used Joiners circular saws for sale

Double cross-cut saws Hüllhorst With a third saw blade Type DH52 Year of construction: 1992 Maximum cutting width 3200 mm min. cutting width 220 mm Cutting length (length of the support rails) 2500 mm Saw blades cannot be swiveled With scoring Electric width adjustment Width display with magnifying glass Third saw blade and scorer in the table on the left side of the machine Without a splitting wedge and without a scoring saw blade, saw blades with a maximum diameter of 450 mm fit on the machine, the cutting height is then a maximum of 125 mm. For a saw blade with a diameter of 350 mm, the maximum cutting height is 75 mm Main saws motor power approx. 3.2 kW each Vorritzer motor power approx. 1.5 kW each Loading dimensions approx. L 5300 mm x W 2400 mm x H 1000 mm Weight approx. 2800 kg

Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg

SPECIFICATIONS: Max. saw blade diameter mm: 400 Saw blade inclination: 0° - 45° Saw carriage length mm: 3800 Installed capacity: Hp 7.5 Scoring diameter mm: 120 2 angle stops

Used sliding table saw Int. Art. Ref. m3527 Manufacturer: LAZZARI Type JUNO 3200 Year of construction 2000 CE With scoring machine Saw blade can be swivelled up to 45° Motor power 5.5 kW Speeds 2,800 and 4,000 rpm. Carriage length 3.20 m Weight approx. 750 kg Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shi ...

Length of the rolling table: 3.300 mmcutting width: 800 mmMotor output: 5,5 kWCutting height: 145 mmSaw blade diameter: 450 mmSpeed: 2800/4000/5500 U/min.weight of the machine ca.: ca. 900 kg: Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: - Cutting height and angle electronically controlled - Cutting width can be adjusted electrically via control - Length stop with continuous system, cutting length 60 mm - 2120 mm, extendable up to 3300 mm - Table size: 850 mm x 1050 mm in cast iron - Table extension over full table width - Transverse table dimensions 1340 x 650 mm, angle cuts according to scale without moving the fence; Fixed positions for 0°, 22.5°, 30° and 45° cuts - Extraction connection Ø 100 and 120 mm - Control via 5.7" touch screen via control panel at eye level - With document holder on the control panel - 3-axis scoring unit, electrically adjustable, pneum. can be closed/lowered Specifications: Trimming table length 3.0 m Cutting width 850 mm Saw blade swivel 0°-46° Cutting height max. 130 mm (saw blade Ø 400 mm) Table height 900 mm Motor power 5.5 KW (7.5 HP) 400 V-50 Hz  ...

I'm selling a sliding table saw with a scoring machine Manufacturer: OTTO MARTIN Model: T60 Classic Year of construction 2007 Cutting length 3200mm. Cutting width 1250mm (opzion) Cutting height max. 130mm (saw blade diameter 400mm) Saw blade and scoring swivel 0-46° digital Digital saw blade and scoring height adjustment Digital display of rip fence and working heights Activation of the main saw blade and scoring machine from the control panel. Main motor sliding table saw 5.5KW (7.5 HP) (4000/4800/6000 rpm adjustable) Scoring motor sliding table saw Tools, options, and accessories on the pictures included in the price. Very good condition. Available soon. Incl. full documentation and CE certificate.

Martin T60Classic sliding table saw Brand Martin Type T60C M-No.: V465053 Control panel Touch screen integrated at eye level in the suction support 2-axis control (saw height, inclination, manual cutting width via handwheels, but with digital readout on touch screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivelling: 0° - 45° Speed control: 4.000/4.800/6.000/ tpm Motor: 5.5 KW Trolley: 3,000 mm Cutting width: 1,250 mm mm Laying table: Galvanized steel with fixed-angle stops 0º, 22.5º, 30ºen 45º. Dimensions: 1,340 650 mm Long stop: 2,200 - 3,300 mm with 2 folding attachments and fine adjustment Suction: Top: ø100 mm, Bottom: ø120 mm weight: 1.400 KG Condition: fully functional tested

Martin T60Classic sliding table saw Brand Martin Type T60C M-No.: V465053 Control panel Touch screen integrated at eye level in the suction support 2-axis control (saw height, inclination, manual cutting width via handwheels, but with digital readout on touch screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivelling: 0° - 45° Speed control: 4.000/4.800/6.000/ tpm Motor: 5.5 KW Trolley: 3,000 mm Cutting width: 1,250 mm mm Laying table: Galvanized steel with fixed-angle stops 0º, 22.5º, 30ºen 45º. Dimensions: 1,340 650 mm Long stop: 2,200 - 3,300 mm with 2 folding attachments and fine adjustment Suction: Top: ø100 mm, Bottom: ø120 mm weight: 1.400 KG Condition: fully functional tested

T60C sliding table saw in CE equipment • Control 3.5" in control panel at eye level included • Handwheel for adjusting the parallel stop from operating position, digital display included • Cutting width 1,350 mm included Trimming table length 3.3 m Cutting width 1,350 mm "2-axis scoring unit, electric Scratch position left/right and scratch height can be positioned via control while the scoring saw is running, electronic display of the adjustment paths; automatic adjustment of the scoring system to each main saw blade; Blade change with ProLock; pneumatically liftable / lowered, separately from the main saw blade can be switched on / off; 0 ...

Description: Main saw: max. ø450 mm, cutting height: 170 mm, cutting angle adjustment: 0°-45° Speed: 2,800/4,000/5,500 rpm Front zipper saw: no Length stop: 2,200 - 3,300 mm with 2-point display Support table: with fixed stops and angle adjustment main motor: 5.5 kW, table length: 3,300 mm, cutting width: 1,100 mm, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 1,500 mm, weight approx.: 1,200 kg

Description: Main saw: max. ø450 mm, cutting height: 170 mm, cutting angle adjustment: 0°- 45° Speed: 2,800/4,000/5,500 rpm Roller carriage: 1900 mm Front zipper: no Length stop: 2,200 - 3,300 mm with 2-point display Support table: with fixed stops for angle adjustment main motor: 5.5 kW, table length: 1,900 mm, cutting width: 1,250 mm, Approx. Onsite Dimension. (l x w x h): 1,900 x 1,400 x 1,400 mm, weight approx.: 1,200 kg

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 2,500 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 1,900 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Equipment: - Scoring saw unit - Sliding table length 3300 mm - Cutting width 1250 mm, adjustable by handwheel - Cutting height and angle above hydr. Adjustable foot pedal - Control panel at eye level with digital display for cutting width, height and angle - Saw blade Ø 200-500 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt folding - Electrical: 400 V, 50 Hz, 3~, 13.0 A

Equipment: - Scoring saw unit - Miter stop - Trimming length 3300 mm - Cutting width 1100 mm, can be moved by hand, with digital display - Cutting height above hydr. Foot pedal adjustable - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrical: 380 V, 50 Hz, 3~, 13.0 A

Equipment/Specifications: - Handwheel adjustment of the rip fence - Saw blade height/angle can be adjusted via foot pedal - Saw blade Ø max. 450 mm - Control panel at eye level with digital displays for saw blade height/angle, cutting width and speed display - Scoring unit - Motor power 5.5 kW

Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.

Brand Martin Type T75PreX Year of construction: 2021 New exhibition MA7502050 sliding table saw T75 PreX with large screen 10.4" touchscreen T75P05-b "Option package 2, consisting of: Infinitely variable speed control 9.5 kW T7503-a Electromotive positioning of the parallel fence T7511-a Scoring system ""PreX"" 3-axis - scoring unit T7523-a" T7503-a engine power 9.5 kW (13 hp) S6-60%, with infinitely variable speed control for the main saw blade, adjustable from 2,000 - 6,000 rpm; modern, maintenance-free passive cooling of the inverter T7508/4-a: trolley: 3,300 mm T7509/3-a cutting width: 1350 mm T7511-a "Electromotive positioning of the parallel fence Measurement specification and digital dimension display in the control system; Ruler can be folded, position queried via sensor; complete in ...

Format and trimming circular saw model T 78 Cutting length 3300 mm 3 speeds Year of manufacture 94 Sale takes place in the ACTUAL state Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale In the case of used machines, any warranty is excluded, it is valid to buy as well as to inspect Terms of payment: Prices plus VAT. VAT, payment before pick-up or shipment Terms of delivery: ex location

minimax sc4e Format circular saw Motor 5kw 400V 50hz Suction nozzle diameter 120mm Suction nozzle. Saw blade protection 60mm Cutting width with parallel stop 900mm cut-off width on the left 3200mm Hem length: 2310mm Saw blade inclination 90-45° cutting height 90°: 100mm cutting height 45°: 63mm Saw blade diameter: 4000 1/min Weight approx. 454kg G&STÜ-5504524 Optional: Pre-scratch and upper protective hood

Description: Sliding Table Saw Serial Number V 412044 Speeds: 2800 / 4000 / 5500 r.p.m. Saw blade Ø: min 200 / max 450 mm Power 15Aserial number: V 412044, Approx. Onsite Dimension. (l x w x h): 4,100 x 3,700 x 1,450 mm, weight approx.: 1,500 kg

Used sliding table saw Int. Art. Ref. m3517 Manufacturer: Panhans Type 690 Built in 1992 With scoring machine Electrical. Drive and digital display for Saw blade swivel and rip fence method Electrical. Saw blade height adjustment Digital display on longitudinal stop Carriage length 3.20 m Weight approx. 1,000 kg With wiring diagram With mitre cutting angle Neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excl ...

Carriage length 3200 mm Motor power 5.5 kW Bmawcrk3xgg Scoring machine, motor power 0.75 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.2.2

SPECIFICATIONS: Table dimensions/height mm: 1140 x 670 x 900 Sliding carriage length mm: 3800 Cutting height with saw blade diameter Ø 400 mm a 90°-45°: mm 135-95 Saw blade inclination: 90° + 45° Post-forming Vorritzer Ø max saw blade chair: mm 125 Ø Suction connection: Ø 120 mm Ø max saw blade mm: 400 Engine power KW: 8

Description: Main saw: max. ø400 mm, cutting height: 130 mm, cutting angle adjustment: 0°- 45° Speed: 2,800/4,000/5,500 rpm Roller carriage: 3000 mm Front zipper: yes Length stop: 2,200 - 3,300 mm with 2-point display Support table: with fixed stops for angle adjustment main motor: 5.5 kW, cutting width: 1,250 mm, Approx. Onsite Dimension. (l x w x h): 3,400 x 1,650 x 1,400 mm, weight approx.: 1,000 kg

CATALOG NUMBER RE022 TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - 3000mm cutting length on the trolley - main spindle speed 3500/4500 rpm - 30mm spindle diameter - diameter of the main shield 300-400mm - max diameter of the scoring unit 125mm - power of the scoring unit 0.75 kW - rotational speed of the podcinak 8500 rpm - spindle diameter 20mm - cutting width at the guide 1280mm - sawing width with the use of bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90 ° / 45 ° 90 / 60mm - cutting height for 350mm 90 ° / 45 ° 5-115 / 3.5-80mm - cutting height for 400mm 90 ° / 45 ° 25-140 / 15.5-95mm - diameter of the extraction nozzle 80mm, 125mm - dimensions length / width / height 3300/3460 / 1500mm - weight 750 kg ADVANTAGES - new machine - DTR + CE documentation - warranty from the manufacturer - REMA - professional - ...

Ordering no: RE002 TECHNICAL DATA main saw diameter 300-550mm Height of the main saw adjustment vertically for a saw 0300 0-75mm for a saw ⌀350 15-100mm for a saw ⌀400 40-125mm for a saw ⌀450 73-150mm for a saw ⌀500 90-175mm for ⌀550 saw 120-200mm The height of the main saw adjustment at an angle of 45 ° for a saw ⌀300 0-50mm for a saw ⌀350 10-70mm for a saw ⌀400 28-85mm for a saw ⌀450 50-105mm for a saw ⌀500 63-122mm for ⌀550 saw 85-140mm Saw blade tilt 0-45° / (optional) 0-46 ° Length of sawing with an auxiliary table with the strip at the back of the table for a movable table 250 = 2500mm with a strip at the back of the table for a movable table 300 = 3000mm with the strip at the back of the table for a movable table 320 = 3200mm with the strip at the back of the table for a movable table 390 = 3700mm Sawing width using a bumper on an au ...

ADVANTAGES The price applies to the model - 6 axes - programmable tilt and lifting of the main saw, height and left / right position of the scoring unit, longitudinal ruler, transverse ruler - 7 inch touch panel - new machine - CE certificate - warranty from the manufacturer - REMA - professional - Polish production - 6kW main engine TECHNICAL DATA - main saw diameter 300-550mm - Height of the main saw vertical adjustment - for a saw ⌀300 0-75mm - for a saw ⌀350 15-100mm - for a saw ⌀400 40-125mm - for a saw ⌀450 73-150mm - for a saw ⌀500 90-175mm - for a saw ⌀550 120-200mm - The height of the main saw adjustment at an angle of 45 ° - for a saw ⌀300 0-50mm - for a saw ⌀350 10-70mm - for a saw ⌀400 28-85mm - for a saw ⌀450 50-105mm - for a saw ⌀500 63-122mm - for a saw ⌀550 85-140mm - Saw blade tilt 0-45 ° / (optional) 0-46 ° - L ...

I sell here several machines, equipment, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts. Therefore, be sure to check out my other auctions Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw ROBLAND Type: Z320 Alu format slide 320 cm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 285cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence up to 130cm 3 different speeds adjustable (4000/ 5000/ 6000rpm) Motor power main engine 5.5 KW Motor power scoring 0.55 KW Prior viewing is expressly desired, just leave your phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The machines can be picked ...

Catalog number R059 - new machine - CE certificate - saw diameter 400mm - cutting width of the parallel gardener in Z400, Z400 EL 1000/1350 / 1525mm - dimensions of the sliding carriage 3200mmx420mm - diameter of the saw and the scoring hole 120mm, 20mm - sliding table 420x3200 mm anodized - cutting length 3500mm - blade diameter (not included) max 400 mm, 350 mm with the scoring unit - 120 x 20 mm cutter - not included - cutting height 90 ° 125 mm, 45 ° 90 mm - 3 cutting speeds 3000/4000/5000 rev. / min. - cutting width between the saw and the parallel stop 1350 mm - transverse table (1420 x 650 mm) with transverse stop with 2 buffers - manual height adjustment and blade inclination - automatic star / delta switch - weight 850 - 1080 kg - 400 V / 7 kW (9.5 HP) motor (S6) - 1.3 kW undercutter power (S6) Net price: 29300 PLN Net price: EUR 6735 depending on th ...

SAC CS40 sliding table saw Year of construction: 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420 mm, Locking mechanism for easy plate loading in any position Steel sliding system Main saw mandrel (30 mm) 45° swivel Electric raising and lowering of the main sheet. Main motor 5.5 kW, self-braking motor Cutting speeds 2,600 - 4,000 and 5,600 rpm Saw blade diameter max. 400 mm Maximum cutting height 130 mm ( 90° ) 100 mm ( 45° ) Rip fence 1,500 mm Scoring saw motor 0.75 kW 120 mm (diameter scoring saw blade - 8,000 rpm scoring unit with external adjustment) Square length stop with stops, Extension table with mitre stop and sliding boom support. 400 V, 50 Hz Weight 820 kg CE, marked

Sliding table saw Fabr. Samco Model. Formula S2 Year: 1999 with Voritze with table spread with table publisher Motor 5.5 Kw Carriage 3200 mm with motor brake

Sawblade tiltable: 45 °Length of the rolling table: 3.200 mmcutting width: 1.270 mmMotor output: 5,5 kWCutting height: ca. 103 mm mmSaw blade diameter: 350 mmSpeed: 4.000 U/min.weight of the machine ca.: ca. 800 kg: Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type SI 15 WF Dimension of sliding table 2700x2300mm Table travel 2600 mm Max. the length of the ruler by saw 900 mm Saw blade diameter 400 mm Blade tilt 0-45 deg Table size: 1150x630 mm Main spindle diameter 30 mm Main motor 11 kW 380 V Maximum clearance 140 mm Transport dimensions 2700 2700x1800x1200 mm Weight 820 kg Price 1200 Eur (EXW Jonava, Lithuania)

Used sliding table saw Int. Art. Ref. m3495 Manufacturer: SCM Type SI 300n max. saw blade 315 mm Year of construction 2002 With scoring machine Carriage length 3.20 m Weight approx. 1,050 kg Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carrie ...

Table length: 3,800 mm Cutting width: 1,270 mm Scoring aggregate (saw blade Ø 120 mm) Saw blade-Ø max 400 mm Cutting height max. 130 mm Moro power 5.5 kW Speed 3,000 / 4,000 / 5,0000 rpm electr. adjustment of saw blade height, Saw blade swivel and cutting width Control in the machine body Length stop with digital displays Weight approx. 970 kg Technical data subject to actual equipment

Description: Diameter disc: 360 mm - unverified. Thickness: 3.2 mmcutting length: 1,360 mm, cutting width: 800 mm, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,700 x 1,600 mm, weight approx.: 300 kg

Description: Mobile table dimensions: 1650 x 320 mm . Workable workpiece width: 670 mm Useful cutting length: 1500 mm , Disc size: 315 mm x 3.2 mm ( 30 + 2  , , ,Z = 72 HW ) , Maximum revolutions: 6500 rpm , Engraving disc included, diameter: 80 mm and thickness 3.2 mm  , Included MAC 4V EXTRA driver with four different types of speed/feed rates that can be set.Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 1,500 mm, weight approx.: 400 kg

Description: Max. diameter of main saw blade: 400 mm Max. cutting height with saw blade at 90°: 125 mm Max. cutting height with saw blade at 45°: 88 mm Speeds of main saw: 3000/4000/5000 r/min LED display Saw carriage dimensions: 380 x 3200 mm Power of main saw motor: 7.5 HP (5.5 kW) Front-zipper blade diameter: 120 mm (Z12+12) Power motor front-zipper: 1 HP (0.75 kW) Speed of presaws: 8000 r/min Cutting width: 1300 mm Manual stop adjustment Mitre guide Manual adjustment of the side guide (saw width adjustment) Manual saw blade tilt adjustment, with digital readout 0-45° Motorised height adjustment for main saw Transport dimensions: 2000x1100x1100 mm and 3320x460x300 mm main motor: 5.5 kW, cutting width: 1,300 mm, Approx. Onsite Dimension. (l x w x h): 3,300 x 3,100 x 1,600 mm, weight approx.: 800 kg

-Manufacturer: Ulmia, circular saw type 1612 -Motor power: 2.2 kW -Speed: 2800 rpm -Saw blade: Ø 250 mm diameter up to 280 or slightly larger probably possible -cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Table dimensions in front of the saw blade without slide 300800mm; behind the saw blade 800800mm plus additional table self-made 500mm800mm (total 1300mm 800mm) -Sliding slide 750mm400mm -Space requirement 2.1m1.45m1.55m high -Transport dimensions 1.5m1.5m1.7m with pallet -Dimensions 1000/1340/H980 mm -Weight: 337 kg

Weibert CZ300 II Format circular saw Saw blade speed 4000 RPM (option 3000 / 4000 / 5000 RPM) Diameter saw blade 315 mm Saw blade swivel 90° – 45° Cutting depth at 90° / 45° 90 mm / 60 mm Cutting width parallel stop 700 / 1000 / 1350 mm Cutting length 1600 mm (option 2500 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 355 mm x 1595 mm (option 2200 mm) Dimensions cross table 970 mm x 540 mm Length of the swivelling cross stop 1565 mm + telescope extension up to 2550 mm Weight 600 kg – 710 kg Engine power 4.4KW 400V 50HZ (option 7 kW / 9.5 HP (S6) Suction nozzle 120 and 60mm Special Price: 5900,-€ incl.19% Pre-scoring unit (option) Diameter scribbled saw blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter saw blade 3.5 mm Pre-scribbling blade rotation speed 8200 RPM Vorritzsäge motor power 0.75 kW / 1 hp (S6)

FKS 250-1300 Circular sawing machines Max blade D.: 254 mm Be hem length 1250 mm RIP fence cutting width 610 mm The length width 845 mm Blade tilt 90 ° /-45 ° Table dimensions (L x W) 650 x 350 mm Table height 835 mm Blade rotation speed 4000 1/min Engine: 1, 5kW 230V Dust nozzle D.: 100 mm / 30 mm Weight: 142kg G & PIECES 5902030

FKS 315-1500E Sliding table saw Trimming length 1220mm Saw Blade Diameter 315mm Cutting height 100/75mm Cutting width with stop 940mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 2,4kW 400V Weight approx. 210kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900315

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

Weibert FKS 7 Sliding table saw Sliding table: 3.2 m Motor power: 5.5kw 400V 50HZ S1 Speed 3000-4000-5000 U/1 Saw blade diameter max 400mm Saw Blade Height Adjustment: Electric Saw blade swivel: 0-45° Digital Cutting height 90° /120mm - 45° /75mm Cutting width: 1350mm with scorer D=120 bore 30mm Weight 850 kg G&HM-FORMK-FKS7

Weibert FO-3 Sliding table saw Format sliding table: 1600mm Motor power: 400V 3 KW 400V Cutting height: 103mm Saw blade: swivelling, D= 315mm with cut-to-length stop cpl. WJ-110100 Special price: net 3353,-€ with VAT 3990,-€

Weibert FO-3 Sliding table saw Format sliding table: 2000mm Motor power: 400V 3 KW 400V Cutting height: 103mm Saw blade: swivelling, D= 315mm with boom cpl. WJ-100100

Weibert JTS-600XL-T Circular table saw Cutting length: max. 1600mm Power 2.5KW 400V 50HZ Saw blade Ø: 250mm Saw blade bore Ø: 30mm Cutting height 90°/45°: max. 80/54mm Cutting width: max. 610mm Sliding slide: 1600x240mm Sliding table stroke: 1700mm Machine table: 800x350mm Table widening: 800x270mm Table extension: 415x350mm Swivel range saw blade: 90-45° Speed saw blade: 4000 rpm Suction connection Ø: 100mm Weight: 170kg G&JET-100070XLT

Weibert WJ-K315 Format circular saw Format sliding table: 2550mm Engine power: 4 KW (5.5 hp), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° WJ-800100