basic foodstuffs and animal feeds machines used for sale (505)

For sale is a powerful HST homogenizer, which has so far been used reliably in a cheese dairy. The device was built in 2016 and is in very good, well-maintained condition. It has been regularly serviced and is ready for immediate use. Line data: - Conveying capacity: 1,700 - 3,500 l/h - Maximum permissible operating pressure: 480 bar - Power main motor: 55 kW - Weight: 3,000 kg

Ritai 800L holding vessel Stainless, 800L capacity, jacketed vessel, holding tank, central bottom discharge

KEK Centrifugal sifter ideal for sifting and screening dry powders and other bulk solids, available with either 4mm or 6mm stainless mesh,

Horizontal peeler with stone jacket, can also be used as a scouring machine, e.g. for grain. Built in 2017, little used, as good as new. Intended for the peeling of cereals and legumes. Gentle treatment of the grain. Small size and compact Arrangement. Dust-free operation. Low energy consumption Capacity t/h 0.8-1.5 Drive power motor kW 5.5 Dimensions Length mm 1690 Width mm 680 Height mm 1430 Weight kg 490 The machine can be viewed on site in advance. Errors and prior sale excepted

Faber SMESAMA Manual disk cutter 2020, Stainless, manual disk cutter is used to make disks or half wheels from cheese wheels with rind or previously scraped, max input product size 500mm diameter and 320mm height, 4 disks per min, 3Ph

Weber Waagenbau u. Wägeelektronik, Automatic scale for weighing, year of construction 1989, with Weber control Dialog 165V-SWA, year of construction 2001, max. 2.5 kg, used, Can be viewed on site beforehand,

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Noble mushroom cultivation facility Various machines to be given away due to plant closure ! The facility consists of – Stainless steel conical mixer 6 m³ capacity, with control and new replacement drive as well as working test for cleaning. Cleanroom air conditioning with 5 filter stages (incl. HEPA filter) with heating coil incl. control and 12 speed levels. Air conditioning for grow room with heating and cooling coil incl. control. Air conditioning WOLF KG 96 volume flow 6000 m³/h, heating/cooling coil can be retrofitted, incl. control. High-pressure humidification system 125 bar adjustable, with 3 outlets separately controllable, 60-80 m mist nozzle line. Mobile cooling system 25 kW cooling capacity, adjustable in 2 power levels. WOLF gas condensing boiler CGB.2.20, heating capacity 20 kW in ...

Boska Cheese cutter Stainless manual cheese cutter, cuts into segments with wire cut, tabletop

Piston-valve doser (as good as new) available at short notice. Flyer: - Capacity: 600 - 1200 filling processes/h - Filling volume: 30 – 500 ml - Suitable for liquid and absorbent products - 2 cylinders / 2 filling nozzles - Only pneumatics are required - 50l flow tank - Actuation with foot switch

Producent: LOMA Type: IQ 3 Metal detector LOMA type IQ 3 with Intralox conveyor belt Multi-Frequency Metal Detector with Conveyor Belt With TOUCH screen operator terminal Product Feedthrough: 550 x 150 (100) mm (W/H) Fully automatic metal detection system with evaluation electronics Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Condition: tested, fully functional Availability: immediately Width approx.: 350 mm Length approx.: 1570 mm

8-fold roller mill BÜHLER MDDL 250 x 1000 mm B1/B2 - C1A/C2, 1 x grain feed (shaft/corrugation), 1x semolina feed, Knife scraper, gearbox converted to belt Original Bühler retrofit Feed drive B1 converted to geared motor Hand switch converted to solenoid valve Inlet and outlet divided Good condition!

From the dissolution of a plant in the food industry. Until now, soap was stored in it. Manufacturer: Tillverkare Linde Metallteknik AB Volume: 6000 l Year of Make: 1991 Optional: With Piping Location: Helsingborg Viewings possible by appointment from Monday to Friday.

A total of 48 external tanks are offered in the following sizes: 4 x 10 m³ 6 x 11 m³ 3 x 15 m³ 10 x 18 m³ 4 x 19.2 m³ 4 x 20 m³ 1 x 32 m³ 4 x 38.4 m³ 8 x 44 m³ 4 x 44.8 m³ The tanks come from a plant for industrial food production. Single or multiple acceptance possible. Location: Helsingborg (Sweden) Viewing possible by appointment Mon-Fri.

Gericke CSM centrifugat rotary sifter Stainless steel Year 1998 CM 215009

Hammer mill SIGMA 5.2 22 kW - 2850 rpm. 6x6 beaters, screening area approx. 0.22m², two inserts Enema with vibrating dosing Spout ø 100 mm laterally

RÜTER Control Sifter 4-piece, 600 high Product Distributor, Double Bearing, Covering 530my Screen stack cleaned, running pattern checked Good smoked condition

Stock# UG6390 Used stainless steel ribbon mixer by Młynpol (PL) model MP-3000. Mixer has volume 3000 l. Mixing shaft has welded double ribbon, and is driven via gearbox and el motor 22 kW. Central discharge outlet with pneumatically operated slide valve. Mixer is equipped with two hi-intensity agitators/choppers, each working with rotation 920 rpm. Top open, with hinged lid. Mixer mounted on stainless steel supporting frame. Shipping dimensions: L 510 cm x W 134 cm x H 195 cm x weight approx 2700 kg. Last time machine had been working in food industry.

Stock# UG6388 Little used single screw extruder by Farmet (CZ) model FE100 WE Clever Max. Machine can reach output in range from 90-130 kg/h. Power consumption 16 kW. Includes water pump, die cutting knife, some toolings. Local control panel with plc controls. Previously tested on animal food production. Dims: L 195 cm x W 102.5 cm x H 178 cm x weight 600 kg.

Stock#: U2466-1 Used stainless steel round vibrating screen by Allgaier (D) model D1200. Screen has working diameter 1200 mm. Single deck and cleaning deck with rubber balls. Central feeding inlet has diameter 200 mm. Side wall outlet has connection 145 mm. Central discharge of final product has diameter 200 mm. Screen is driven by two vibrating motors, each: 0,75 kW, 1000 rpm, 220-240/380-415 V, 50 Hz, kN 11,1 Ex design. Machine is mounted on stainless supporting frame. Additional equipment: - gravity feed metal detector by Cassel (D) model Shark 2, on stainless steel supporting frame - carbon steel construction frame with discharge stainless steel pipe and butterfly valve.

We have for sale little used Hunan Fumach Twin screw extruder. This extruder has undergone a complete overhaul where all electrical wiring has been refurbished, ABB motors, Siemens logic, etc. The modification work has been done in Finland and the modifications have been given the CE mark. The extruder meets all the directives required by the EU Twin-screw Extruder FMHE72 which can be used for processing cereals, snack food, Nutrition, rice protein, reengineering, Starch gelatinization, caramel, rice products, pet food, Aquatic product feed, etc. Manufacturer: Hunan Fumach Foodstuff Engineering & tech. co. Ltd Type: FMHE-72-24 Year: 2017 Production capacity: 300-1200 kg/h Screw type: Twin screw, diameter 72 mm Screw length diameter ratio: 24D Screw rotation speed: 50—500r/min Screw torque: 2100N.M Oil pump motor: 1.1 kw Barrel temperature: -20-300℃ Die temperatu ...

2 Elopak aseptic filling machines Gable format with 3 pack sizes 0.25, 0.75 and 1.0 l Both machines built in 2003 Type: Pure Pak PA 830 Serial No. 22064 Capacity: 2 x 10,500 E/h with Lid Storage Magazine with 3 co-rotating Elopak lid applicators with cardboard packing machine for 12 E/carton with complete palletizing system with pallet shrink-wrapping machine and b.) 2 complete process technology plants for fruit heating as plate heating systems and 1 sterile tank each, capacity5,700 l and 1 sterile tank with 7,500 l with automatic valves and 2 control systems

2 edible quark storage tanks with conical Spout and with intensive stirring with a mono pump for conveying into the Mixing and filling technology Tank capacity per tank: 1,300 kg Manhole above, agitator drive from above

A&F Butter Carton Packer As spare part machine last years of use, Type; 720-2.25.W4 Item no. 930300A Built in 1994 with garage content behind the A&F machine

1 A&F Butter Pieces Carton Packing Machine Molded Butter Carton Packing machine for 2 pieces of butter By A&F Jagenberg Group Formats: 25p0 g, xxx g Type: 720/2.25.W4 Item no.: 930390 B Built in 1994 With garage content behind the A&F machine

1 Galdi Gibelkarton filling machine for long-life fresh milk Type ESL milk with 30 days BBD Galdi model RG27Packaging format 1l, 0.5 l and 0.25 Cap at the moment OSO30 from 18.11.2025 (cap retaining ring) Year of Make: 2017 Operating hours September 2025 29,000 h Product ESL Milk, Soy & Oat Milk Performance 7,200 With outfeed belts, cap transport and our own CIP Most important spare parts package at 35,000 euros, still to be negotiated without ET

1 Waldner cup filling machine Round version, 2 cups/bar 95 mm with slip-on lid, Type Dosomat 1.2, No. 2070 Capacity 4,200 U/h, Year of construction 2014 with main feeder, circuit board Welding and slip-on lid feeding spout on round plates, Packing in crates by hand. Roller conveyor for the discharge of the filled Get.

Alpa Coagulator Soft Cheese Making Plant The Alpma system is built in 1992 and consists of the following plant sections Year of Make:1992 in operation until 2007 Manufacturer:Alpma Products: Feta cheese, Cammenbert cheese, Brie White Mold Cheese Hourly output 10,000 to 12000 litres per hour of milk supply The following accessories are included in the scope of delivery and plant components such as - Portioner TR. - Battery for feta cheese, Camembert diameter 86 mm - Battery for feta cheese, Camembert diameter 60 mm - Battery for Brie Soft Cheese - Horde tracks - Stackers for block moulds - Turner – Stacking track - Cross conveyor stack / drainer - Wender I - 4-lane drainer - Turner II - Cross conveyor stack / drainer - Intermediate railway to the Aushordun - Destacker for block molds - Umhordungsanlage / ziehanlage Type KZ - Dry salt plant - Tray S ...