Recycling units CROSS WRAP OY LTD. BO 4000

Technical data of the bale opener line for RDF, MSW, paper, cardboard:
Manufacturer Cross Wrap Oy Ltd., Siilinjärvi, Finland
Type BO 4000
Year of construction 2015
Number of opened bales 674 pieces
Operating time only 3 days, exclusively by running-in the entire system during new installation
Opening time approx. 45 seconds per bale
Bale dimensions (W x H x L) 1100 x 1100 x 1400 – 1900 mm
Max. bale weight 2,000 kg
Conveying height of the system 1,400 mm
Max. conveyor width of the system 1,200 mm
Openable material RDF/MSW
Availability of the system 98%
Noise level of the bale-opener line 85 dB(A)
Total connected load 37 kW
Rated current 125 A
SIEMENS SIMATIC HMI Touch operating display
Control SIEMENS S7 ET200S
Dimensions 8,463 x 2,890 x 3,960 mm (L x W x H)

Scope of delivery:
Feed conveyor 3,500 x 1,200 x 1,400 mm
Conveyor belt feed to opener 1,500 x 1,200 x 1,400 mm
Bale opener (grab with knife)

Special equipment:
Oil heating in the hydraulic oil tank
Control cabinet heating
Oil Cooler Hydraulic Power Unit

Explanation of the short playing time:
The entire line of Cross Wrap bale opener type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation of the plant was that in the event of an operational malfunction or maintenance of the incinerator, the municipal waste can continue to be received, pressed, wrapped and stored until the malfunction is eliminated. Then the bales should all be reopened and the waste fed into the normal incineration process.

This worst-case scenario never happened. The plant was set up, run in and has never been used in regular operation afterwards. Only during the commissioning and running-in of the entire plant in 2015, 674 bales were opened on three days. The plant is in a very good, immediately ready for use. Due to renovation work in the incineration plant, the installation area of the bale opener was required. As a result, the complete line is for sale.

Brief description of the bale opening process:
The pressed bales are placed on the feed conveyor belt from the side or from behind by means of a forklift truck. To open, the bales with the wire or twine tying must run horizontally to the conveyor belt, otherwise the bales must be rotated by 90° beforehand. The opening conveyor belt brings one bale at a time in front of the cutting unit. The grippers hold the wires or the yarn strapping. The rotating blade cuts the bale lengthwise. The gripper then returns to the starting position. The open bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the downstream conveyor system.

Remarks:
New price of the complete system 296,000 €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is completely available. The system has been dismantled into freightable units, stored and is available for inspection and loading at short notice. We assume no liability for the technical information or any errors.
seller offer No. resale Cross Wrap BO 4000