garden and communal machines used for sale (434)

Air nozzle 110 mm with flexible hose 80 mm, total length approx. 890 mm, shaft-mounted holder for 20 mm pipe

unused consoles o.a.., presumably to make "HOLDER". material thickness 10 mm € 200,-net + 19% VAT

Rollers loyal for three-point hitch. Splitt-, salt and sand spreaders, content 200 ltr. (with optional essay 280 ltr. possible), spread width 100 cm. Foldable litter floors and shutters made of V2A stainless steel, scattered wave with wear-resistant plastic elements, container cover with hinged bar. Min. for hydraulic drive with flow 12 / MAX 25 ltr. / min. Almost like new condition.

1 unused flail mower shaft to Dücker SMT 15

Lawn Sweeper for PTO 540 rpm, working width 180 cm, double Sweeper roller system, hydraulic high dump, electrical. Remote control acting on solenoid valves, ew 1 hydraulic connection required. Tank contents approx. 3 m ³, rear axle 6 x frosted. Drawbar adjustable in height, illumination device com. StVZO. Machine is relatively little used, brushes and Tin in good condition with paint defects inside the tank and signs of use. Incl. operating instructions, parts list, and ABE. Type same Kugelmann KDH 150 (150 cm working width) also available and more with working widths from 90 to 170 cm. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Reiser / parkland SCH 212/5 GM 150 Mowing/mulching and simultaneous collecting of grass, leaves, scrub, horse droppings, etc. Heavy, sturdy design: combination of truck chassis and superior flail, working width 1500 mm, container volume 5 m³, hydr. high dump (2,200 mm) as well as soil drainage through rear tailgate. Special features: 3 x adjusting possible hose rupture backups in the telescopic cylinders 11-speed adjustable cutting height 0-125 mm incl. ABE (General permission of operation) More mowing container stock!

Vertikzierer with ZUgeinrichtung, Zapfwellenatrieb: working width 100 cm Scarifier for three-point hitch, PTO: working widths of 110, 130, 160 cm other manufacturer working widths 140 and 150 cm Scarifier Combi machine - as a sweeper and flail can be used: Working width 170 cm other manufacturers 130, 150, 180 cm These machines are used and stock - see photos! Detailed information and prices on request.

We provide the following to the purchase :Itemnumber: 8868Plant Cover 12mx16mThe photos show an almost identical system.for more information please contact us.please keep the item number ready Shipping costs pls contact us; Second Hand

For sale: Used parts from spindle mower Agria 9300, also dieselengine Kubota V 1200 Other parts of / for reel mowers available to some types of Jacobsen, Ransomes and Sabo. Also complete spindle mower units, cutting moves, pull mowers, self-propelled mower. - JODAU environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

PTO hydraulic pump unit consisting of 1 piston pump (manufacturer unknown, no label present, only cast characters (only read number: 479 and 40 °) and a gear pump HALDEX W15A1 44 L K5 26NN.) Unaudited for screwdrivers for recovery. -Jacobis local, environmental & green care technology- Used machines for plant & sports center maintenance, Garden & landscaping, cemetery technology & winter service, sweeping work & disposal, environmental care, motors and more...

Suction mouth - chassis - unit - according to photo - unused, mint condition. also available: 4 St street tires 18.5 x 8.50-8 ' 6 PR TL (used Egholm ex), profile at least 80% good, manufacturer: GUR

Grass collecting container GAH 3060/2 fits Kubota front mower F3060 / F3560. Without turbine!

Used - parts, etc. Front axle - rear axle - steering cylindrical - Lenkorbitrol - diesel engine - seat - fittings - steering column cover - hood - gears - lights - hydraulic - cutting spindles - steering wheel - cooler - fuel pump - tank - snake - switch -. Bonnet etc.

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...

reverse soil tiller - 130 cm working width, right offset machine, three-point hitch cat. I, movable grilles roller 150 cm with scraper, 8 rows of blades, possible working depth 14 cm. Another reverse soil tiller 155 cm and soil tiller in stock!

Cabins of disassembly for the following machines: ISEKI SG incomplete ISEKI SF 300 330 333 ISEKI TX ISEKI 5000 / 5100 Gutbrod 2850 AS incomplete SABO 1502 Voss incomplete Ransomes 350 D incomplete Ransomes Commander 3510 Ransomes fairway 405 Shibaura CM reform Reform Muli - only door right side Kramer Tremo - only door right side

Sale of parts and assemblies ex large area mower Shibaura CM 364: Diesel engine 25 kw / hydrostatic transmission / axles / electric / cabin / wheels and more. no mower-deck.

Hand roller spreader with wheel drive, capacity approx. 60 ltr., spreading width approx. 70 cm. scattering way: salt about 5-6 km, Sand 1 km. Condition: Super See more winter maintenance technology from A to Z stock - photos!

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

Auction-ID: A1-46037-2895

Auction-ID: A1-46037-2987

Equipped with: type: D7 (diesel), 1827 hours, 1200mm cutting deck, Walker Mfg. Co., Fort Collins (USA), front mounted cutting deck 1200mm, collection system, hydrostatic drive, compact zero-turn steering, large rear collection container, diesel engine (Kubota, liquid cooled), transverse engine, collection capacity: ± 350 litres, cutting deck with flexible carrying frame, dimensions length: approx. 2.5 – 2.8 metres, width: approx. 1.1 – 1.3 metres, height: approx. 1.3 – 1.5 metres. Auction-ID: A1-40136-283

Equipped with Accord connection; conditioner; 7 knives with 2 knives each; Year of construction approx., 2000 Auction-ID: A1-40136-253

Equipped with atlas basket carrier, drive overhauled, new hydra engine, 80cc, 180 bar. Auction-ID: A1-40136-192

Year of manufacture: 2018 Serial Number: 165768 Auction-ID: A1-46037-2893

Drill Head Diameter: 70mm Auction-ID: A1-46037-2838

Auction-ID: A1-46037-2848

Auction-ID: A1-46037-2884

Power: 2.9kW Auction-ID: A1-46037-2913