other wood working machines used for sale (1,428)

- Approximately the following are included: - 25 units for 50 mm axle of various profiles. - 8 units for 40 mm axle of various profiles. - 20 spacer rings for 50 mm shaft. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-35

- Engine 1.47 KW-2900 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-90

- Total installed power 23 KW. - Working width 300 mm. - Gluing equipment for PUR glue. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-85

- 4 KW-1430 rpm motor. - Fan with a diameter of approx. 350 mm. - Inlet tube diameter approx. 400 mm. - Dimensions for transport approx. 1200 x 800 x 850 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-16

Consisting of two piecesType: GOP 55-36incl. matching tool caseReference: Common - Lot 17 Auction-ID: A7-46763-139

Reference: Common - Lot 24 Auction-ID: A7-46763-145

- Centrifugal viruter mill with knife ring for the manufacture of flat chips. - Main motor power 315 KW. - Power of the hydraulic power plant 2.60 KW. - Rotor rotation speed 1107 rpm. - Rotor diameter 1393 mm. - Number of blades: 54. - Blade length 690 mm. - Maximum production up to approx. 20000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-9

- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-14

- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 25 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-7

Equipped with control cabinet, \"Siemens\" control panel with digital readout, cooling unit, glue-planing unit, safety lasers, extraction hose to the ceiling and manuals, working width 4000 mm: (note, malfunction in pneumatic system) Auction-ID: A1-44305-15

Consisting of 2 cabins; equipped with \"Vapac\" Microvap humidifier; fans; control box; heating unit; insulated panels and door; Total size approx. 515x182x216 cm Auction-ID: A1-44305-32

- Oscillating screen with 2 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of fine chips used in the outer layers of chipboard, equipped with 10x10 mm - 2.20 - 2.28 - 0.21 meshes. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-12

This is a combination of lots 12 and 13 consisting of 2019 \"Soest\" RC-400 rolling machine and \"Soest\" VP-2-400 polishing and brushing machine Auction-ID: A1-44305-14

- Updated in 2002. - Total installed electrical power approx. 200 KW. - Capacity 10000 kg/h (atro) - Water evaporation 9700 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 520 °C. - Gas outlet temperature 130 °C. - Chip output temperature approx. 60 °C (at ambient temperature 10 °C). - Total thermal energy consumption approx. 8,670,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator. • Fuel oil burner: maximum consumption 600 kg/h. • Dust burner. • Mixing chamber. • Rotary drum dryer: diameter approx. 4000 mm, length approx. 12000 mm. • 4 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: un ...

- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 22 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Upper feed hopper with vibratory system and magnet for separation of metal elements. - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-6

- Oscillating screen with 3 independent screening floors for sorting wood chips and shavings. - Equipped with interchangeable meshes, designed for the classification of chips used in the inner layer of chipboard, equipped with 10x10 mm - 2.20 - 0.36 - powder meshes. - Total installed power 15 KW. - 2 chip inlets with a diameter of 650 mm. - 3 + 3 sieve planes with a total sieving area of 78 m². - Chip outlets: 3 with a diameter of 650 mm and one with a diameter of 500 mm. - Longitudinal distance between supports 3730 mm. - Transverse distance between supports 3940 mm. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accr ...

Concerns a combination of lots 1 and 2 \"ETA\" eHACK 170 EP Biomass boiler and 60m3 wood tension silo Auction-ID: A1-44305-3

- Updated in 2002. - Total installed electrical power approx. 180 KW. - Capacity 8500 kg/h (atro) - Water evaporation 8500 kg/h. - Initial humidity 100% (atro). - Final humidity 3% ±1% (atro). - Gas inlet temperature 550 °C. - Gas outlet temperature 120 °C. - Total thermal energy consumption approx. 7,800,000 kcal/h. - Maximum pressure allowed: 26 mbr. - Includes: • Hot air generator. • Fuel oil burner: maximum consumption 600 kg/h. • Dust burner. • Mixing chamber. • Rotary drum dryer: diameter approx. 3600 mm, length approx. 11000 mm. • 2 cyclones for the separation of dry material from process air. • Fans and pipes. • Support structures with stairs and walkways for inspection and maintenance. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal a ...