presses for recycling used for sale (282)

Technical information baler:Manufacturer HSM GmbH + Co. KGTyp VK 4812 Year of construction 2014Hours of operation 5,612 hours, stand August 2025Press power main press 48 tonsSpecific press capacity 58,2 N/cm²Feed channel 1,250 x 1,020 mmTheoretic cycle time 11.2 sec.Theoretic throughput rate 332 m³/hourBale size 1,100 x 750 x 600 up to 1,200 mmDriving motor 30 kWConnected load 32 kWRated current 59 ATying system 4-fold horizontal, fully automaticThroughput rate at abulk weight of 20 kg/cbm up to 6 tons/hourbulk weight of 50 kg/cbm up to 13 tons/hourBale weight up to 550 kg, depends on materialSPS controller Siemens SIMATIC S7-200Operating panel Siemens HMI Touch PanelFilling quantity hydraulic oil tank 300 LOil type HVI 46Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h)Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h)Machine weight p ...

For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations.Technical data baler:Manufacturer Bollegraaf Recycling Machinery B.V.Typ HBC 60AYear of construction 2000Hours of operation 32,169 hours, stand November 2024Press power main press 60 tonsPress power of pre-press max. 25 tonsFeed channel 1,320 x 1,100 mmTheoretic cycle time 18 sec.Bale size 1,100 x 720 mm, lenght variableDriving motor 45 kWConnected load 60 kWTying system 5-fold verticalThroughput rate at abulk weight of 30 kg/cbm approx. 5,5 tons/hourbulk weight of 50 kg/cbm approx. 10 tons/hourbulk weight of 100 kg/cbm approx. 16 tons/hourBale weight 400 up to 750 kg, depends on materialSPS controller Telemecanique TSX MicroMachine weight baler approx. 24 tonsScope of delivery:1 piece chain belt conveyor1 Bollegraaf HBC 60A baler with whirling unit1 m ...

Technical data baler:Manufacturer Presto GmbH & Co. KGTyp CC 36 MYear of construction 2010Hours of operation 3,641 hPress power main press 36 tSpecific press capacity 467 N/cm²Feed channel 1.080 x 1100 mm (l x w)Cycle time 34 sec.Capacity per cycle time 0,85 m³Theoretic throughput rate 90 m³/hThroughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hourBale size 1100 x 750 mm (w x h), length variableDriving motor 15 kWTying 4-fold vertical, semi-automatic, with polyester synthetic yarnThroughput rate at abulk weight of 35 kg/cbm 1,8 to/hbulk weight of 60 kg/cbm 2,5 to/hbulk weight of 100 kg/cbm 3,1 to/hTransport dimensions only baler 4.200 x 1.640 x 2.200 mmMachine weight baler approx. 4 toComments:The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating  ...

For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross bindingTechnical data baler:Manufacturer BollegraafTyp HBC 110 K / 75 kWYear of construction 2007Press power main press 100 tonsPress power of pre-press 50 tonsOperating hours 22,605 hoursFeed channel 1,600 x 1,100 mmCapacity per cycle time 3,15 m³Theoretic cycle time 19 sec.Bale size 1,100 x 1,100 mmDriving motor 75 kWConnected load 126 kWFull load current 238 ATying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm approx.16 tons/hbulk weight of 50 kg/cbm approx. 25 tons/hbulk weight of 100 kg/cbm approx. 47 tons/hBale weight up to 1400 kg, depends on material and bale lenghtVolume oil tank approx. 1,300 lSPS controller Telemecanique TSX MicroOperating panel Schneider MAGELIS TouchBaler dimensions built up ...

For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996, refurbished in 10/2024Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h)Machine weight baler approx. 40 tonsComments:The baler was ...

In the pipeline Presto HPK 50 HS baler, built in 2012, with perforator and riser belt (sliding belt conveyor belt) Manufacturer: Presto Type: HPK 50 HS Year of Make: 2012 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Flow rate: approx. 220 m³/h Clear filling opening: 1380 x 1200 mm Materials: paper, cardboard, foil, PET bottles Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to c ...

Channel baler Presto HPK 50 HS, built in 2014 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2014 Drive: 30 KW Press force: 50 t Hours: 7145 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Materials: paper, cardboard, foil, PET bottles Note: Knives and counter-blades as well as all sliding plastics have been replaced. The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The user manual and CE declaration are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability f ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 €: 1510.11 €: 130 to: 1000 mm: 640 mm: 210 mm: 5 - 110 mm: 60 1/min: 630x400 mm: 90 mm: 330 mm: 11 kW: 2200 mm: 1372 mm: 3000 mm: 8200 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 25700 €: 490.87 €: 15 to: 1.4 mm: 320 mm: 490 mm: 130 mm: 1 - 40 mm: 200 1/min: 4 : 40 mm: 30 mm: 200 mm: 215 mm: 1.5 kW: 1160 mm: 1180 mm: 1730 mm: 922 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barrierstwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 070145 : prompt, Zwischenverkauf v : Türkei : 44500 €: 849.95 €: 1 : 40 to: 4 mm: 630 mm: 450 mm: 160 mm: 3 - 75 mm: 154 1/min: 420 x 275 mm: 8 : 75 mm: 40 mm: 230 mm: 293 mm: 4 kW: 1174 mm: 1540 mm: 2200 mm: 2850 kg8-fold ram guide2-hand control panel and foot pedalAutomatic central lubricationFront light guardVibration padsUser Manual in German with CE Declaration of ConformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 €: 1181.25 €: 63 to: 750 mm: 500 mm: 170 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 90 mm: 270 mm: 440 mm: 7.5 kW: 1800 mm: 1150 mm: 2750 mm: 4100 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 64000 €: 1209.6 €: 80 to: 900 mm: 540 mm: 180 mm: 4 - 102 mm: 54 1/min: 490x325 mm: 280 mm: 380 mm: 7.5 kW: 2010 mm: 1390 mm: 2750 mm: 5400 kg8-fold ram guidefront protection by light guardmanual stroke adjustmentram adjustment witch ratchetdrive over gearcombined clutch brake unit with pneumatic controlfix tablesingle and continuous strokefoot pedal and 2 hand controlmech. overload safety deviceautomatic central lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 €: 1848.42 €: 160 to: 1100 mm: 700 mm: 210 mm: 23 - 110 mm: 60 1/min: 630x400 mm: 8 : 95 mm: 65 mm: 325 mm: 480 mm: 2400 mm: 1430 mm: 3200 mm: 9950 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 70300 €: 1328.67 €: 110 to: 900 mm: 540 mm: 180 mm: 14 - 114 mm: 60 1/min: 490x325 mm: 90 mm: 280 mm: 7.5 kW: 1870 mm: 1320 mm: 2800 mm: 5600 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 €: 643.67 €: 30 to: 2 mm: 400 mm: 600 mm: 150 mm: 1 - 60 mm: 140 1/min: 4 : 60 mm: 40 mm: 200 mm: 300 mm: 3 kW: 1300 mm: 1150 mm: 2050 mm: 1670 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barriersmechanical overload protectiontwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesOptions: vibrations pads € 132,- bolster plate € 720,-picture incl. optional available bolster plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070125 : prompt, Zwischenverkauf v : Türkei : 40200 €: 767.82 €: 1 : 40 to: 2.5 mm: 450 mm: 650 mm: 150 mm: 1 - 80 mm: 125 1/min: 4 : 75 mm: 40 mm: 225 mm: 300 mm: 835 mm: 4 kW: 1350 mm: 1370 mm: 2330 mm: 2100 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barriersmechanical overload protectiontwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesOPTION:Vibration pads € 192,--Bolster plate € 830,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3. Compaction – Final compaction: 3.400 kN, Door cylinder force: 600 kN, Feeding opening press housing (L×W): 1.950 × 1.420 mm, Degree of compaction: approx. 44 %, operating hours: 29.400 h

3. Compaction – Final compaction: 3.400 kN, Door cylinder force: 600 kN, Feeding opening press housing (L×W): 1.950 × 1.420 mm, Degree of compaction: approx. 44 %, operating hours: 17.400 h

Baler Avermann, type AVOS 1411 – 37/60, press force 60 t, year of construction 1994, good condition, with conveyor belt Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of Make: 1994 Engine hours: 21,900 Pressing force: 60 t Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Idle flow rate: 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9000 mm Machine dimensions: approx. 6000 x 1700 x 3730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The press is still set up and can be visited under power on request. Dismantling and loading are not included in the scope of delivery. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided o ...

Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visi ...

Just Arrived Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2020 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee ...

Baler Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: paper, cardboard, foil The press is in good, working condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without ...

Filling box: 1.200 × 1.000 mm, Length of press chamber: 1.900 mm, Wide press chamber: 1.000 mm, Deep press chamber: 400 mm, Prepress force: 150 t, End pressing force: 250 t, Sliding door crane: 25 t, Control: Rexroth Logic Control Block, oil cooling motor: 2,2 kW, Cooling pump performance: 195 l/min

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We  ...

: neu : 2025 : 070096 : prompt, Zwischenverkauf v : Türkei : 28800 €: 550.08 €: 1 : 20 to: 1.7 mm: 360 mm: 550 mm: 140 mm: 1 - 50 mm: 160 1/min: 4 : 40 mm: 35 mm: 200 mm: 240 mm: 2.2 kW: 1360 mm: 1100 mm: 1860 mm: 1250 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barriersmechanical overload protectiontwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesINCL. OPTIONAL INVERTER FOR CONINOUS SPEED SELECTIONOPTION: Vibration pads € 132,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 92600 €: 1750.14 €: 160 to: 6 mm: 750 mm: 1100 mm: 230 mm: 1 - 172 mm: 45 1/min: 6 : 100 mm: 80 mm: 375 mm: 540 mm: 11 kW: 1890 mm: 1950 mm: 3650 mm: 15500 kgWelded steel construction body frameCrankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precisionSnBz-12 quality bronze to bearings, grinded for min surface resistanceRam supported from 6 sidesPneumatic counter-balancing of the ram7", touchscreenGears in oil bathPneumatic clutch-brake combinationPLC control for safetyPhotocell light barriersMotorized slide adjustableMechanical overload fuseTwo hand and foot pedal controlAdjustable stroke (inverter)automatic centrallubricationMachine and equipment in conformity with CE-regulations(sample photos)OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r.etc.The data for this ad was c ...

Alko Clean Air Extraction System Mobil Jet 250 on Weima Briquette Press TH200 Press and extraction system overhauled by a specialist Press 100 L hydraulic oil changed Extraction system filler completely replaced Execution: Two-part (due to transport and insertion) Chip space elevation Extraction system with extinguishing device (newly filled) Control with machine detection and slide control Press: 831 operating hours (extraction even less) Control: Automatic and manual control (control of the individual cylinders possible by hand!) Height: 2800 mm Length: 2300 mm Width 1100 mm Operating instructions and circuit diagrams available Loading with forklift possible. Call and make an appointment for a viewing

Technical data Maximum pressure: 9 tons Year of Make: 2010 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz Machine is fully functional after technical supervision. Feel free to contact us! Machine is fully functional after technical supervision.

Technical data Maximum pressure: 26 tons Power connection: 400 V/ 4.6 kW Press force: 2.7 kg/cm² Year of Make: 2016 Bale size: 1200x800x1150 mm Bale weight: approx. 400-450 kg Price: on request Machine is fully functional, after technical supervision and renovation.

Technical data Maximum pressure: 24 tons Power connection: 400V / 4kW Press force: 2.5 kg/cm² Year of Make: 2012 Bale size: 1200x800x1000 mm Price: on request Bale weight: approx. 400 kg Machine is fully functional after technical supervision. There is a possibility to order the machine with paint renovation. For more information, please contact us by email or phone!