14932 results

similar results found in category small trucks and vans/box-vans

item-No.: 134626951
-
BN 6.000 €
country-de DE
Pick- and -placement machine (Assembly of printed circuit boards with appropriate small components) including 8 Flexfeeder Dimensions: length 2440 mm height (not including monitors) 1410 mm wide 1090 mm Net weight: 600 kg Beq3nrylin Application: Assembly of printed circuit boards with various small parts Special features: The Flexfeeder are included Documentation (technically how professionally): all documents are available Visit by appointment
item-No.: 134608353
-
BN 30.000 €
country-bg BG
Designed to meet all metals analysis requirements form routine use to metals research, the ARL 4460 is the solution for ultimate analytical performance in varying laboratory conditions or in hostile environments. Ultimate detection limits, reproducibility and accuracy Speed, accuracy, stability, reliability Widest range of metals analysis Capability to identify and count inclusions and to calculate cleanness indexes The ultimate in performance for spark emission metals analysis to allow rapid, reliable quality ...
item-No.: 134608214
-
5.000 €
country-bg BG
The Mitutoyo HV-112 Series 810, 810-163A Vickers Hardness Testing Machine has a wide range of test forces available. Test forces from 1.961N to 490.3N (2kgf-50kgf)and they measure a variety of specimens. The load duration can be set in 1 second increments between 5 and 99 seconds. The minimum reading of indentation is 0.1um. It allows small indentations to be measured with high precision. This machine is new. Never used. Showroom exponent. Net price. Price like new 22 000 USD. Available HV 112 and HV 114 models.
item-No.: 134608207
-
BN 5.000 €
country-bg BG
Marking laser Mega-Light V40 from Schilling Marking Systems Laser marking at the highest level with our Mega-Light laser technology All the advantages of the Mega-Light V40 diode marking laser at a glance: - Permanent laser marking of metals, plastics and other materials - 10W output - Corrosion-free laser marking - Small dimensions, lightweight, saves space - Mark with light flexibly, contact-free, professionally and easily - Pump module separated from resonator, therefore unlimited opportunities for int ...
item-No.: 134608168
Used cutting rolls system with hand job cleaned incl. 120 yellow tipping boxes 60x40cm incl. 1 large and 1 small print Board,. 5 new Kipptrögel, 15 felt cloths
item-No.: 134499962
-
59.500 €
country-at AT
autom. Kleinteilelager für Euro-Fix-Kästen (600x400), inkl. Fördertechnik, Kommissionierplätze und Ersatzteillager, 15.552 Stellplätze - gebraucht - : Preis ab Standort: 59.500.-€ (netto) zzgl. Montagen etc. Hersteller: TGW, A-4600 Wels Typ: AKL Baujahr: ca. 2005 Fachlast: 2 x 50kg Das Kleinteilelager hat 15.552 Stellplätze Anzahl Gassen: 2 Gassen (doppeltiefe Lagerung). Im Einsatz sind Schäfer Kästen mit einer Grundfläche von 400mm x 600mm und einer Höhe von 120 bzw. 320mm. Anlagenmaße: ...
item-No.: 134499963
-
59.500 €
country-at AT
Autom. Small parts storage used for Euro fixed boxes (600 x 400), incl. conveyor, picking stations and spare parts warehouse, 15.552 pitches â -: Price from site: â?¬59.500.-(net) plus montages etc.! Manufacturer: TGW, A-4600 WELS Type: AKL Construction year: CA 2005 Load capacity: 2 x 50 kg The small parts warehouse has 15.552 pitches Number of lanes: 2 lanes (double-deep storage). Saeed boxes with a surface area of 400 mm x 600 mm and a height of 120 or 320 mm are used. Size: Street ...
item-No.: 134491043
-
480 €
country-de DE
Year: circa 1975 Schleifscheibendurchm.: 200 mm Grinding wheel speed: 2800 RPM Total power: 0.55 KW / 380 V Machine weight: 250 kg Equipment / Accessories: Machine stand Coolant system Device for grinding of small parts All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Anyone can test the Doppelschleifbock advance under power.
item-No.: 134415476
TECHNICAL DATA: Work area: 4,000 x 2,000 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 15 mm Maximum sheet thickness ALU: 10 mm STANDARD EQUIPMENT: -Closed machine frame with integrated laser system - laser unit: CO2 laser TLF 2000, high frequency angeregt, reflecting telescope, cooling unit - automatic pallet changer and longitudinal conveyor belt - drives: maintenance-free three-phase servomotors  ...
item-No.: 134415466
TECHNICAL DATA: Working area 6.000 x 2.000 x 115 mm Control Siemens Sinumerik 840 D Laser power 6,000 watts Maximum sheet thickness mild steel 25 mm Maximum sheet thickness stainless steel 25 mm Maximum sheet thickness aluminium 15 mm STANDARD EQUIPMENT: -Closed machine frame with integrated laser unit -TRUMPF laser TLF 5000 -Laser unit: CO2 laser, high-frequency unit, logbook function angeregt, -Automatic pallet changer and longitudinal conveyor belt -Drives: Gantry drive in combination with dire ...
item-No.: 134415458
TECHNICAL DATA: Work area 3.000 x 1.500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Maximum sheet thickness mild steel 25 mm Maximum sheet thickness stainless steel 20 mm Maximum sheet thickness ALU 12 mm STANDARD EQUIPMENT: -Closed machine frame with integrated laser unit -TRUMPF laser TLF 5000 -Laser unit: CO2 laser, high-frequency unit, logbook function angeregt, -Automatic pallet changer and longitudinal conveyor belt -Drives: Gantry drive in combination with direct linear ...
item-No.: 134379957
-
ON Price
country-nl NL
Baader 605 soft separator Superb condition Baader 605. Ideal machine to process/separate many types of poultry, meat, vegetable and fish products. This machine is delivered with a 1.3mm and 3mm. drum making it capable of processing a wide variety of products. This particular machine has a ‘pusher system’ installed to help ‘push/press’ products into the very squeeze of the machine. This pusher system prevents products blocking the whole production which could lead to a pause in production. The machine has  ...
item-No.: 134342906
-
ON Price
country-pl PL
Salmon filleting machine In very good condition carnitech 2630 salmon filleting machine. This machine is capable of processing up to 20 salmons per minute ranging from approx. 1 to 7 kg. The 2630 works with 2 circular knives and 2 round blades for an optimal yield. A deheaded salmon is placed with belly-up into the infeed belts of the machine. The infeed transport belts move the salmon to the cutting part, where the band knives automatically adjust to the size and shape of the fish. The circular knives cut a ...
item-No.: 134342855
We are pleased to offer: Atlas Blumer D-18 Label Punch 1985. Serial Number: 4032184 This manually loadable machine is known for its top precision, User-friendliness, optimum safety and nevertheless maximum performance. Thanks to its compact and stable design, The D-18 is not only the ideal machine for labels and card producers, Which have a small to medium quantity range, but also for printers. Who have to efficiently and accurately bring its pre-cut paper or plastic products. in shape” accordin ...
item-No.: 134342788
Year of construction: 2005 Hours of operation machine: 11.796 h (05.04.2019) Pressing force approx.: 1700 kN Bending length approx.: 4250 mm Control: TASC 6000 Working height approx.: 1050 mm Free stand round about: 3680 mm Usable height approx.: 615 mm Space requirements: 5240 x 1865 x 3000 mm Approximate weight machine: 16,000 kg Total connected load approx.: 26 kVA · Runtime hydraulic one: 2.416 h (State: 05.04.2019) · A runtime compression beams: 448 h (State: 05.04.201 ...
item-No.: 134307279
Dowel-hinge drill Center Blum PRO Centre 2000 Part No.: M65. 2000, Machinenr.: AC139, year: 1995, moveable base with left - and right-sided folding rollers plate and Base cabinet with 3 PCs. shop and various small accessories
item-No.: 134225326
-
148.000 €
country-de DE
A 3 111 APV cheese making plant, Line B existing about: B 1.) 2 equal constructed APV Cheese making plant with 20.00o l for each one B 2.) 1 APV pre-pressing bath with a distribution vehicle for the cheese curd B 3.) 1 Gada ready pressing plant No. 2 with cheese block inlet- and cheese block outlet technique Measurements for the place of 2 cheese making plants Distance form the wall behind the cheese making machine is 7,45 m, length of the stage for the cheese wo ...
item-No.: 134225324
-
128.000 €
country-de DE
A 3 110 Gardan cheese making plant for yellow cheese, Line A existing about A1.) 3 equal constructed Gadan Cheese making plants with 16.000l for each one A2.) 1 Gadan pre-pressing bath with a distribution vehicle fort he cheese curd A3.) 1 Gadan ready pressing plant No. 1 with cheese block inlet- and cheese block outlet technique Measurements for the 3 cheese making plants: Distance from the wall behind the cheese making machine is 7,45 m, length of the stage for the 3 cheeese making plants is  ...
item-No.: 134193831
Technical data -Manufacturer of Poli Italy / conversion of WENCESLAS Metromec technology -Type SKY 5 / CNC -Year of manufacture 1995 / measuring range -X axis: 700mm -Y axis: 1000mm -Z axis: 500mm Table surface -about 1100x1740mm Key system -Renishaw PH 6 / TP 20 -Small parts Measuring computer / controller / software -Control Panel Wenzel -Control / controller Wenzel WPC 2010 -Software METROMEC -Calibration ball
item-No.: 134193742
3 MONTHS LA POSTPRESS WARRANTY Excluding electronics Comprising: Horizon HT-30 Three cutters -Use: solo (offline) -Technology: Touch & work -Operation: stacks and cuts up to 10 copies at the same time and automatically -Cutting: knife works in two directions-> damage-free cuts -Storage: stack tray of sliced products -Order memory: 40 memory locations for repeat orders -Device: exact adjustment via touch screen -Construction: durable -Space: low -Edition number: small and medium runs ...
item-No.: 134128478
Driving power: 1,1 / 1,5 KW 400V / 50 Hz Total connected load: 3.4 kVA belt speed: 40 / 80 m / min Band saw blade dimensions: 2910 x 27 x 0.9 mm Smallest diameter: 5 mm Length of remaining piece: car. 160mm / man. 20 mm Material support height: 760 mm Dimension: 1810 x 1790 x 1200 mm Weight: 565 kg
item-No.: 134128477
Driving power: 1,1 / 1,5 KW 400V / 50 Hz Total connected load: 3.4 kVA belt speed: 40 / 80 m/min Band saw blade dimensions: 2910 x 27 x 0.9 mm Smallest diameter: 5 mm Length of remaining piece: auto. 160mm/man. 20 mm Material support height: 760 mm Dimensions: 1810 x 1790 x 1200 mm Weight: 565 kg
item-No.: 134128362
SHARPENING MACHINE VOLLMER CNE- 21-06-004 Shipping time: immediately Number: 21-06-004 Manufacturer: Vollmer Type: CNE MACHINE DATA Year of construction: approx. 1991 L x W x h: approx. 600 x 600 x 1800 mm Weight: 200 kg Very good condition TECHNICAL DATA Loop scope: Largest tooth pitch: approx. 60 mm Smallest pitch: 5 mm Grinding angle: Rake angle: approx.-10 to 30 degrees Inclined cut: about 6-20 degrees Grinding wheel dimensions: approx. Ã? 200 x 20 mm ACCESSORIES &acir ...
item-No.: 134123013
Max from 915 mm, min. 45 mm, longitudinal seam, folding floor, double edge, electronic top glue piece with 2 applicator heads, washers under Glue factory left, investors with vibrator & blow nozzle, primary crusher, right and left, kicker, counter, digital position indicators, motorized Folding floor station, motorized upper middle station in folding small box, switched mode press band. Revision 2019: cleaned, tested, painted and equipped with new investors and conveyor belts, new main drive motor with frequenc ...
item-No.: 134118249
Bipel 12 ton preformer This horizontal preformer was used to preform phenolic material. Ideal for small plastic moulding facilities.
item-No.: 134087758
PET Compressor Atelier Francois CE68A 35 m3/h This three stage intercooled high pressure compressor was build in year 2005 and it is till installed but operation was stopped in year 2014. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position to optimize ...
item-No.: 134087750
Air Compressor 40 bar Atelier Francois CE68A 35 m3/h This three-stage intercooled high pressure air compressor was built in year 2005 and it is till installed but operation was stopped in year 2014. This compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. There is no piston rod packing on 3rd stage, which eliminate sealing against 40bar. Single acting 2nd and 3rd stage, requiring few valves. Smaller 2nd and 3rd stages are horizontal position t ...
item-No.: 134051318
-
29.000 €
country-fr FR
M Machine type machining center - horizontal brand MAZAK type FH 4800 year 2001 control type CNC storage France country of origin Japan delivery immediately cargo base stock technical details x way 560 mm y way 630 mm z-way 600 mm control FUSION 640 M workpiece diameter 630 mm distance horizontal spindle / table min. 80 / 710 mm of maximum table load of 400 kg number of pallets 2 pallet size 400 x 400 mm B - axis 0.001 ° speed 35 ~ 12,000 rpm Drive power - spindle motor 30 / 22 kW bearing diameter 80 mm pal ...
item-No.: 133896772
-
ON Price
country-de DE
with multiple separation plates for 30 small teigeinheiten///Power:0.75kW///Hauptvoltage:400
item-No.: 133896495
Cooling Tower 1410 kW EVAPCO Model-AT-215-59 This evaporative cooling station EVAPKO was made in 2011 year by EVAPCO Company. It has two fans for water cooler and it is designed to operate together with YORK GRAM ammonia station, cooling the entire York Compressor station equipment. Equipment is in perfect working condition and still installed on the roof of the building. Have all needed certificates and ISO document’s. Short description and working principals: Warm water from the heat source is pumpe ...
item-No.: 133860989
We offer used, as it is GEA Finnah yoghurt cup making, filling and sealing machine, Cups/cycle: 24 = 4x6 in running direction, 6x4er sets per cycle = Foursome cups together sealed Capacity: 25, 28, 30 und ggf. 32 cyles/minute = up to 43.000 cups/h. Cups formats, big cup 125 g, small cup 65 g Manufacturing year 1996, changed to aseptic staus system in 2012 Prior sales reserved
item-No.: 133860785
Ref. 10934 Gatherer stitcher Heidelberg ST 400 built in 2005 cover feeder (UFA), 5 vertical drum feeders,(TAL) 2 horizontal drum feeders(TAL), 10 chain substructures with knife , conveyor table with reject gate, picture recognition system, 4 stitching heads Hohner SB 50-N, 4 eyeletting heads SB 55/R L6, staple control from below, missing-sheet belt delivery with interval control, small-format device for TAL/TAS, waste delivery BUSCH, stacker RIMA - 1012A
item-No.: 133860786
-
ON Price
country-de DE
REF. 10934 Gatherer stitcher Heidelberg ST 400 built in 2005 cover feeder (UFA), 5 vertical drum feeders,(TAL) 2 horizontal drum feeders(TAL), 10 chain substructures with knife,. sonderanlagen table with reject gate, picture recognition system,. 4 stitching heads Hohner SB 50-N, 4 eyeletting heads SB 55/R L6,. batch control from below. missing-sheet belt delivery with interval control small-format device for Valley/TAS, waste delivery BUSCH, stacker RIMA - 1012A
item-No.: 133860547
1 piece reconditioned fresh concrete recycler brand Stetter manufactory: Stetter type: RA 12 YOC: 2001 reconditioned 2018/2019 1 piece System washing drum - washing capacity 12 m³/h - power 110 kW - separations cut 0,25 mm - water capacity in the drum 2,0 m³ - power washing drum 2 x 3 kW - overal dimensions basic system 5700x3200x2700 mm 1 piece feed hopper – used - high of the feed hopper 1,53 m The complete plant is already checked and reconditioned. That means: - new wheels -  ...
item-No.: 133790635
Laser cutting machine Manufacturer: TRUMPF Type: TRUMATIC L 3050 Year of construction: 2006 Control: Siemens Sinumerik 840 D Hours of operation: 40.628 h / 19.636 h Laser power: 5000 Watt Work area: 3000 x 1500 x 115 mm Maximum sheet thickness/St: 25 mm Maximum sheet thickness/VA: 20 mm Maximum sheet thickness/al: 12 mm Maximum speed: 200 / 300 m / min. Length: 11100 mm Width: 4600 mm Height: 4600 mm Accuracy: +/-0.1 mm Weight: 12000 kg Closed machine frame with integrated laser unit Laser uni ...
item-No.: 133753381
TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC se ...
item-No.: 133752842
TOS Machine Name Surface Grinding Machines Manufacturer TOS Model BPH 300 Location Mumbai Year Of Manufacturing NA Technical Specification Table Size 300x1000 mm The largest grinding width 300 mm Maximum height of workpiece 350 mm The largest table load 280 kp ( 2745 N ) Grinding wheel diameter: x width x bore 250x25x76 mm The smallest wheel diameter 120 mm Longitudinal movement of table 1060 mm Lateral movement of table 350 mm
item-No.: 133669272
Supply and removal automatic system of cubic and round small parts, conveyor belt and slide. Currently 130 mm part length Pumping height approx. 118 mm Weight 250 kg
item-No.: 133597850
-
ON Price
country-de DE
1 room system, used as a foreman's Office in fabrication Hall (with traces of use; Floor, walls; Ceiling) Size 5400 x 6030 x 2760 2 window front (4 Windows and 1 door) 1 window front (4 window and 1 small window and 1 segment without window) 1 segment wall without Windows 1 wash basin with water heater Ceiling lights (neon tubes) are used to Built in about 1994/1996
item-No.: 133597800
Technical data: -Saw blade diameter 420 mm -Blade hole 30 mm -Max cutting length 6000 mm -smallest cutting length 90° + 45 ° 335 mm -See diagram below cutting area -Swivel range to inside pneumatic 90-22.5 ° - tilt range inside pneumatically 90 - 45 ° -Blade rotation speed 2800 RPM -Drive: 400 V / 2 x 4000 Watts -Compressed air supply 7 bar -Air consumption per work cycle - no spray approx. 40 l -with spray approx. 64 l -Space requirement approx. B H 7500 x 1600 X 1600  ...
item-No.: 133557113
6 COLORS POLYTYPE (round cups) Colours : 6 Equipment / Additional information: • stacker • Various small machine parts
item-No.: 133556916
Autom. Cassette for warehouse, approximately 489 cassettes, cassette length 6, 60 m, 1, 000 kg/Kasstte - used -: Price from site: â?¬189.000.-(net), excluding disassembly, transport, etc.! Suitable for aluminium or PVC-Provile, pipes and steel reinforcement, last for automatic optimised storage of PVC profiles used! Manufacturer: Remmert Year of 1994/1995, improvements in 2004, 2010 Cassette courses: 489 St Cassette payload up to 1000 daN Speed: Drive: 80, lifting: 60, telescoping: 18/36 m ...
item-No.: 133556904
-
150 €
country-de DE
approximately 59 units commissioning trolleys, table car, Wanzl - used -: Price at time of purchase of the total: â?¬8.850.-(net) 150.-â?¬/ piece =, dismantled and loaded! Purchase small subsets: price per piece (NET, dismantled and loaded): â?¬185 Internal name: picking trolley food Manufacturer: Wanzl Type: picking trolley KT 3 / 1297 Year of constr.: 2016 Capacity: 300kg The floor load-bearing capacity: 75kg External dimensions: 1893(1250) x 625 x 1233 mm 4 swi ...
item-No.: 133520220
Rohrbiegemaschine; numerisch gesteuert; max. Aluminium Rohrdurchmesser 20 mm; Steuerung Fabr. Siemens; Typ Simatic HMI; Gittereumhausung mit Sicherheitslichtschranke
item-No.: 133520221
Tube bending machines; numerically controlled; Max aluminum tube diameter 20 mm â control Fabr. Siemens; Type SIMATIC HMI; Gittereumhausung with safety light barrier
item-No.: 133520208
Labeler SIDEL Alfa Rollquatro F 25 Hot Melt Glue with auxiliaries This Alfa Rollquatro labeler was installed in 2006 and it was operated time to time till 2014 total operating hours not exceeding 10 000 hours! Rollquattro is a rotary wraparound labeler equipped with an ergonomically designed, robust and precise linear labeling station with place for two rolls of film labels. Label is attached to bottle with two hot melt glue stripes. Label platforms are teethed belt driven via single servo motor. This labeler h ...
item-No.: 133414206
-
4.900 €
country-de DE
Stanzlstg.: 7.5 to. Table size: 2000 x 750 mm Projection: 1620 mm Workspace in X: 2130 mm Total power: 2,2 KW / 400 V Machine weight: 3300 kg Equipment / Accessories: Copy Setup Circle cutting attachment various tools + small parts - see photo The machine is suited to flanging, beading, punching, etc. All technical data are created according to our best knowledge and existing documents; Confirm reserved error. Each party has the opportunity to test the machine in advance under current in our facto ...
item-No.: 133409384
KHS Beer KEG Filling Line 60 KEG / hour This KEG line was delivered by KHS Till in year 1998 and later it was upgraded to Siemens Simatic S-7 PLC control. The line has flash pasteurizer with a 3 m3 buffer tank and semi manual KEG handling hoist. Filling line has 5 stations which has 4 washing stations - one for caustic, one for acid and two for hot water washing , and then one for beer filling with CO2 flushing. The line has two small CIP tanks one for caustic and one for acid. CO2 and low pressure steam have b ...
item-No.: 133409359
-
BN 1.250 €
country-de DE
Smooth surface griddle used but works perfect and for reasonable price of the manufacturer: Garland, model: Ed 36G. 3 hot zones, individual adjustable, small splash guard. SER. No.: 92J351. Dimensions: 920x620x350mm, size: 900x460mm. Elek. Voltage: 220/380V, elek. Power: 10.1kW. the mismatch? We resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request.
item-No.: 133373331
with differential gear, Automatic shifting and tangential milling facility. Gr. Workpiece diameter. with/without Overarm 340/400 mm Gr. Module 6 mm Gr. Axial travel 275 mm Gr. Tangential feed way (Cutter displacement) 100 mm Gr. Helix angle 456° KL. being milled tooth number in part geared for small numbers of teeth 4 Gr. Fräserdurchm. 145 mm Gr. Cutter length 170 mm Diameter of the clamping surface of the table 370 mm Distance between cutter middle and clamping area of table of Max 470 mm Distance bet ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)