other construction machines used for sale (1,011)

two Self-propelled Multifunctional Amphibious dredging/digging equipment SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. ALYTUS 2.2. PRIENAI 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT (2 identical unites) Basic descriptions: Overall Length – 12,9 m. Moulded Breadth – 6,8 m. Depth – 1,84 m. Max. Draught – 1000 mm. Gross tonnage - 50 (approx.) Net tonnage – 30 (approx.) Total power – 269 kW (Cummins NTA855) Crew – 1 people The lifting capacity of the equipment – 4 t. Maximum suction and digging depth – 6 meters from w ...

Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - /

Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious PRIENAI is new SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT Basic descriptions: Overall Length – 12,9 m. Moulded Breadt ...

Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious ALYTUS was operated for up to 400 hours – (Registered in the Lithuanian register) SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIP ...

The INGERSOLL RAND TH60 drilling rig is a versatile and powerful machine designed for various drilling applications. It is built with robust construction, advanced technology, and a user-friendly interface, making it suitable for both onshore and offshore drilling operations. The rig offers high performance, reliability, and safety features to ensure efficient and productive drilling operations. Specifications: Water Well Rigs - 2002 international with Cat engine, 18 speed, new front tires . Rig is 1979 TH60 with 5x6 garner denver punp with new gear and pump end. 640" of new 89mm6.1m(20´) 12mm 2 3/8" IF rod, two new stabelizers, new murphy fast plug. Rig is direct hyd so no air over hydraulic. Less prob easy to fix! There is a portable pump to use due to highway weight regulations. Find more here - / Contact us at -

1984 Schlüsselbauer Magic 1211 Manufacturer Information: Name: Maschinenbau Schlüsselbauer Machine Details: Model: Schlüsselbauer Magic 1211 Year of Building : 1984 Voltage : 380 V Control Voltage : 24 V Connected Wattage : 50 kW Frequency : 50 Hz Weight Total : 16,000 kg Country of Manufacture: Made in Austria 1984 Ernst Wagner KG Reutlingen HGU 3000 Type: HGU 3000 Load capacity: 3,000 kg Year of construction: 11 / 1984 Weight without battery: 4,410 kg Weight with battery: 6,410 kg Battery weight: min 200 kg / max 200 kg Find more here - / Contact us at -

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

2019 Aerzen D52S Rotary piston compressor Find more here - / Contact us at -

Plastic Poles SDS-01011 Floating Platform with Plastic Poles 600m2 Find more here - / Contact us at -

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -

Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -

for sale is a screening plant from Zeppelin, Year of construction 2015, Subject to prior sale, changes and errors!

Caterpillar C3.6 - Unused - 99 HP - TIER4F

Caterpillar C4.4 - Unused - 110 kW - JKT

Caterpillar C15 - Unused - 595 HP - HNR

Caterpillar C9.3B - Unused - 375 HP - NGL

ID3361 Toy Bird 1250 year/Baujahr 1997 Block saw, max. 2300 mm diameter, manual turntable, in 2021 completely new control system installed and saw motor overhauled Block saw, max. 2300 mm diameter, manual rotary table, completely new control system installed in 2021 and saw motor overhauled

ID3356 Corrosion repair framework year/Baujahr 2021 25-28 t Corrosion repair framework Corrosion Touch Up Scaffolding

From an operational resolution: Zagro UVB Z 500 S YEAR OF MANUFACTURE unknown 380 VOlt Emergency stop Saw rollers Ø 500 mm Cutting length 700 mm Cutting width 450 mm Cutting heights 530 / 650 mm Saw blade lengths 3720 / 3920 / 4120 mm Table size 1000 x 800 mm AC 230 V / 16 A Width 1000 mm Total height 1800 mm Total weight 180 kg ----Engine cover is missing--see photo---

From insolvency: Vibrating Bottle Rilco 56mm unchecked

From insolvency: Converter with vibrating bottle Rilco 380 volts 58mm Bottle Function tested

From insolvency: Converter Wacker FU 1.6 380 volts 2x cylinder connection 3-pin untested, because there is no suitable vibrating bottle available

; Accessories: 20FT Generator Set Container, Outside dimensions: 606x244x259, Internal dimensions: 575x226x237 (door height 230 & door width 220)

used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.

Inside dimensions: 1182022002650 (LWH in mm); Accessories: 40FT HC Brand New Genset Container

Hedge trimmer for excavator attachment for weight class 1–6to unused! Manufacturer Haener Baumaschinen Model HHE120 Condition Unused, never been in use, year of construction 2022 Weight class 1–6t Width 1.200mm Net weight 48 kg Operating pressure 180 bar Liter capacity 18-21 L/min Stock Special price

Rakes, tear hooks for excavator attachment for weight class 1–3to unused! Manufacturer Haener Baumaschinen Model HRR30-570 Condition Unused, never been in use, year of construction 2022 Weight class 1,–3to Width 300 mm Net weight 32 kg Stock Special price

Multi-purpose grabs, sorting grabs, grabs for weight class 3.5–6.5t unused! Manufacturer Haener Baumaschinen Model HMZG300R Condition Unused, never been in use, year of construction 2022 Model HMZG300 Weight class 3.5–6.5t Opening width 1206 mm Height 747 mm Width 505 mm Clamping force 29 kN/bar Net weight 300 kg Operating pressure 300 bar Capacity per litre 25 L/min Rotator Thumm 605 Stock Special price

Multi-purpose grabs, sorting grabs, grabs for weight class 2.5–3.8t unused! Manufacturer Haener Baumaschinen Model HMZG200R Condition Unused, never been in use, year of construction 2022 Weight class 2.5–3.8t Opening width 944 mm Height 601 mm Width 400 mm Clamping force 19 kN/bar Net weight 200 kg Operating pressure 250 bar Capacity per litre 15 L/min Compact Rotator Stock Special price

Multi-purpose gripper, sorting gripper, gripper for weight class 7.5 - 13to unused! Manufacturer Haener Baumaschinen Model HSOG500 Condition Unused, never been in use, year of construction 2022 Weight class 7.5–13t Opening width 1500 mm Height 943 mm Width 600 mm Clamping force 48 kN/bar Net weight approx. 520 kg Operating pressure 300 bar Capacity per litre 40 L/min Stock Special price