material width: 250 mmmaterial thickness: 2 - 4 mmno. of straightening rolls: 7 run-in height: 1250 mm mmstrip intake tiltable, positiv: 25 °strip intake tiltable, negativ: 30 °total power requirement: 3 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: .DIMECO R 693 J+ sheet metal straightening machine y.o.m 2020! - Number of straightening rollers 17 - Number of pull rollers 2 - Pull rollers diameter 180 mm - Number of support rollers 147 - Largest roller distance 200 mm The machine is equipped with: - Control cabinet with drive outlets for height adjustment on the inlet/outlet side of the straightening cassette as well as for the two main drives connected in parallel - Hydraulic unit for the hydr. Movements of the infeed table and the delivery of the infeed driver - Support rollers firmly installed at the top and bottom - Documentation, digital only! - Additional, unused straightening roll cassettes with 17 straightening rolls and intermediate rolls at the top and bottom. The machine was until lately integrated into a fully automatic punching line, therefore it is necessary to complete the control system. There is alr ...
material width: 3000 mmmaterial thickness: 0 mmno. of straightening rolls: 0 total power requirement: 22 kWweight of the machine ca.: 14,5 tdimensions of the machine ca.: 7,5 x 2,5 x 2,9 mD U N K E SHydraulic Straightening System for Flat material and Section Material With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25Year 1990 ( H 89-1960 )____________________________________________________________Consistin g of:Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke ofPiston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm,Distance to column 620 mm, sensitive Straightening stroke via handlever withturret-stop, Measuring device for accurate straitening via a lightbarHorizontal Straightening Device Model HRW 25, Pressure 25 tons attached on right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd57/10 mm/s, ...
material width: 320 mmmaterial thickness: 8 mmno. of straightening rolls: 9 material cross-cut: 2000 mm²weight of the machine ca.: 4,2 tdimensions of the machine ca.: 2000x2000x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 500 mmmaterial thickness: 0 mmno. of straightening rolls: 9 weight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 2000x1500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: incl. operating instructions New machine!weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 4,150 x 2,400 mm
Description: Voltage 380 V Capacity: 6-30m/min weight approx.: 920 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,530 x 1,700 mm
Inv. Num. : 5652 Type: MD6-RE60.1300 Producer: LC CATTANEO Created: 2014 Parameters: Maximum sheet metal plate width: 1300 mm Maximum sheet thickness (ordinary steel): 0.8-3 mm speed: 60 m/min Height adjustment from the ground: 990-1360 mm
FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 110 mm length min.: 400 mm lenght max.: 1700 mmPRESS FORCES total force (nominal): 40 toSystem consists of:+ WICK handling system, YoM 2012+ ABB IRB 6650S-90/3.9 handling robot, YoM 2012+ MAE M-AH 6 automatic pipe straightening machine, YoM 2012
CONTROLS PLC SIEMENS S7 300 FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 30 mm length min.: 250 mm lenght max.: 700 mmSystem consists of:+ COMPINA A2.19153 handling system, year 2000+ MAE M-AH 6 automatic pipe straightening machine, year 2012+ Bühlmann (system construction), year 2000
CONTROLS PLC SIEMENS S7-1500 FEEDSTOCK TUBE external diameter min.: 27.5 mm external diameter max.: 160 mm wall thickness min.: 1 mm wall thickness max.: 15 mm length min.: 3500 mm lenght max.: 13000 mmTUBE LEVELLING UNIT number of leveller rolls: 6 number of intermediate rolls: 3 main drive power: 110 kW feedstock transport direction: left to right System consisting of:+ various existing and supplemented pipe transport systems+ Tube Straightener Montbard DMS 168, YoM 1989+ Chipless Cutting System Bültmann STA 120 H, YoM 2005+ Saw Ohler KA-630-7877, YoM 1988+ Sample Saw Ohler K-400Modernized:2005 new Bültmann chipless cutting system2018 overhaul of complete electrical system2018 new safty protection systemInlet Feed Drive (top and bottom roller): 2x 7 KW ...
1/ Straightener RSTM-SU-W 60/7/700 NIR Built in 1999, producer. PBK Automation GmbH Vöhringen, DE Direction of work - from left to right Passage width - 720 mm Belt width from 50-700 mm Strip thickness from 0.4-3.0 mm Strip cross-section max. 1750 mm2 Feed roller diameter - 80 mm Straightening and correction roll diameter. 60 mm Feed speed - max. 30 m/ min Feed rollers - 2 Straightening rollers 7 Correction roller - 1 Drive power 3 kW Colour RAL 6011 - lime green - Upper straightening head half can be folded up pneumatically in a V-shape for cleaning purposes - Infeed of the upper feed roller is also pneumatic - Adjustment of the straightening block is done via socket wrench Drive - via three-phase geared motor with frequency converter - Single-axis positioning control incremental CPS 20 Freely programmable CNC positioning control - Simodrive 611 Te ...
Band width - 280 mm Thickness 3 mm Setting rollers suit 5-reel 2, all diameter 60 mm Control actuator, band storage adjustable from 0, 5 s â 15 s video available Dimensions 80 x 60 x 140 cm more info on request
material width: 250 mmmaterial thickness: 2 mmno. of straightening rolls: 19 weight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Typ/ type: WML 23/30/630 Manufacturer / make: Schubert Year of make: 1994 Stocknummer / stock number: 1013 max. sheet width: 630 mm max. sheet thickness: 6 mm min. sheet thickness: 0.3 mm Number of straightening rollers: 23 rollers Straightening roller diameter/diameter ofstraightening rollers: 30 mm Speed of straightening: 10 m / min Min. workpiece length: 50 mm Max roller distance: 20 mm Reading of the machine setting / Reading the machine settings: 0,01 mm Power of main motor: 6 kW Weight of the machine / weight: 4,3 t
material width: 150 mmmaterial thickness: 3 mmno. of straightening rolls: 7 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 300 mmmaterial thickness: 3 mmno. of straightening rolls: 7 weight of the machine ca.: 0,5 tdimensions of the machine ca.: BxTxH mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CHARACTERISTICS STRETCH-STRAIGHTENING force: 500 kN Working length: 13000 mm center height: 250 mm stroke: 1000 mmmax. stretching length: 13'000 mmmax. stretching length: 3'000 mmjaw width: 160 mmjaw opening: 0-100 mmTorque: 600 NmRotation angle: +/- 90 degreesRotation speed standard: 1 rpmRotation speed fine: 0.25 rpmStretching speed: 10.8 mm/secRapid speed in working direction: 106 mm/secRapid speed in return for releasing: 93 mm/secToothed rack pitch: 250 mmJaw confirmation: 5-6 kgf/cm2 (pneumatic)Mandrel confirmation: 5-6 kgf/cm2 (pneumatic)
Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm
One used WAFIOS straightening- and cutting machine for reinforcing wire from 6 to 15mm and cutting length up to 14.000mm