Baling presses UNOTECH UPAMAT 120 V5 H3 So

automatic baler

Manufacturer: UNOTECH

Type: UPAMAT 120 V5/H3/So

Hours: 85 hours

Year of Make: 2022

specifications:

Length of the channel baler: approx. 13,500 mm

Width of the channel baler: approx. 2,400 mm

Height of the channel baler: approx. 3,400 mm

Weight of the channel baler: approx. 47,400 kg

Filling opening: 1,020 x 1,600 mm

Channel cross-section height x width: 750 x 1,100 mm

Bale weight depending on length and material 600 - 900 kg

Press force plunger: 1,000 kN at 260 bar

Cutting force: 1,200 kN at 315 bar

Electrical data:

Operating voltage: 400 V/3 PE

Frequency: 50 Hz

Voltage tolerance: +/- max. 5%

Degree of protection: IP 55

Control: Siemens S7 1.500

with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h.

Pumps on pump plate completely piped and installed in the oil tank.

Oil tank capacity 3,000 Ltr

Volume output

idle max. 850 m³/h

under operating conditions max. 410 m³/h

Weight performance depending on the bulk density

for 20 to 30 kg/m³ approx. 12.0 t/h
for 30 to 50 kg/m³ approx. 17.0 t/h
up to 60 kg/m³ approx. 21.0 t/h
up to 100 kg/m³ approx. 31.0 t/h

Bale weights 600 to 900 kg

including:

- Oil drip pan + leak oil warning device

- Vertical twist - V5 

- Wire Unwinders - Subwire - (5)

- Wire Unwinders - Top Wire - (5)

- Horizontal twisting - H3 - Cross bonding

- Wire unwinders - horizontal - (6)

- LED lighting inside the binding

- Press box side walls of the channel baler planked and screwed with 10 mm wear plates made of special steel (HARDOX)

- Free kick 250 kN - narrow

- Press filling hopper (EÖ. 1,600 mm)

- Large bale chute (1,100 mm)

- Walking area with ascent stairs to the tying unit

- Remote diagnostics system

- Large digit display

- 3. Light barrier as overcrowded light barrier

- Multi-channel adjustment "ACC"

- Key transfer system (multi-key system)

- Central lubrication point for pressure plate rollers with maintenance position

- Steel sheathing for e-cables

- Hydraulic Needle Plane Gate TSC

- Planking adjustment channel with stainless steel (VA) sheets

- Manhole cover with angled inlet corners

- Belt control for a drive power of up to a maximum of 7.5 kW with soft start

- Belt filling hopper (EÖ. 1,600)

Optional:

Press feed conveyor with older year of construction

Feed length approx. 4 m according to pictures

Bale take-off belts according to photos from 2022
seller offer No. resale 167867715