11498 results

similar results found in category other forklift trucks

item-No.: 143357064
1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling ...
item-No.: 143356675
1 piece used mobile containers - hot air heating Manufacturer: SAUTER Name: Hot air heating Type: OHL 120-HD Built: 1994 Power: 140 kW Heating medium: Heating oil Consumption: 13 kg/h max. Burner: ELCO econom 2000 / 2-stage Exhaust temperature: 150 °C NO2 emissions: 180 mg/cbm Carbon monoxide: 40 mg/cbm Carbon dioxide: 12.4% Efficiency: 94% Fan power: 11 kW at 2800 min -1 Noise level: 85 dBA, 1 m away from the fan Voltage: 3 x 400 V, 50 Hz Working temperature: 130 °C Air inlet te ...
item-No.: 143356664
Ready for useage a Lefort City 80T machine. This machine is excelent to shearing profiles. The machine has no any box. This machine use rolls, which means the potential lenght of the materials could be 6m to, because the lenght is unlimited. The "box section" is 400x400mm which means you can recycling every profilr with this machine. The cutting force 80Tons. The machine condition is refurbished by the factory.
item-No.: 143356662
Lefort BR1260 Shredder for sale. The machine has 10 hammers, 500 Hp electric engine. The machine has a low hours (less than 2.500). THe machine's capacity is around 20-25 tons/hours which means this is an exelent machine. Price is including the separation and conveyor system to, which is including the followings. -Feeding conveyor (1260 mm wide) -Vibrating table -magnet drum (type:BMK 100-180TML ) -1 conveyor for metal scrap with cabin for separation -1 big conveyor for nonferrous and other materials Bbmc3f ...
item-No.: 143356661
Huron EX-C 5-axis machine machining center 5-Axis machine center vertical Type: EX-C 20 Control Unit: Siemens 840D Model: 1998 Spindle renewed/Spindle renewed in 2018 Chip conveyor/Chip conveyor new 2016 Displacement paths X Longitudinal displacement 1600mm Y Transverse shift 700mm Z Vertical displacement 800mm Spindle Plug-in cone HSK63-A Tool clamping force 18,000N Maximum power 25kW Spindle speed 100-14,000 kW Maximum moment 256mN Characteristic speed 1,000rpm Head Type C Working axis  ...
item-No.: 143356656
Ready for purchase a refurbished Lefort PC 400. Closed box size is 400X400X3000 mm. This machine is an excelent solution for a non-ferrours metals. The machine has a shear head, which means this machine can cut with 200 tons. You will find 2 video. The cutting video has been made from this machine.
item-No.: 143356637
-
580 €
country-de DE
2 different types available: Indramat TRM3-W22-W0/510 or TRM3-W23-W0/549 3 Pulse Thyristor control amplifier, used, good condition, 100% functional, can be used for DC motor MDC8.10, MDC9.30, MDC8.30 or others. Price per piece.
item-No.: 143356628
One used BIHLER RM35 multislide wire/strip punching and forming machine, year of mfg 1973. Equipped with 5x forming slides and 7 ton press station, single gripper feed on right-hand side with straightener. Air clutch. Max width of strip 32 mm. Max wire diameter 3 mm. Standard feed length 170 mm. Max operating speed 250 strokes per minute. Weight approx 2000 kgs.
item-No.: 143356623
-
ON Price
country-de DE
Ruchser glazing table for sale Condition good
item-No.: 143356610
-
ON Price
country-de DE
We sell a corner cleaning machine ROTOX EPA 374 Condition very good
item-No.: 143356608
-
ON Price
country-de DE
We sell a Haffner GL 172 glass strip saw Condition: used well
item-No.: 143356594
-
ON Price
country-de DE
We sell a blade cutter Very good condition
item-No.: 143356590
-
ON Price
country-de DE
Number of spaces: 3, max. operating temperature: 150°C, max. working pressure: 12bar, capacity space 1/ 2/ 3: 18.3/ 1.9/ 1.4l, length: 2100mm, width: 1000mm, height: 1600mm, weight: 1.02t.
item-No.: 143356587
item-No.: 143356588
-
ON Price
country-de DE
Operating temperature: 200°C, connected load: 40kW.
item-No.: 143356579
-
ON Price
country-de DE
A double welding head welding machine condition is sold: very good
item-No.: 143356580
-
ON Price
country-de DE
Volume flow: 3240l/min, pressure: 10bar, connected load: 22kW.
item-No.: 143356539
-
1.565 €
country-de DE
KDA3.2-100-3-A00-W1 (without board for external encoder) or KDA3.2-100-3-A01-W (with board for external encoder) Servo Power Unit Spindle Drive Device AC milling spindle drive device, among others for motor 2AD132B Weight: 19kg
item-No.: 143356507
- Table size: 450 x 300 mm - Planing width: 500 mm - Machine weight: 1000 kg - Room requirements (W x D x H): 1.6 x 1.0 x 1.5 m - Condition: very good Details well-maintained machine, barely running
item-No.: 143355780
- High-pressure pump: 25 bar - Tank capacity: 775 l - Total power: 3 kW - Machine Weight: 340 kg - Room requirements (W x D x H): 1.5 x 1.0 x 1.5 m - Condition: very good Details Paper tape with sensor for "paper used up" Fine filter with sensor for contamination
item-No.: 143355776
Product Details Reference ID PP0238PP Manufacturer NANJIANG Model WFD-400 High Speed Automatic Paper Food Bag Machine 2015 Year Built Speed 100-300pcs/min Location Europe Product Description This machine is built to make paper rolls or printed-paper rolls into flat & satchel bags for packing fast food like bread, loaf, KFC. Paper Baguette bags. It is equipped with CRT for easy operation; with photocell for make the same printed paper bags. The bags can be many different dimensions. â?&c ...
item-No.: 143354145
We offer a Planmed mammography device Sophie with the following system components: Tube Toshiba E 7272 0.1/0.3 Bucky 18x24 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service ...
item-No.: 143354127
-
600 €
country-it IT
For sale exclusively on 06 December 2019 at 10-30 in Cazzago San Martino, Bs Brand: Fiat Model: Doblo' JTD Year: 2004 Km: 262,426 License plate: CM784NW Setup: Isothermic van Fuel: Diesel Displacement: 1910 CV: 104 Change: Mechanical Range: 435 kg Euro: 3 Accessories: Type: fridge van Fridge Data: Frigiline V12 DESCRIPTION AND/OR FEATURES : Key No. 1 For more information and vision, please contact us at 39 307751645 Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2 p.m. to 6 p.m. The view of  ...
item-No.: 143353890
Product number: 1604 Type: MI-401-9 Serial number: 9211 003.0033 Year of construction: 1992 Needles: 95 pieces Diameter needles: 4 mm Belt: 400 mm Product height: max 200 mm Pneumatics: 6 Bar Power: 3 x 380V, 50Hz, 8.5kW Dimensions: 1800 x 1000 x 1800 mm For boneless and bone-in products
item-No.: 143353886
Product number: 1602 Type: Sealpac 350 Serial number: TVG015801 Year of construction: 1997 Dye: 9255, 1/2 gastro Pneumatics: 8 bar Capacity: max. 15 strokes/min Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 2950 x 900 x 1780 mm Weight: 450 kg
item-No.: 143353883
We offer a GE senographer 800 T with the following equipment components: Tube GS 512-4 0.1/0.3_DOM 2005 Bucky 18x24 and 24x30 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not serv ...
item-No.: 143353881
We offer a GE senographer 800 T with the following system components: Tube GS 512-4 0.1/0.3_DOM 2014 Bucky 18x24 and 24x30 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not servic ...
item-No.: 143353868
We offer a Philips X-ray machine Diagnostic TH with the following system components: Generator Optimus 50 Tube SRO 2550 0.6/1.0 (ceiling-hanging) Vertical stand Diagnostic VE • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • W ...
item-No.: 143353864
We offer a Siemens X-ray machine Mulitx CPH with the following system components: Generator Polymat 70 Tube Dunlee SV 150/40/80 C 0.6/1.0_Bj. 2004 Vertical stand Vertix 2E • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We a ...
item-No.: 143353860
We offer a Siemens X-ray machine with the following system components: ~ Generator Polydoros LX 50 ~ Tube Opti 150/30/50 HC 0.6/1.0_DOM 06/2015 (ceiling-hanging) ~ Vertical stand Vertix TOP • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and pre ...
item-No.: 143353858
offer consists of: Horizon jogger PJ-100 Technical details: - sheet size max. 297 x 420 mm (11"x17") min. 128 x 182 mm (5"x7.2") - pile height: 95 mm (3.7") - dimensions: 489 x 458 x 1135 (19.3”x18.1”x 44.7”) - weight: 55 kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs
item-No.: 143353856
-
2.250 €
country-de DE
Used metal band saw Internal machine number: m2897 Manufacturer MÃ?SSNER Type Record SFF/420 Masch. No. 27518 Built in 1970 Roll diameter 420 mm Discharge in width 410 mm Discharge at height 295 mm Table size 600 x 600 mm Belt speed 12-375 m/min. 8 steps Saw band length min/max. 3160 / 3260 mm Weight approx. 580 kg Table tiltable and swivelling With IDEAL tape welding machine The receipts of the impellers should be renewed if necessary. Location 58730 Fröndenberg/Ruhr The article  ...
item-No.: 143336456
Operating and consumption data: Product: Apple juice Water evaporation 31,550 kg/h Inlet: Quantity 36,000 kg/h Concentration approx.8.9 °Brix Temperature 10-20 °C Pre-concentrate for embellishment: Quantity approx.16,000 kg/h Concentration approx.20 °Brix Temperature approx. 50 °C Expiration: Quantity 4,450 kg/h Concentration 70-72 °Brix Temperature 55 °C after cooling 10-15 °C Aroma: Quantity (!:150)ca 240 l/h Temperature approx. 4 °C Steam consumption (5.5 bar ) for preheatin ...
item-No.: 143336385
new
448 €
country-at AT
Pro-face AGP 3302-B1-D24, Digital Electronics, Ex, neu, original packed Manufacturer: Digital Electronics Type: AGP 3302-B1-D24 Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging ...
item-No.: 143318979
-
BN 100 €
country-de DE
Plug-in heat bridge made entirely of stainless steel - Manufacturer: Neumärker - Model: 50554 - 2 heating zones can be controlled individually. - External dimensions (WxDxH): 1000x300x450 mm - Connection value: 1kW/ 230V/ 50Hz
item-No.: 143318967
-
12.500 €
country-de DE
Forklifts, electric forklifts Clark CEM35 with only 2055 hours and side slider Lifting load 4000kg to 3150mm HH and 500mm load centre Lifting height approx. 3150mm, duplex mast Side slider manufacturer Cascade, side stroke 200mm 3 Hydraulic control valve Fork length 2000mm Tine dimension 120 x 50 x 2000mm, the tines can be completely pushed together and a maximum of 1150 out of each other Battery Hoppecke 80V/700AH from Y.O.M. 08/2000 with aquamatics external battery disconnector Steering wheel adjustab ...
item-No.: 143318349
-
1.450 €
country-de DE
2 different types available: Precise KT4010-10 / PCA2-1015-10: 3 x 0 - 460 V, 0 - 4000 Hz, rated current 10 A, peak current 15 A, L x W x H: 557 mm [21.9" ] x 221.5 mm [9"] x 262 mm [10.3"] Weight: 29 kg [64 lb] Precise PCA2 frequency inverters are digital frequency inverters with variable speed. Specially designed PAM (Pulse amplitude modulated) Technology and IGBT blocks create a sinusoidal waveform that greatly reduces the subharmonic vibrations that are normally present in other drives. This cleaner wavefo ...
item-No.: 143318347
Sawmill completely used, Y.O.M. ca 92-96. Ready for screening, inspection by appointment. Roundwood sorting trolley B&Z - Diesel, root reducer B&Z with remote control, roundwood task, gate Esterer HDE-SV 710 mm with remote controlled clamping trolley with cross-cut saw and mechanization, double hem perider WD FR97L with spreis slacker autom. Feed, re-cutting gate Esterer DK90T1. P 2 stalk variable with longitudinal sorting 1-5 m, Hacker Holzmatic with metal detector and vibropine, Complete disposal syste ...
item-No.: 143318345
Total length is 21 m, the width is 2.4 m, Inside 2.2 m, stacking size 17.5 x 1.25 m, Bfeubzjct0 Connection value (heating)KW 36,heating medium electricity/heat pump, Connection value (current)KW 70, Average consumption KW/h 15, Operating voltage 3 x 380 V / 50 Hz
item-No.: 143318312
Only about 800 work cycles 1-pliers Book block length from 100 - 340 mm Book block thickness 1 - 40 mm Milling device Paper dust extraction PUR (cartridge system 300 ml) Side gluing manual envelope feeder Immediately available, hardly used (absolutely as good as new) !
item-No.: 143318310
The machine can be used as a packaging machine in many different ways. With feed belt, on which the products are set up manually or automatically. The most suitable products (according to manufacturer's specifications) for the application are, among other things, advertising inserts, boxes, cans, bottles, magazines, individual products and multipacks in general, etc. - with feeding belt - Welding station - Shrink tunnel Speed: 12-35cycles/min. Pack dimensions: Length: 80 - 690 mm Width: 80 - 350 mm  ...
item-No.: 143318306
General Project No.: 905126 Number: 1 pc. Manufacturer: PFIFFNER Type: HW 20/10 Control: Siemens Built: 2006 Condition: Used machine Layers approx.: 2-3 layered Description OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Conveyor Automatic edge gap filter Loading from coil GENERAL TECHNICAL DATA Machine dimensions (LxWxH) approx. 8900x3300x29000 mm Machine weight approx. 3500 kg Comment The machine is equipped exclusively with hydraulic units. There ...
item-No.: 143318304
General Project No.: 905142 Number: 1 pc. Manufacturer: HURCO Type: VMX 30 Ui Control: WinMax Built: 2014 Condition: Used machine Machine approx. (hrs): 14.120 Layers approx.: 1 layered Description Milling 5 axes Travel in X 760 mm Travel in Y 510 mm Travel in Z 520 mm Direct displacement system X/Y/Z/A/C Tool holder SK 40 Max speed milling spindle 12000 rpm Max power at ED 10-40/100% 13.4 kW Maximum torque at ED 10-40/100% 215 Nm Tool magazine 24 stations Max tool diameter 80 mm Max. ...
item-No.: 143318301
ALLGEMEIN Projekt Nr.: 905128 Anzahl: 1 Stk. Hersteller: BROTHER Typ: TC-32BN QT Steuerung: Brother Baujahr: 2006 Erhaltungszustand: Gebrauchtmaschine Maschine ein ca. (Std.): 27.590 Spindel ein ca. (Std.): 12.140 BESCHREIBUNG FRÄSEN Verfahrweg in X 550 mm Verfahrweg in Y 400 mm Verfahrweg in Z 415 mm Max. Eilganggeschwindigkeit in X/Y/Z 70/70/70 m/min Werkzeugaufnahme BT 30 Max. Drehzahl Frässpindel 12000 1/min Max. Leistung bei ED 10-40/100% 11 kW Kettenwerkzeugmagazin 40 Stationen M ...
item-No.: 143318302
General Project No.: 905128 Number: 1 pc. Manufacturer: BROTHER Type: TC-32BN QT Control: Brother Built: 2006 Condition: Used machine Machine approx. (hrs): 27.590 Spindle approx. (hrs): 12,140 Description Milling Travel in X 550 mm Travel in Y 400 mm Travel in Z 415 mm Max speed in X/Y/Z 70/70/70 m/min Tool holder BT 30 Max speed milling spindle 12000 rpm Max power at ED 10-40/100% 11 kW Chain tool magazine 40 stations Max tool diameter 55 mm Max tool length 200 mm Rotary pallet chang ...
item-No.: 143318300
General Project No.: 905127 Number: 1 pc. Manufacturer: DECKEL MAHO Type: DMU 70 eVolution Control: Heidenhain iTNC 530 Built: 2004 Condition: Used machine Machine approx. (hrs): 57,500 Spindle approx. (hrs): 27,800 Description Milling 5 axes Travel in X 750 mm Travel in Y 600 mm Travel in Z 520 mm Max speed in X/Y/Z 50/50/50 m/min Tool holder SK 40 Max speed milling spindle 18000 rpm Max power at ED 10-40/100% 35/25 kW Chain tool magazine 2x16 stations Swivel round table Swivel unit N ...
item-No.: 143301331
<b>Features:</b> Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged Color: Blue Price per piece <b>Technical data: Manufacturer: Budde Type: TGF 02 with hydraulic height adjustment Condition: Good (used) Colour: blue Built: 2006 Total length (retracted): 5,000mm Total length (extended): 11,500mm Total width: 1,240mm incl. control cabinet Total width: 990mm Belt width: 6 ...
item-No.: 143300509
-
160 €
country-de DE
<b>Features:</b> Used roller conveyor Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged <b>Technical data:<b> </b> Dimensions of the roller conveyor</b> Total width approx.: 900mm Total length: 6,000mm Segment length: 3,000mm Conveyor width: 830 mm <b>Details of the role</b> Roll diameter 50 mm Axis distance ...
item-No.: 143300507
<b>Features:</b> Used scissor roller web Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged <b>Technical data:<b> </b> Dimensions of the scissor roller web</b> Manufacturer: Gura Condition: Good (used) Total length approx. extended: 10,000 mm Total length approx. retracted: 3,800 mm Total width: 650mm Roll width: 565mm Sup ...
item-No.: 143295908
We are pleased to offer: 2005 Horizon VAC 100A/C 10 station towers with rear jogger Serial number 071039 070515 1st Station VAC 100A ten station suction collator with touch screen 2nd Station VAC 100C ten station suction collator PJ-77R jogger These towers can either collate or can be added to a Horizon SPF20A or 200A or Stitcher 5500. Good working condition Inspection possible. Available immediately Located in the Uk
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)