[ dealer profile ]
We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
TECNAU LIBRA 800
printing machines / presses: other
HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; ...
Manufacturer: TECNAU
Model:LIBRA 800
item-No.: 168778873
Quantity: 1
Date: 09.03.2026
Year of manufacture: 2017
Location:
Switzerland
Price:
Machine in stock:No
Seller-item-No.:40001.26
HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON
DEMAND") AND SHORT RUNS – TECNAU LIBRA 800
Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers.
Performance: from print run 1; up to 800 copies per hour
Book Format: min. 100 x 125 mm / max. A4
Thickness: min. 2 mm / max. 60 mm
Equipment / Further Details:
Line Configuration:
1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing.
2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed.
3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder.
4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing.
5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block.
6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on choiceing the right belt.
7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types.
8.System Control Software
Finishing Line
The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control:
• Information on book dimensions and inserts (quantity and sequence)
• Binder setup (spine position, thickness, and length)
• Cover preparation: Softcover → creasing, cutting, edge trimming
• Correct book-to-cover matching
• Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)
Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.
Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers.
Performance: from print run 1; up to 800 copies per hour
Book Format: min. 100 x 125 mm / max. A4
Thickness: min. 2 mm / max. 60 mm
Equipment / Further Details:
Line Configuration:
1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing.
2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed.
3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder.
4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing.
5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block.
6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). The cooling belt can be configured according to the available space and requirements at the machine's installation site. The price of the belt depends on the configuration. We would be happy to advise you on choiceing the right belt.
7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types.
8.System Control Software
Finishing Line
The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control:
• Information on book dimensions and inserts (quantity and sequence)
• Binder setup (spine position, thickness, and length)
• Cover preparation: Softcover → creasing, cutting, edge trimming
• Correct book-to-cover matching
• Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)
Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) will be done by the manufacturer / Tecnau.
Share this machine on Facebook: