242 results

similar results found in category boom lifts

item-No.: 139518980
Coordinate grinding machine Hauser 3 SMO Machine: - used, well-maintained condition - Built c. 1967 - Working range 400 x 250 mm - Optical round table diameter 300 + adapter plate diameter 400 - Swivel round table diameter 200 - 3 x centering microscope - new frequency converter for optical and acoustic control (new installed in 2015 at a price of 5650 euros) - Groove grinder and 2 motors - 2 x high-speed motors, 2 x standard-rotor motors, there are suitable collets for each - 1 x air turbine - 2 x  ...
item-No.: 139221620
Very nice radial drilling machine boom approx. 3 mtr.incl tool holders and clamping cubes
item-No.: 139170535
Column swivel crane Make: ABUS Type: VS Machine No: xxxx Built: 1986 - 1996 Offer number: 19321 Technical data: - Load capacity 1000 kg - Discharge approx. 4000 mm - Hoe height approx. 3300 mm - Swivel radius approx. 360° - Column diameter approx. 350 mm - Column height / bottom edge boom approx. 2300 mm - Height of the boom 360 mm - Total height approx. 3100 mm Hoist - chain hoist Make: DEMAG Type: DKUN 5 - 500 K Machine no: 61705602 Built:  ...
item-No.: 139075697
Steel - folding machine - Format: 78 x 120 - KC78 / 4KZR4 -FC - KC78 /4 KCR-P - FC 78 V - PS 66.2 - Pressing station - SBP 40 - with 8 pockets - with cross fracture - with right and left boom - with special access brochure shear-out-of-standing elbow boom - with counter - Machine in production until October
item-No.: 138933240
Format circular saw KÃ?LLE KFS 40 Max saw blade throughm. 400 mm Engine power approx. 5.5 KW Cutting width approx. 1000 mm, Circular saw height adjustment electric Circular saw swivel0-45 degrees with handwheel Upper protection Boom can be folded incl. WEGOMA 4-roller feeder Variomatic 4N incl tripod Speed - 2-18 m/min. infinitely variable Easy swivel and positioning with Memo-Lock system - After swivelling, for e.g. tool change, the feed locks back into the starting position. Easy and fast ...
item-No.: 138792074
-
5.800 €
country-de DE
- Extraction capacity: 6000 cbm/h - Pressure increase: 3000 Pa - Fan speed: 4970 rpm - Number of filter cartridges: 9 pieces - Degree of separation: 99.9% - Pipe air inlet: 315 NW - Pipe air outlet: 450 NW - Filter area: 90 sqm - Engine hours: 22198 h - Total power: 11 kW - Room requirements (W x D x H): 2.4 x 1.9 x 2.0 m - Condition: good, ready for use Details Low pressure central plant Accessories 4 suction arms diameter 150 mm at 6.0 m length (3 m boom + 3 m suction arm)
item-No.: 138792066
2 pieces boom 3 m 2 pieces of flexible suction arm 3 m Total length 6 m 1 piece flexible pipe with wall connection
item-No.: 138743772
-
ON Price
country-de DE
Workspace X 6200 Working area Y 1935 Workspace Z 225 Main motor kW 13.2 4. Axis C-axis Tool change points 22 Drilling spindles vertical 29 Edge gluing unit Separate Y-axis Machine table console table Self-equipping machine table Yes Software BIESSE BIESSEWORKS ADVANCED Machine control BIESSE BH 660 Hand terminal Yes BIESSE EPS Yes BIESSE ATS Yes Workpiece support aids Yes BIESSE BH 42 L Yes Chain changer Yes BIESSE UPI Yes automatic central lubrication Yes Number of milli ...
item-No.: 138658344
Schwerlastanhänger, Industrieanhänger, Plattformanhänger 5 Tonner Allradlenker Breite:150cm Höhe: 45cm Länge:300cm Guter Zustand voll funktionsfähig kann vor Ort besichtigt und ausprobiert werden. Versand auch ins Ausland. Besichtigung : Grundsätzlich möchte ich Sie darauf hinweisen, dass der Artikel, um Missverständnisse auszuschließen, gerne vor dem Kauf besichtigt und unter Strom getestet werden kann. Bitte stellen Sie Fragen vor dem Kauf um Unklarheiten zu vermeiden. Bei allgemeine ...
item-No.: 138658345
Heavy-duty trailers, industrial trailers, platform trailers 5 tonners All-wheel drive Width:150cm Height: 45cm Length:300cm Good condition fully functional can be visited on site and tried out. Shipping also abroad. Visit: Basically, I would like to point out to you that, in order to avoid misunderstandings, the article can be visited before purchase and tested under electricity. Please ask questions before purchasing to avoid ambiguity. In case of general questions or an appointment for a visit,  ...
item-No.: 138495074
Burning cutting machine boom Manufacturer: Messer Type: Corta KS Built in 1980 Optical control KS07A / PH19 Working range: 1.4 x 3 m 1 car-gene burner
item-No.: 138468706
6 x Rotaprint R 45 K with chain display - brown models 3 x Rotaprint R 40 AK with chain display - blue models 2 x Rotaprint R 37 K with chain display - brown models 1 x AB Dick type 350 N, DIN A 4 machine 1 x 2-color machine AB Dick type 9840, DIN A 3 machine 1 x Gestetner type 211 1 x Heidelberg TOK additionally 1 Rotaprint R 37 - defective 1 Rotaprint R 45 K disassembled (all parts available) Chain booms for Rotaprint machines R 40 AK, R 30 SK, R 37 K Also available: stapler, plates ...
item-No.: 137978134
Work platform bought in Germany, in Poland has not worked. Hydraulically extended to the height approx. 10 m. Ideal condition.
item-No.: 137907539
-
850 €
country-de DE
Suction arm Festo ASA2500 as wall swivel arm Swivel arm with supply unit and compressed air eccentric grinder Alutube approx. 1700 x 50mm flexible connection hose 50mm High supply unit from UK connection to UK boom approx. 1300mm Supply unit with 2 Schuko sockets and 5 compressed air connection, as well as pressure reducers and oilers almost new IAS2 connection unit IAS2 hose blue Grinder Festo LET 150-7 The attachment to the swivel unit was obviously shortened somewhat, see photos Very good condition f ...
item-No.: 137862431
BOBST GROUP TITAN SR8 SLITTER REWINDER PRODUCTION OPTIONS The Titan SR8 machine is built to cater for a wide range of flexible materials and to produce high quality finished product efficient, economically and with repeatability. MACHINE CONFIGURATION: 'FREE STANDING' (UNDER PLATFORM) MATERIAL/SUBSTATE SPECIFICATION Film: Plain, Printed, coated or metallized from 10 up to 200 micron. Laminates: Film/Film, Film/Foil, Film/Paper, Foil/Paper, Film/Foil/Paper Paper & Board: Paper 20 - 350gsm, board 180 - ...
item-No.: 137862432
BOBST GROUP TITAN SR8 SLITTER REWINDER PRODUCTION OPTIONS The Titan SR8 machine is built to cater for a wide range of flexible materials and to produce high quality finished product efficient, economically and with repeatability. MACHINE CONFIGURATION: 'FREE STANDING' (UNDER PLATFORM) MATERIAL/SUBSTATE SPECIFICATION Film: Plain, Printed, coated or metallized from 10 up to 200 micron. Laminates: Film/Film, Film/Foil, Film/Paper, Foil/Paper, Film/Foil/Paper Paper & Board: Paper 20 - 350gsm, board 1 ...
item-No.: 137862427
BOBST GROUP TITAN SR8 SLITTER REWINDER PRODUCTION OPTIONS The Titan SR8 machine is built to cater for a wide range of flexible materials and to produce high quality finished product efficiently, economically and with repeatability. MACHINE CONFIGURATION: 'FREE STANDING' (UNDER PLATFORM) MATERIAL/SUBSTATE SPECIFICATION Film: Plain, Printed, coated or metallized from 10 up to 200 micron. Laminates: Film/Film, Film/Foil, Film/Paper, Foil/Paper, Film/Foil/Paper Paper & Board: Paper 20 - 350g ...
item-No.: 137862428
BOBST GROUP TITAN SR8 SLITTER REWINDER PRODUCTION OPTIONS The Titan SR8 machine is built to cater for a wide range of flexible materials and to produce high quality finished product efficient, economically and with repeatability. MACHINE CONFIGURATION: 'FREE STANDING' (UNDER PLATFORM) MATERIAL/SUBSTATE SPECIFICATION Film: Plain, Printed, coated or metallized from 10 up to 200 micron. Laminates: Film/Film, Film/Foil, Film/Paper, Foil/Paper, Film/Foil/Paper Paper & Board: Paper 20 - 350gsm, board ...
item-No.: 137762471
-
5.200 €
country-de DE
Mobile workshop crane, counterweight small crane with battery-electric stroke Maximum load capacity 500kg Maximum hook height approx. 2740mm with approx. 1250mm discharge Including plate lifting pliers for 400kg load capacity The boom length is adjustable in 5 steps For permanent operation and not the simple hand-hydraulic version designed by the manufacturer for approx. 500 lifting movements. They can stand directly next to the load through the 3m cable remote control, and can thus perform very practical l ...
item-No.: 137724416
Used milling machine Int. Machine number m2831 Manufacturer Zimmermann Type FZ 4 Built in 1986 Total power 6.5 kW Ma. No. 107 Weight approx. 5,000 kg Max table load 1,500 kg Table size 1,400 mm x 800 mm Longitudinal feed 1,500 (1,480) mm Cross feed 900 (880) mm Discharge of the milling boom 1,000 mm Max workpiece diameter 2,900 mm Milling height (spindle nose/table surface) min. 30 mm / max. 1.180 mm Stroke milling head 250 mm Round table 360° With digital display Heidenhain Item location:  ...
item-No.: 137689707
-
8.500 €
country-pt PT
Toyota SAS20 Duplex Stacker A Gas Capacity: 2Ton 13,000 hours More information on photos In good state of sale conservation by bridge crane terms
item-No.: 137316751
-
750.000 €
country-nl NL
2014 HITACHI/SUMITOMO SCX2800-2 Lattice Tree Crawler Cranes CRAWLer CRANE Hitachi Sumitomo SCX2800 2014 FOR SALE HITACHI-SUMITOMO SCX2800-2 2014 year 275 ton Main Boom: 73 m Jib: 63.5 meter-Hook blocks: 250t, 145t, 13.5 t-Engine: Mitsubishi 6M70-TL Running time: 9000 hours Good condition
item-No.: 136624955
MAN Roland 304P HOB with MAN-Roland shed bow offshoot 4 printing plants sheet offset with turning device 4/0 or 2/2 Digital machine control via PECOM control center Series: 330 Machine number: 27735B Built: 1998 Start-up: January 1999 Number of printed presses: 27,078524 million (as of mid-May 2019) Operating time: 18731 hours Bow power: 15,000 sheets/hour â straight ahead and with twist Plate format: 605 x 740 mm Gummiwatch format: 730 x 750 mm (new print processing) Printing sheet format. 530  ...
item-No.: 136479761
-
BN 5.500 €
country-de DE
State: used Location: 25884 Viöl Dimensions: -Conveyor belt with feeding rest position (LxBxH): 4.6m x 1.2m x 1.1m -Length Main Ribbon 2.8m -Length feed 1.3m -Boom including scissor roller coaster resting position: (LxBxH): 4.0m x 0.8m x 0.8m -Scissor roller coaster: Roll diameter 40mm, reollecab 120mm, extendable at about 10m -Belt width: 600mm -Wheels: 200mm diameter, swivel with parking brake Belness type: PVC, 2-layer, non-slip, rough surface Weight: 1,700kg Contraction speed: 22m p ...
item-No.: 136444684
We want to sell all the equipment in a Finnish company called Domus producing mainly kitchen furniture and other furniture.There is equipment of the value of 900.000 €. The sale is done by an lawyers office in cooperation with a company called Lainvoima. Final agreement will be made by the lawyers office. A list of all the equipment will be sent to interested parties Some machines in the factory. Holz-Her saw with Grundner automatic storage facility Holzma cutting saw Homag basebord machine with Boomerang ...
item-No.: 136114469
Column turning crane Abus VS 457 Deconstructed condition Built: 2014 Operation suitable for hall Carrying capacity: 1000 kg Exoffload: 6000 mm Column diameter: 457 mm Swivel work: 50-4 Propulsion: Two-stage Swivel work: 680/2,680 quartermin Boom: 0.16/0.65 sellmin
item-No.: 135967841
Format circular saw FORMAT 4 kappa 400 x-motion BUSED, BJ. 2014 Main engine 7.35 KW Pre-splash 1.1 KW Cut height at 400 mm saw blade 135 mm Speed Turning Turning 2000 â 6000 UpM Cut width 1250 mm Sliding sled 3200 mm Machine with x-motion control All inputs and settings are made via the TFT display Various programs e.g. for cutting ships and grooves Main blade with 3-axis positioning unit Tirmet with 2-axis positioning iterite Cut angle and height el. Tadicable and programmable Paralle ...
item-No.: 134680145
Panhans 684 Circular sawing machines Panhans Panel saw 45° Sliding table 2600mm 45° swiveling Upper blade guard Boom and transverse stop short +-45° Paralleanschlag up to 1000mm Drive motor 5,5KW 50 Hz 400V 1970. Speeds: 3000-4000-6000-8000 U / 1 Saw blade diameter max: 400 mm G &-4014-O0952
item-No.: 134389812
-
7.400 €
country-de DE
Hebrock edge banding machine - fahrbar- Type Euro 2000 plus Year 2006 - top condition! Control Panel at eye level flush cut flush cut Surface scraper min. length of workpiece approx. 200 mm Max edge thickness 3 mm Temperature control adjustable Electr. 0-220 ° C Feed about 10 m / min. foldable boom front / rear GS-marking CE marking out. Equipment, hardly used Operating instructions, schematic checked
item-No.: 133998937
No. 04067 Baljer & Zembrod log yard / round timber sorting crane Consists of: -The length table Rail train B & Z OB / 30 V-LD 1994. Track width 3 m Length measurement HOLTEC Kapp chain saw Heated cabin Without rail Crane of Baljer & Zembrod OBX II 1994. With hook Boom of telescopic 4 - 15 m Payload 6500-1900 kg From Bavaria Available in the February 2019 Used machinery and equipment without further warranty. On technical data and year of manufacture warranty! Subject  ...
item-No.: 133825775
Technical data: -Drilling capacity in steel ST 60 32 mm -Drilling drilling 40 mm -Spindle mount MT 4 -Drilling spindle stroke 250 mm -Unloading min / max 250 / 1000 mm -Lift the boom 750 mm -min. / max - distance: - spindle - base plate approx. 270-1040 mm -worked base plate clamping surface B 1150-800 mm -Spindle speed 50-2800 RPM -6 feeds 0.05 - 0.31 m / U - spindle drive 400 V / 3.5 kW -Cube table - coolant system - space requirement approx. B 1050 x H 2610 / 340 x 1700 mm - weight approx.  ...
item-No.: 133337588
Electronically controlled milling and edges in glue, rework and drilling Centre to the Commission-wise production of furniture parts, Solid wood or similar materials. Prepared for einwechselbares gluing unit. BASE MACHINE: -Bed stable heavy-duty compact linear Guide system. Preloaded gear rack drives and Digital AC servo motors in the X - and Y-axes -Unit carrier with linear guiding system, Ball screw and Digital AC servo motor to the position of the Z axis, Travel 535 mm Clamping table at BAZ211/40/K  ...
item-No.: 133301621
Technical data: Seeding reframe: 3200 x 650 mm Sawing table dimensions: 1000 x 685 mm Schiebeschlittenabmessung (Lxw): 2600 x 360mm Format cuts: 3200 mm Max cutting height + 90 ° / + 46 ° / - 46°: 136 / 97 / 60 mm Max width of the lengths left by the saw blade: 2600 mm RIP fence cutting width: 1270 mm Blade rotation:-46° / +46° Max blade diameter: 400 mm Scoring sawblade (optional): 160 mm Main sawblade speed: 4000 min1 Power 400V / 50 Hz: 7,0 kW Dust extraction outlet diameter: 120 mm Dust nozzl ...
item-No.: 133037532
No. 04129 Fields K 975 saw BJ. 2004 Cutting length/Schiebetischlänge: 2800 mm Cutting width: 950 mm Boom: 1500 mm, with telescopic stop up to 2500 mm Electr. Height adjustment with digital display Electr. Angle adjustment with digital display Engine: 7,35 KW 3500-4500-5500 RPM Blade: 250-375 mm Cutting height: 125 mm Circular saw upper protection with Extractor hood, adjustable in width and height additional calendar. x-roll 1000 mm RIP fence the RIP fence on the sliding table is docked, the integrat ...
item-No.: 132960675
-
BN 500 €
country-de DE
Boom drill The boom length ca 1300mm Changes and errors in the technical data and information and subject to prior sale!
item-No.: 132779164
-
BN 4.890 €
country-ch CH
Mobile crane iron fairy Brithoist Mark II OPAL 2-axis Axle load to maximum 7.7 to total 15.4 Street-legal Speed 19.3 km / h L x W x H: 790 x 250 x 300 cm Built in 1972 3 to lifting capacity at maximum boom length maximum jib length 9 m The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 6 ...
item-No.: 132487190
Die Goldlift 14.70 ist die einzige Raupenbühne, die ermöglicht bis auf eine Höhe von 14m zu arbeiten. Mit ihren geringen Abmessungen und Raupenantrieb ist sie die perfekte Arbeitsbühne für alle schwerzugänglichen Einsatzorte und Untergründe bei der normale Bühnen versinken würden. Max. Arbeitshöhe: 14,00m Max. Bodenhöhe: 12,00m Max. seitlicher Arbeitsbereich: 7,00m Länge in Transportstellung: 3,975m Breite Raupenantrieb verstellbar: 0,78m - 1,08m Höhe in Transportstellung: 1,98m Arbeitskorb  ...
item-No.: 132487191
The Goldlift 14.70 tracked aerial platform is the only tracked platform that allows you to work up to a height of 14 m. With its small dimensions and Caterpillar drive is the perfect platform for all hard-to-reach places and surfaces at normal stage would sink. Max working height: 14, 00 m Max floor height: 12, 00 m Maximum lateral work area: 7, 00 m Length in transport position: 3,975 m Wide track drive adjustable: 0, 78 m - 1. 08 m Height in transport position: 1, 98 m Work basket (BxL): 0,694 x 1, 33  ...
item-No.: 132381954
-
1.000 €
country-de DE
Extraction arm Festo ASA2500 as wall swing arm Thank you, that you are interested in our offers. If you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail. Swivel arm with power supply unit and Druckluftexcenterschleifer Aluminium tube approx. 1700 x 50mm flexible connection hose 50 mm Height approx. 1300 mm power unit of UK port to UK boom Power supply unit with 2 Sockets and 5 compressed air connections, as well as pressure reducer and Oiler  ...
item-No.: 132026339
BOILER RADIAL DRILLING MACHINE COLLET BU 1600 - 02-06-011 Shipping time: immediately Number: 02-06-011 Manufacturer: Collet Type: BU 1600 MACHINE DATA Year built: approx 1980 L x W x h: approx. 3500 x 1200 x 3000 mm Weight: about 5000 kg Very good condition TECHNICAL DATA BOILER - RADIAL - DRILLING MACHINE Maximum drilling diameter in steel: approx. Ã? 52 mm Maximum drilling diameter in cast: approx. Ã? 60 mm Chuck: MK 5 Speed range: approx. 20-1000 rpm Throat depth: appro ...
item-No.: 131839126
-
3.800 €
country-pl PL
Hebezeug Genie: n nWysoko-20, 39 m n nWysoko max Plattform-18,39 m n nWysi?g Seite: 11, 05 m n nUd?wig-227 kg n nSzeroko Jack-2, 46 m n nWysoko Jack-2, 69m n nD?ugo Winde 8, 15 m n nPrze?wit-0, 41 m n nKo?a-, ausgeschäumte. n Nweight von: 11,231 kg n nPodno?nik beschädigt, unvollständig. n NET nCena. n nZapraszamy ausgeschrieben und zu prüfen, den Rest unserer Angebote n nDZIA? Vertrieb: Rafal; 500 393 620
item-No.: 131839125
-
3.800 €
country-pl PL
Trading and manufacturing company BGI Polska Sp. z o.o., based in Lesna (Poland, Lowersilesia near to Jelenia Gora) is offering you for sale: Basket lift: Working height-20,39 m Max platform height-18.39 m Outreach: 11, 05 m Lifting capacity-227 kg The width of the elevator- 2,46 m The height of the elevator- 2,69m The length of the elevator- 8,15 m Ground clearance-0, 41 m Wheels-off road, filled with foam. Weight: 11.231 kg. Elevator broken, incomplete. Gross price - 3 800 EURO Sales department ...
item-No.: 131590437
WALL JIB CRANE VETTER PW- 27-01-204 Shipping time: immediately Number: 27-01-204 Manufacturer: Cousin Type: PW MACHINE DATA Year of construction: approx. 2003 L x W x h: approx. 4000 x 500 x 800 mm Weight: CA. 400kg / 500 kg Very good condition TECHNICAL DATA - CRANE Throat depth: ca. 3800 mm Maximum load: 500 kg Connection: 16 amp Swivel range of the boom: 180 degrees ACCESSORIES â?¢ Chain hoist Other accessories on request Price and other specifications on request
item-No.: 129985841
Power supply 11.5 kW Exhaust fan with dust bag 3400 mm long with boom Depth with edges plate 1280 mm Weight 600 kg Edge thickness up to 5 mm Glue height 55 mm Feed speed 11 m / min Yoke caps 1 milling unit phase 2. milling unit RADIUS Compressed air supply 7 bar
item-No.: 129792270
Power 380V 17,5A 9, 5kW Quick heating pool Rotary frequency converter Caps saw unit 18000 RPM Flush trimming unit / rounding Dust nozzle 100 mm Weight approx. 550 kg Chassis Solid edges up to 5 mm Roll edges up to 3 mm Glue height of 50 mm Support rail Length 3100 mm boom
item-No.: 129605469
-
3.000 €
country-de DE
Arbeitsbühne MBB MM 18
item-No.: 129605468
item-No.: 129535059
-
7.200 €
country-de DE
Formteikantenanleimmaschine IMA PCA stating direct glue glue basin and strips the length unit A video of the current machine can be sent on request. Built no cheap edges moped, but industrial-grade by IMA for continuous use. This model was built by Brandt also referred to as KTD 82 H and KTD 820. For hot melt adhesives and PU adhesive, 140-220 ° c. Inner radii are dependent on the bending capacity of the edge material from approx. 150 mm, external RADIUS. Adjustable heater for heating of the material ...
item-No.: 129466796
<b>Properties:<b> The manufacturer's scarce discharger Drive: Pneumatic Condition: fully functional with traces of use Color: grey Material: Steel Expertly disassembled and packed Price per piece Total quantity in stock: 20 PCs. Condition: very good <b>Technical data:<b> Total width: 530 mm Height: 530mm Boom length: 630mm The Assembly traverse length: 430 mm Hub depth: 400 mm Wide pusher: 400 mm Tailor-made solutions for your intralogistics We are your c ...
item-No.: 128347216
-
4.500 €
country-de DE
Formteikantenanleimmaschine IMA PCA stating direct glue glue basin A video of the current machine can be sent on request. Built no cheap edges moped, but industrial-grade by IMA for continuous use. This model was built by Brandt also referred to as KTD 82 H and KTD 820. For hot melt adhesives and PU adhesive, 140-220 ° c. Inner radii are dependent on the bending capacity of the edge material from approx. 150 mm, external RADIUS. Adjustable heater for heating of the material of edges with narrow radii ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)