -Max paper size 32x46 cms. -Complete with ink unit and rollers -Two frames, plates and accessories -In production, available immediately

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design 4-color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift table - shaker Offset printing machine Manufacturer: H ...

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design Price: on request 4 color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Price: on request Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual Price: on request cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift tab ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end produc ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the roll ...

We sell 1 x 3584-HA1 3 x 3584-S24 4 x 3584-D23 1 x 3584-L23 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions from al ...

• Size of the vacuum plate = 90 x 134cm • Useful printing size= 70 x 100cm ( according manufactures instruction book ) • Outside frame size max: 94.5 x 145cm • The frame which are coming with the machine / aluminum frames, useful printing size= 84 x 132cm • In the attachment the complete instruction book from La Meccanica We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Screen printing machine PANT 70-100 manufacture LA Meccanica Italy year 03/2006 S/N 114 Printing size max: 70 x 100cm Vacuum Plane: Anodized Aluminum with a squeegee guide bar for the printing color counter weight to hold the frame with the screen easily 380V/50T, 0.37kW vacuum motor  ...

Code: 0244 Brand: MARTIN Model: T74 AUTOMATIC - CE Standard Controlled axis panel saw with scoring unit for furniture, fwindow frames , kitchens, window frames, doors, panels, composite materials and various - CE Standard - Year 2007 Technical data: Carriage length mm 3300 Working table height mm 900 Blade diameter mm 500 Max cutting height mm 170 Blade inclination 0-46° Parallel guide cutting width mm 1600 Quick change blade system PRO LOCK Motor Kw 5,5 Scoring unit with 3 controlled axes - Motor Hp 1 - Rpm 11500 - Blade diameter mm 120 F 22 - Cutting height mm 4,5 - Cutting width min/max mm 3/4,8 Parallelogram transversal table for angular cuts - 46,5 / + 46,5° with display Blade lifting/blade tilting/parallelogram guide programming Power PC control User interface: Touch screen 10,4" Main blade lubrication device N° 2 suction ports: diameter 120 mm - diamet ...

Bos Machine (BMH) with a Sapiens Wood We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: The machine is  ...

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

- cylinder diecutting machine - size 46 x 58 cm - spare frames

3 rows of pallet racks, 3.5 m high, each 9 fields (2700), each 2 truss levels - 30 frames / 120 trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 3.50 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks We answer questions preferably by email. Or let us know your phone number – we will be happy to call you back at the desired time You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

3 rows of pallet racks, 6 m high, 3 fields each (3600 !), 3 truss levels each - 12 frames / 54 single trusses 3.6 m long - Truss length 3.60 m - Load per level 3 tons - Shelf height: 6 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 550 euros. Delivery time up to approx. 3 weeks You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

4 rows of pallet racks, 6 m high, each 3 fields (3600 !), each 3 truss levels - 16 frames / 72 single trusses 3.6 m long - Truss length 3.60 m - Load per level 3 tons - Shelf height: 6 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 550 euros. Delivery time up to approx. 3 weeks You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

6 x pallet rack rows with 3 fields each (2700), 3.5 m high, with 2 truss levels each - 24 frames / 72 trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 3.50 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

4 rows of pallet racks, 4.5 m high, 3 fields each (2700), 3 truss levels each - 16 frames / 72 single trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 4.5 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

2 rows of pallet racks, 5 m high, each 9 fields (2700), each 3 truss levels - 20 frames / 108 trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 5.00 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks We answer questions preferably by email. Or let us know your phone number – we will be happy to call you back at the desired time You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

5 x rack rows pallet racks, 5.5 m high, each 3 fields (2700), each 3 truss levels - 20 frames / 90 trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 5.50 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL

2 rows of pallet racks, 3.5 m high, each 9 fields (2700), each 2 truss levels - 20 frames / 72 trusses - Truss length 2.70 m - Load per level 3 tons - Shelf height: 3.50 m depth 1.10 m - not pre-assembled - all small parts ______________________________________________________ Freight costs approx. 450 euros. Delivery time up to approx. 3 weeks We answer questions preferably by email. Or let us know your phone number – we will be happy to call you back at the desired time You can reach us at: Phone: (+49) 08031 20 80 937 TOTAL REGAL