Technical data (subject to change):
Machine:
Constant workpiece output from the chain path: 38 mm (incl. edge at
edge thicknesses 0.3 - 3 mm)
min. throughput width: 65 mm
with a maximum workpiece thickness of 25 mm
min. workpiece length in feed direction: 150 mm
Basic height (upper edge chain track): 960 mm
Workpiece:
min. workpiece length: 150 mm
min. workpiece width: 65 mm
min. workpiece thickness: 8 mm
workpiece thickness: 40 mm (with copy function)
workpiece thickness: 60 mm (without copy function)
Smallest workpiece: 150 mm x 150 mm, or
65 mm x 300 mm
Lateral protruding coating material: 0 mm
Edge material: paper, plastic and veneer
min. height: 14 mm
height: 65 mm
Roll material:
min. thickness 0.3 mm
thickness 3.0 mm
Veneer edges limited possible up to 1.0 mm
cross-section 130 mm²
min edge length 160 mm
upper edge protrusion: 5 mm
Equipment:
- Drive for throughput speeds of approx. 6 - 30 m/min., electronically
adjustable (feed link chain with 80 mm wide plates)
- Upper pressure with 70 mm wide V-belts
- Roller support rail, max distance chain track approx. 500 mm
- Suction requirement: air velocity of min. 28 m/sec. (Negative
pressure 2480 Pa)
- Machine control ICOS open compact
- Horizontally manually adjustable, unheated stop ruler
- Extended machine inlet consisting of:
Adjustment axis for the inlet ruler
Ruler extension with second adjustment unit
Feeder device, 5 rollers driven, man foldable
Inlet extension Novimat by 540 mm for sliding chain G80
- Double milling unit; with 2 motors 4.5 Kw, 150 Hz, 9000 rpm with
electronic positioning control. for infinitely variable horiz.
Adjustment, vertical adjustment with mechanical digital display, blow
nozzle and removal of loose particles on the workpiece side and
protective cover
- Gluing unit for straight edge and adhesive specification to the
workpiece. The edge thickness max. 3 mm, glue M5752847 specification
for workpiece thickness max. 60 mm, pre-melting container approx. 1 1
with autom. Granulate feeder and 2-fold edge magazine
- Cross-cut unit, pneum. swivel 0+25°, 2 x 660 W
- Flush milling unit top/bottom, 2 x 1000 W, with height probe
- Multiple machining unit for chamfering or radius milling of the
upper and lower longitudinal edges, as well as for copying the front
and rear workpiece corners. With horizontal and verictal tactile and
motorized horizontal positioning
- Profile drawing blade unit, with horizontal and vertical probe,
manually adjustable
- Drawing blade with electr. horizontal positioning
- Detergent spray unit
- Schwabbelaggregat, 2 x 180 W, individually vertically adjustable
- Groove milling unit 4.5 kW, with pneum. Insert control, maueller
90° swivel device (180-270°) and extraction hood