9 PRESTO used machine for sale

Technical data cardboard shredder (2-shaft shredder): Manufacturer: Presto GmbH & Co. KG Type PZA Year of construction 2007 (52,998 h and 55,325 h) Throughput volume 130 m³/hour Speed 37/9 1/min. Motor power 7.5 / 2.2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder external dimensions without hood 2,308 x 1,320 x 685 mm (L x W x H) Machine weight 0.45 t Use of the systems: The 2 pieces of cardboard shredders of the type PZA were used in a Dutch logistics center to pre-shred loose, erected cartons from the returns department and then press them into bales. The cartons were fed by hand onto the feed belt and were transported directly to the carton shredder with a sliding belt conveyor belt and torn. The pre-shredded cartons were then transported over hundreds of meters to the baler and pressed there. Sco ...

Technical data press: Manufacturer: Presto GmbH & Co. KG Type CC 36 M Year of construction 2010 Operating hours 3,641 hours Press force main press 36 t Specific pressing force 467 N/cm² Dimensions of the insertion tray 1,080 x 1100 mm (L x W) Cycle time 34 seconds Filling volume / pressing cycle 0.85 m³ Theor. Throughput capacity 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale dimensions 1100 x 750 mm (W x H), length variable Drive power 15 kW Tying 4-fold vertical, semi-automatic, with polyester plastic yarn throughput capacities with a Bulk density of 35 kg/cbm 1.8 t/hour Bulk density of 60 kg/cbm 2.5 t/hour Bulk density of 100 kg/cbm 3.1 t/hour Transport dimensions excluding press 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight press approx. 4 t Remarks: The press was checked for funct ...

WE ARE SELLING A PRESSTATION WITH A SNECK SYSTEM WITH/WITHOUT ONE CAPACITY, SUITABLE FOR PRESSING RECYCLED RAW MATERIALS! MANUFACTURER - PRESTO GmbH (Germany) Type: SPN15 Year of Manufacture - 2006 CAPACITY - 30 m³ Power - 11 kW Can be sold unpainted or new painted. PRICE ON REQUEST!

In the inlet: Presto CC 40 M baler with lift-tilt device Specifications: Manufacturer: Presto Type: CC 40 M Year of Make: 2017 Press force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-ply, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t(h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: paper, cardboard, foil Remark: Fully automatic regulating channel outlet, lift-tilt device for MGB 660, 770 and 1100 L empty containers. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any tim ...

Baler Presto CC 50 M, semi-automatic, year of construction 2015, press force 50 t, with lift-tilt device Specifications: Manufacturer: Presto Type: CC 50 M Year of Make: 2015 Hours: 1932 Press force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput at bulk density of 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, foil The user manual is available in German. Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video at the top of the pictures, or on our website or YouTube channel. Viewings, also under power, are possible at any time by arrangement. On  ...

Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual

Format: A3 // Paper format: ca 31x45cm

Radius cutter, milling cutter -Finishing cutter -1x Diameter: 84 mm Height 44 mm R12 mm -1x Diameter: 102 mm Height 53 mm R15 mm -1x Diameter: 114 mm Height 70 mm R20 mm -Type: HSS -Quantity: 3 pieces -Sale: only complete set -Weight: 5.4 kg

Manufacturer: PRESTO Model: CC 20 V Type of Machine: Horizontal Baler Year of Manufacture: 2022 Technical Data: • Weight approximately 2800 kg • Maximum press pressure 200 bar • Press force 200 kN • Specific press force 381 kN per square meter • Safety system IP 55 • Rated current 15.5 A • Rated voltage 400 V, 50 Hz • Motor power 7.5 kW • Connection fuse K 32 A • Power supply 3 L / N / PE, 400 V, 50 Hz Dimensions: • Length 3390 mm • Width 1235 mm • Space requirement 4900 x 2550 mm • Height 2130 mm • Loading height 1245 mm Baling Chamber: • Feed opening 1000 x 750 mm • Chamber dimensions 700 x 750 mm • Maximum filling volume 0.53 cubic meters • Cycle time 24 seconds • Number of ties/straps 3 Throughput Capacity: • 35 kg per cubic meter (department store waste): 2.2 • 60 kg per cubic meter (mixed goods): 3.4 • 100  ...