1012 results

similar results found in category trailers/hydraulic work platforms

item-No.: 139419364
-
14.500 €
country-de DE
3-part exhibition stand, exhibition pavilion for snack, dair kbis or stall with trailer for storage and transport Built in 1979 Renovated with great effort in 2016 The complete stand consists of three parts, a large main pavilion and two smaller side pavilions, see picture 2 The entire 3-part exhibition stand has a sales counter estimated. 30 running meters Ideal for Oktoberfests, folk festivals and large fairs Sales take place WITHOUT the devices visible in the background (chicken grills,  ...
item-No.: 139123400
-
BN 74.500 €
country-de DE
Refurbished Faymonville low-bed semi-deep loader with detachable gooseneck. With special conversion of FB AG Burkau. Gradually extendable up to 4100mm. Loading area dimensions: Low bed area=6400 to 10500mm. Loading area in the rear (with excavator handle) = 4300x2550mm. Loading area on gooseneck= 3100x2450mm. 3 meter package. BPW axles with hydraulic forced steering, drum brakes. For this purpose, radio remote control for interlanes and external steering, e.g. on construction sites On-board 24V  ...
item-No.: 138933449
-
7.590 €
country-de DE
Heavy-duty transport truck platform trailer A very well-preserved used heavy-duty trailer is offered here for in-house transport traffic with reciprocal train drawbar and two steering axles. Data: Manufacturer: Kampa Model: PFA-VRA Built: 2011 Loading area: 6000 x 2500 mm (L x W ) Charging height: 650mm Total length with drawbar:ca 7500mm Drawbar length: 1500mm (usable on both sides) Payload: 10,000kg 6 Km/h Steering: all axles Accessories / Optional equipment: The platform car is reinforced in the  ...
item-No.: 138933447
-
10.000 €
country-de DE
Heavy-duty transport truck platform trailer A very well-preserved used heavy-duty trailer is offered here for in-house transport traffic with reciprocal train drawbar and two steering axles. Data: Manufacturer: Kampa Model: PFA-VRA Built: 2010 Loading area: 10000 x 2500 mm (L x W ) Charging height: 650mm Total length with drawbar:ca 11500mm Drawbar length: 1500mm (usable on both sides) Payload: 10,000kg 6 Km/h Steering: all axles Accessories / Optional equipment: The platform car is reinforced in the  ...
item-No.: 138888335
Digitales Programm -R-Hydraulic-R-N2Clean-N-N-Clean-r-N-Clean-r-n
item-No.: 138888334
Digital program Hydraulic 2 Knives Clean and reviewed
item-No.: 138871267
-
70.000 €
country-es ES
Capacity 1100/800t Shut Height 1756 Slide dimensions 3350x2135
item-No.: 138871268
-
70.000 €
country-es ES
Capacity 1100/800t Shut Height 1756 Slide dimensions 3350x2135
item-No.: 138843505
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! Description ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working. CLAMPING FORCE 2.000 kN YEAR OF BUILDING 20 ...
item-No.: 138658345
Heavy-duty trailers, industrial trailers, platform trailers 5 tonners All-wheel drive Width:150cm Height: 45cm Length:300cm Good condition fully functional can be visited on site and tried out. Shipping also abroad. Visit: Basically, I would like to point out to you that, in order to avoid misunderstandings, the article can be visited before purchase and tested under electricity. Please ask questions before purchasing to avoid ambiguity. In case of general questions or an appointment for a visit,  ...
item-No.: 137907340
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! Description ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working. Technical details WORKING HOURS 70.000 CL ...
item-No.: 136406398
Heavy load-platform transport trailer Technical data: -Carrying capacity approx. 3000 kg -Air-ripened wheels -Platform length approx. 2600 mm -Platform width approx. 1300 mm -Platform height approx. 600 mm -Total length with train dLkey approx. 3900 mm -Weight approx. 400 kg
item-No.: 136406394
Heavy load â platform transport trailer for long-haul Technical data: -Carrying capacity approx. 5000 kg -Full rubber tire 300 x 90 x 203 -Platform length approx. 3000 mm -Platform width approx. 1500 mm -Platform height approx. 430 mm -Leveable length 2300 mm -Total length with train dLkey approx. 5600 mm -Weight approx. 800 kg
item-No.: 136222859
Heavy load-platform transport trailer Technical data: -Carrying capacity 8000 kg -Both axes steerable/all-wheel axle thigh steering -Train dike can be on the front or back Be used -Full rubber tire 425/150-305 -Platform length approx. 2500 mm -Platform width approx. 1250 mm -Platform height approx. 690 mm -Total length without train dLength 3300 -Total length with train dLkey approx. 4400 mm -Weight approx. 800 kg
item-No.: 136114461
YEAR: 2000 COMPLETE OF SEMITRAILER PIACENZA
item-No.: 135839489
Technical data: -Carrying capacity 8000 kg -Both axes steerable/all-wheel axle thigh steering -Train dike can be on the front or back -to be used -Full rubber tire 425/150-305 -Platform length approx. 2500 mm -Platform width approx. 1250 mm -Platform height approx. 690 mm -Total length without train dLength 3300 -Total length with train dLkey approx. 4400 mm -Weight approx. 800 kg
item-No.: 135803455
GASTRO PAVILLION FESTZELT ZELT HALLE APRES SKI BAR STAHLHALLE GASTRO-PAVILLION Apres-Ski Bar/Beach Bar/Golf Course Cafe Contained, heated, complete with furnishings BJ: 2004 new price â?¬240,000 MASSE OF THE GREAT EVERY: LÃ?NGE: 12.60 m BREITE: 12.20m HÃ?HE eaves: 2.90 m HÃ?HE spire: 6.50 m NUTZFLÃ?CHE: About 100 m ² BESTUHLUNG: About 100 seats Construction: -Anodised steel structure galvanized/screwed Ground: -Steel frame construction g ...
item-No.: 135653108
-
2.200 €
country-de DE
First approval: 03/2006 HU: 06/2019 Ab. Total weight: 18,000 kg Empty weight: 2,930 kg Payload: 15.070 kg Tage state: 30-60% Sale without BDF change suitcases, just the Lafette! Price plus 19% VAT from location near Augsburg Errors and interim sales reserved
item-No.: 135466780
PRESS DESIGN drive system hydraulic SLIDE total force (nominal) 400 to SLIDE (HYDR. PRESS) approximation velocity max. 200 mm/s working velocity min. 15 mm/s working velocity max. 44 mm/s return velocity max. 200 mm/s COUNTER RAM nominal force 100 to stroke 30 mm V-RING nominal force 200 to stroke 30 mm TOOL DIMENSIONS lower table (left-right) 650 mm lower table (front-back) 650 mm upper table (left-right) 850 mm upper table (front-back) 950 mm shut height max. 420 ...
item-No.: 135466781
-
ON Price
country-ca CA
PRESS DESIGN Hydraulic drive system Slide Total force (nominal) 400 to SLIDE (HYDR. PRESS) approximation velocity max. 200 mm/s Working velocity min. 15 mm/s Working velocity max. 44 mm/s velocity max. 200 mm/s COUNTER RAM Nominal force 100 to stroke 30 mm V-RING Nominal force 200 to stroke 30 mm TOOL DIMENSIONS Dlower table (left-right) 650 mm lower table (front-back) 650 mm Upper table (left-right) 850 mm Upper table (front-back) 950 mm shut height max. 420 mm  ...
item-No.: 135466778
PRESS DESIGN drive system hydraulic SLIDE total force (nominal) 650 to stroke 280 mm SLIDE (HYDR. PRESS) approximation velocity max. 180 mm/s working velocity min. 3 mm/s working velocity max. 40 mm/s return velocity max. 180 mm/s COUNTER RAM nominal force 130 to stroke 30 mm V-RING nominal force 320 to stroke 30 mm TOOL DIMENSIONS lower table (left-right) 1000 mm lower table (front-back) 900 mm upper table (left-right) 1000 mm upper table (front-back) 1050 mm s ...
item-No.: 135466779
-
ON Price
country-ca CA
PRESS DESIGN Hydraulic drive system Slide Total force (nominal) 650 to stroke 280 mm SLIDE (HYDR. PRESS) approximation velocity max. 180 mm/s Working velocity min. 3 mm/s Working velocity max. 40 mm/s velocity max. 180 mm/s COUNTER RAM Nominal force 130 to stroke 30 mm V-RING Nominal force 320 to stroke 30 mm TOOL DIMENSIONS Dlower table (left-right) 1000 mm lower table (front-back) 900 mm Upper table (left-right) 1000 mm Upper table (front-back) 1050 mm shut he ...
item-No.: 135466776
PRESS DESIGN drive system hydraulic feedstock transport direction left to right SLIDE total force (nominal) 1000 to stroke 180 mm stroke rate (max.) 30 /min SLIDE (HYDR. PRESS) approximation velocity max. 200 mm/s working velocity min. 3 mm/s working velocity max. 50 mm/s return velocity max. 200 mm/s COUNTER RAM nominal force 250 to stroke 40 mm V-RING nominal force 500 to stroke 40 mm TOOL DIMENSIONS lower table (left-right) 950 mm lower table (front-back) 1300  ...
item-No.: 135466777
-
ON Price
country-us US
PRESS DESIGN Hydraulic drive system feedstock transport direction left to right Slide Total force (nominal) 1000 to stroke 180 mm stroke rate (max.) 30/min SLIDE (HYDR. PRESS) approximation velocity max. 200 mm/s Working velocity min. 3 mm/s Working velocity max. 50 mm/s velocity max. 200 mm/s COUNTER RAM Nominal force 250 to stroke 40 mm V-RING Nominal force 500 to stroke 40 mm TOOL DIMENSIONS Dlower table (left-right) 950 mm lower table (front-back) 1300 mm U ...
item-No.: 135466774
PRESS DESIGN drive system hydraulic feedstock transport direction left to right SLIDE total force (nominal) 1200 to stroke 200 mm stroke rate (max.) 35 /min SLIDE (HYDR. PRESS) approximation velocity max. 45 mm/s working velocity min. 2 mm/s COUNTER RAM nominal force 250 to V-RING nominal force 500 to TOOL DIMENSIONS lower table (left-right) 1150 mm lower table (front-back) 1300 mm upper table (left-right) 1150 mm upper table (front-back) 1100 mm shut height max. 460 ...
item-No.: 135466775
-
ON Price
country-us US
PRESS DESIGN Hydraulic drive system feedstock transport direction left to right Slide Total force (nominal) 1200 to stroke 200 mm stroke rate (max.) 35/min SLIDE (HYDR. PRESS) approximation velocity max. 45 mm/s Working velocity min. 2 mm/s COUNTER RAM Nominal force 250 to V-RING Nominal force 500 to TOOL DIMENSIONS Dlower table (left-right) 1150 mm lower table (front-back) 1300 mm Upper table (left-right) 1150 mm Upper table (front-back) 1100 mm shut height max. 460 ...
item-No.: 135396390
COLD FORGING PRESS SCHULER 1000 TMplate 1250 X 800 MM
item-No.: 135396389
COLD FORGING PRESS SCHULER 1000 TM plate 1250 X 800 MM
item-No.: 134368948
Gepflegte Stahlbau-Lagerhalle mit einer BGF von ca. 280 qm, welche demnächst abgebaut werden soll. Gemäß Bau-Unterlagen wurde die Stahlhalle in 2005 geplant/ errichtet. Die bisher für Lagerzwecke genutzte Kalthalle befindet sich in einem guten Zustand. Mögliche Nutzung: Gewerbehalle, Handwerker-/ Werkstatthalle, Künstler-Atelier u.v.a.m. ABMESSUNGEN gemäß Übersichts-Zeichnung: Grundflaeche: ca.282,60 qm; Hallenlaenge: ca. 28,07 m AK Wandbekleidung; Laengsraster: ca. 5,60 m Rahmenabstand/ Stützen ...
item-No.: 134368949
-
ON Price
country-de DE
Steel Hall Clean steel storage shed with a gross floor area of about 280 square meters, which is to be dismantled soon. According to production documents, the steel Hall was planned in 2005 / built. The cold Hall used so far for storage purposes is in good condition. Possible use: industrial building, craftsmen - / workshop, artist Studio and much more. DIMENSIONS according to the survey drawing: floor area: ca. 282, 60 sqm. Hall length: 28,07 m AK wall tiling; Longitudinal grid: 5.60 m border spacing  ...
item-No.: 134194303
GEMINIS - Model GHT5-G2-1000 x 3000 - Year of manufacture 2005 - Distance between centres 3,000 mm - Diameter over cross slide 680 mm - Diameter over bed 1000 mm - Main motor power S1/S6: 30/37 kW - maximum torque 4.500/5.625 Nm - CNC Siemens 840 D - Bed width: 550 mm width - Points height from the flat guide: 500 mm - Weight approx. 9,500 kg - Weight of workpiece between points (1 bezel) 6,200 kg - Weight of workpiece between points 4,800 kg - main shaft hole diameter 104 mm - Main shaft Nose: DIN  ...
item-No.: 134193798
In Transitus S.L. haben wir eine Menge von verschiedenen hydraulischen Ventiler für Spritzgießmaschinen, verschiedenen Marken. Besuchen Sie unsere Homepage www.transitus.es und Verfügbarkeiten, finden wir auch Ihre Ersatzteile!
item-No.: 134193797
In Transitus S.L. we have a lot of diferent Hydraulic Valver for Injection Moulding Machines, diferent brands. Visit our homepage www.transitus.es and check the stock, also we can find your spareparts!
item-No.: 134155429
-
9.500 USD
country-us US
BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $9,500
item-No.: 134131919
-
8.900 USD
country-us US
Hemco hydraulic tracing lathe Hopper feed very good condition...$8,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)
item-No.: 134128523
-
20.000 USD
country-us US
LOCATELLI- model BIG-ARIETE- Hi production- automatic copy lathe fully hydraulic cycles and tooling advances: automatic hopper feeds squares or round blanks Station #1...blank is advanced...first trim knife trims to blank to fit thru hollow chuck Station #2...(1) roughing knife follows template...to rough to basic shape Station #3...(1) finishing knife makes the first finish cut Station #4...(1) finishing knife (set slightly deeper) makes finish cut Station #5 & #6 end boring or shaping the ou ...
item-No.: 134128521
-
39.000 USD
country-us US
LOCATELLI-DISHMATIK- bowl/dish lathe does bowls and face plate work (5) hydraulic tracing stations They make multiple passes on all three axis with varying depth drops vacuum chucking complete with (2) Levigatrice pedestal sanders and vacuum pump condition (as new)less than 80 hours on lathe (new cost was ($123,000+)…..Price-$39,000
item-No.: 133896789
Hydraulische Presse Loire 500 tn, CEplate 2000 x 1200 mm, zwischen frontal binden Bars 2050 mm
item-No.: 133896788
Hydraulic press Loire 500 tn, CE plate 2000 x 1200 mm, frontal between tie bars 2050 mm
item-No.: 133337583
-
13.900 €
country-de DE
Semi trailers Tautliners Coilmulde EDSCHA Kögel cargo SN 24 (396) Koegel-sn24-39601. JPG Category: Trailers & trailer Net price: â?¬21000 Kögel sn24-39601. JPGkoegel-sn24-39602.JPGkoegel-sn24-39603.JPGkoegel-sn24-39604.JPGkoeg el-sn24-39605.JPGkoegel-sn24-39606.JPGkoegel-sn24-39607.JPGkoegel-sn24 -39608.JPGkoegel-sn24-39609.JPGkoegel-sn24-39610.JPG Int: 396 Tautliner Coilmulden-longer trailers in top condition: Manufacturer Kögel Type SN 24 (S24-1) Initial registration 03 / 2017 HU 05 / 2019, SP  ...
item-No.: 133337304
item-No.: 132557714
Pulling vehicle for trailers, Peugeot Diesel engine, fully operational.
item-No.: 132487278
VACUUM DRYER MOLDRUP-SSV PLANT FOR DRYING WITH SUPERHEATED STEAM UNDER VACUUM Vacuum autoclave Diameter 2.300 mm Length 18.000 mm Wood volume: app. 10 - 12 m3 per charge (50 mm thickness) Working pressure: 0 - 1 bar (abs) Working temperature: 39 - 100 C Material: 6 mm AISI 304 stainless steel plate Wood pack size: max 1,20 m x 1,35 m x 11,00 m Wood sticks: min. 19 mm Door: 1 mechanical rapid closure door Complete with internal rails for the trolleys Insulated with 80 mm super-wool and covered by a 0,6 ...
item-No.: 131916004
-
17.500 USD
country-us US
CENTAURIO hydraulic tracing lathe Model T-5- 1600 Semiautomatic hydraulic copy lathe variable carriage feed speeds (2) hydraulic tracing units 19"X63" max. turning 5 hp. motor with breaking rotation (6) speeds; 900,1500,1800,2250,3000,4500 rpm. hydraulic variable speed carriage hydraulic tail stock, variable pressure auto work piece centering system interlinked to tailstock pre trim knife for steady rest (2) upper manual tool holders OPERATION; manual or automatic single or dual passes, with rough and  ...
item-No.: 131916003
-
17.500 US
country-us US
TORREDA PALPATOR Copy Lathe 1800 N/A All 12VDC, hyd. Motors & Switches, (2) hydraulic tracing knives w/3” stroke, roughing knife,(2) adj. steady rest,(2) Turret steady rest, up to 72” long x 9” diameter, lots of extras. Knife grinder & tooling, bought new, never used hard, excellent condition.
item-No.: 131839545
-
BN 1.700 €
country-ch CH
Work trailer / tool trailer of Ettinger W-1-250-80 Circulation 28.01.2002 Weight 390 kg Payload 460 kg Total weight 850 kg L x W x H: 250 x 110 x 110 cm without tools The trailer is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Subject to changes, errors, and intermediate sale! MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 131839539
-
BN 1.700 €
country-ch CH
Work trailer / tool trailer of Ettinger W-1-250-80 Circulation 28.01.2002 Weight 390 kg Payload 460 kg Total weight 850 kg L x W x H: 250 x 110 x 110 cm without tools The trailer is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Subject to changes, errors, and intermediate sale! MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 131659114
-
34.900 US
country-us US
Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $34,900.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive  ...
item-No.: 130806160
Mobile master band saw. Top stock.
item-No.: 129758393
-
2.000 €
country-de DE
2 x 5 t earrings with flatbed, ground well with new press platens, instantly ready to go
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)