basic foodstuffs and animal feeds machines used for sale (509)

Heat chamber Dimensions 1.80 x 1.80 x 2.00 m high

Aspirator or grain pre-cleaner RUBERG RVS 150 Good condition! With leak aspiration Reserve shed available At a special price directly from the construction site. The machine is located in a recently decommissioned plant near Düsseldorf.

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

6-piece sedimentation oscillator with with stopwatches and accessories New condition, never used

Completely refurbished bagging scale unit with new electronic control Systec IT 8000 Application range from 5 to 30 kg for open Bags Storage container (ø 1.45 m x approx. 3 m) 2-speed dosing screw with new bearings Bagging spout ø 210

Good Plansifter BÜHLER MPAH 628 Screening box 2.15 h., 24 sieve, 6 pass. ( 2x B1, 2x B2, 2x B3 ) without sieve stacks, 36x floor nozzle ø150 new, Cleaned, drive reviewed

BÜHLER MPAD 814 Plansifter Power 3 kw Pendulum shaft drive, flat belt approx. 80 replacement screens (9 x new) good, ready-to-use condition

Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm

1000 litre bottom flap mixer with ploughshares 3 kw-67 rpm Chain drive

BÜHLER Stone Mill MSUA 400 4 kw V-belt drive n=500 rpm Inlet 100 mm diameter Engine rebuildt Bearing: oil exchanged

Homogenizer GAULIN MC 25 - 3TPS, SN.95L34613 Flow Rate: 10,000 l/h, maximum pressure: 170 bar, poppet valves 2-stage with MICRO-GAP valve for dairy products Main motor: 75 kW incl. control cabinet with automatic control Device will be completely overhauled, engine is newly stored,

vertical design, for simultaneous extruding of 4 strands, Sausage masses, etc. each strand with a diameter of approx. 15 mm, Capacity approx. 15 l, Drive 1.5 kW

Capacity 160 l, Stainless steel version, with lid Electric heating with temperature controller (30 to 80°C) With limiter 95°C, Outlet valve. With electric cabinet and motor START-STOP With propeller agitator, motor 0.37kW, approx. 300rpm Space requirement 600 x 600 x 1500 mm high, weight approx. 250 kg Already outdated, short-term from stock. (In the photo still with the saline solution for the TEST in the container)

was used to fill sugar cane molasses into containers open lubrication Dimensions 700 x 500 x 1200 mm

Type APT1000 UC Universal panier system suitable for fine and coarse panning (japanese crumbs and corn flakes) complete stainless steel mobile infinitely variable speed with blow-off system with an on-reel roll Track width 1000 mm Dimensions (L x W x H) : ± 2,800 x 1,850 x 2,500 mm

Dodmores Vibratory conveyor Serial: 30520 Stainless frame, 50Kg stainless hopper, overall length 2200mm, vibratory conveyor dimensions 2000mm x 600mm, mobile, 1Ph

Flow meter new by Endress + Hauser see Photos

Fully electronic flour bagging system from 25 to 50 kg. New electronic control IT 6000 E Triple dosing screw 3 x 0,75 kW Pneumatic actuators. 2 x bag nozzle with one-hand clamp. Inlet bin with electronic full/empty sensors. The entire plant has been overhauled and inspected

complete stainless steel suitable for thermo-oil heating (= 115 kW) Band length 3,000 mm Track width 400 mm Mesh width ± 10 mm Oil pump Level control Insertion tape Executable mechanical lifting device infinitely variable speed Dirt transport suitable for fire protection %, p/o (L x W x H) : ± 5,200 x 1,700 x 3,100 mm

Bühler trough chain conveyor new, still packed in wooden boxes. 18 pieces trough chain conveyor, different lengths and outputs 10 to 60 t/h immediately available Mob. +491715213204

Bühler trough chain conveyor new, still packed in wooden boxes. 18 pieces trough chain conveyor, different lengths and outputs 10 to 60 t/h immediately available Mob. +491715213204

Kemutec KEK Centrifugal sifter Stainless centrifugal sifter, ideal for sifting and screening dry powders and other bulk solids, available with either 4mm or 6mm stainless mesh, 3Ph

CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1,100 mm net length 11,000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : x 13,500 x 1,700 x 2,400 mm independent platen - air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (600 kW) with belt wash system

Falcon fryer Model: G1860 Serial: F211990 Stainless, single tank with twin basket, 24L oil capacity, 32.2Kw, natural gas

AFT Single shot depositor Stainless height adjustable frame, 25Kg hopper, fill range 25g - 100g, mobile, 1Ph

Extruder for food products. producer: model: MU A14342 machine performance: 1200 kg/h year: 2017

Kneading machine Kemper SPL 75 - 100 litres Masch. No. 672500 Strong and robust kneading machine in very good and well-maintained condition. Kneading machine from bakery.- 2 speeds- front and return pulse function timer no longer runs out- Operating hours: see photosPallet size, weight approx. 500kg (note when picking up) The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Key Vibratory conveyor Stainless vibratory conveyor, internal dimensions 1800mm x 650mm, hopper height 1550mm, discharge height 850mm, 3Ph

Bran Finischer Buehler MKL 30/80 with 2.2 kw motor with belt drive, Sieve edged. In good, cleaned condition with new bearings. Sale as available or with adjustments according to customer requirements in our specialist workshop