1160 results

similar results found in category trailers/long material transporters

item-No.: 139419364
-
14.500 €
country-de DE
3-part exhibition stand, exhibition pavilion for snack, dair kbis or stall with trailer for storage and transport Built in 1979 Renovated with great effort in 2016 The complete stand consists of three parts, a large main pavilion and two smaller side pavilions, see picture 2 The entire 3-part exhibition stand has a sales counter estimated. 30 running meters Ideal for Oktoberfests, folk festivals and large fairs Sales take place WITHOUT the devices visible in the background (chicken grills,  ...
item-No.: 139123400
-
BN 74.500 €
country-de DE
Refurbished Faymonville low-bed semi-deep loader with detachable gooseneck. With special conversion of FB AG Burkau. Gradually extendable up to 4100mm. Loading area dimensions: Low bed area=6400 to 10500mm. Loading area in the rear (with excavator handle) = 4300x2550mm. Loading area on gooseneck= 3100x2450mm. 3 meter package. BPW axles with hydraulic forced steering, drum brakes. For this purpose, radio remote control for interlanes and external steering, e.g. on construction sites On-board 24V  ...
item-No.: 138933449
-
7.590 €
country-de DE
Heavy-duty transport truck platform trailer A very well-preserved used heavy-duty trailer is offered here for in-house transport traffic with reciprocal train drawbar and two steering axles. Data: Manufacturer: Kampa Model: PFA-VRA Built: 2011 Loading area: 6000 x 2500 mm (L x W ) Charging height: 650mm Total length with drawbar:ca 7500mm Drawbar length: 1500mm (usable on both sides) Payload: 10,000kg 6 Km/h Steering: all axles Accessories / Optional equipment: The platform car is reinforced in the  ...
item-No.: 138933447
-
10.000 €
country-de DE
Heavy-duty transport truck platform trailer A very well-preserved used heavy-duty trailer is offered here for in-house transport traffic with reciprocal train drawbar and two steering axles. Data: Manufacturer: Kampa Model: PFA-VRA Built: 2010 Loading area: 10000 x 2500 mm (L x W ) Charging height: 650mm Total length with drawbar:ca 11500mm Drawbar length: 1500mm (usable on both sides) Payload: 10,000kg 6 Km/h Steering: all axles Accessories / Optional equipment: The platform car is reinforced in the  ...
item-No.: 138658345
Heavy-duty trailers, industrial trailers, platform trailers 5 tonners All-wheel drive Width:150cm Height: 45cm Length:300cm Good condition fully functional can be visited on site and tried out. Shipping also abroad. Visit: Basically, I would like to point out to you that, in order to avoid misunderstandings, the article can be visited before purchase and tested under electricity. Please ask questions before purchasing to avoid ambiguity. In case of general questions or an appointment for a visit,  ...
item-No.: 138556120
Vacuum bell. Brand: Frimaq. Model: V-110. Year: 2005 Maximum power: 3.6 Kw Vacuum pump 100m3/h Welding in L. Welding bar: 900mm long, 550mm wide. Maximum product height: 300mm. Total dimensions: 1200mm long, 840mm wide, 1100mm high.
item-No.: 138511997
Vacuum meat kneader. Brand: Tecmaq, S.A. Model: Alpha 150. Year: 1996. T-blade system and tipper. Bucket dimensions: 480mm wide, 600mm long, 610mm high. Total dimensions: 700mm wide, 1260mm long, 1630mm high.
item-No.: 137689706
-
8.500 €
country-pt PT
Mechanical Lathe OPTIMUM D460 x 1500 Semi-New Model D 460 x 1500 D Technical Features: Electrical Connection 400 V/3 Ph ~ 50 Hz Total Load 5.8 kW Equip. 100 W coolingHeight of Stitches 230 mm Distance between points 1 ' 500 mm Ø Reversible over the cava 465 mm Turntable Ø on transverse carriage 270 mm Ø Reversible without Cava 690 mm Length of Vane 240 mm Width of Pit 300 mmSpeeds Tree speeds 25 – 2 ' 000 min-1 Number of speeds 12 Chuck Tree Cone CM 6 Cone of the Camlock tree DIN ISO 702- ...
item-No.: 136406398
Heavy load-platform transport trailer Technical data: -Carrying capacity approx. 3000 kg -Air-ripened wheels -Platform length approx. 2600 mm -Platform width approx. 1300 mm -Platform height approx. 600 mm -Total length with train dLkey approx. 3900 mm -Weight approx. 400 kg
item-No.: 136406394
Heavy load â platform transport trailer for long-haul Technical data: -Carrying capacity approx. 5000 kg -Full rubber tire 300 x 90 x 203 -Platform length approx. 3000 mm -Platform width approx. 1500 mm -Platform height approx. 430 mm -Leveable length 2300 mm -Total length with train dLkey approx. 5600 mm -Weight approx. 800 kg
item-No.: 136222859
Heavy load-platform transport trailer Technical data: -Carrying capacity 8000 kg -Both axes steerable/all-wheel axle thigh steering -Train dike can be on the front or back Be used -Full rubber tire 425/150-305 -Platform length approx. 2500 mm -Platform width approx. 1250 mm -Platform height approx. 690 mm -Total length without train dLength 3300 -Total length with train dLkey approx. 4400 mm -Weight approx. 800 kg
item-No.: 136114461
YEAR: 2000 COMPLETE OF SEMITRAILER PIACENZA
item-No.: 135928792
Peristaltic pump. Brand Name: DL. Type: 55 Year: 1998 8, 2M3/h 4 Kw 1420/40 Rpm 10 bar pressure Dimensions: 1.000 mm wide, 1,000 mm long, 2,000 mm high.
item-No.: 135839489
Technical data: -Carrying capacity 8000 kg -Both axes steerable/all-wheel axle thigh steering -Train dike can be on the front or back -to be used -Full rubber tire 425/150-305 -Platform length approx. 2500 mm -Platform width approx. 1250 mm -Platform height approx. 690 mm -Total length without train dLength 3300 -Total length with train dLkey approx. 4400 mm -Weight approx. 800 kg
item-No.: 135803455
GASTRO PAVILLION FESTZELT ZELT HALLE APRES SKI BAR STAHLHALLE GASTRO-PAVILLION Apres-Ski Bar/Beach Bar/Golf Course Cafe Contained, heated, complete with furnishings BJ: 2004 new price â?¬240,000 MASSE OF THE GREAT EVERY: LÃ?NGE: 12.60 m BREITE: 12.20m HÃ?HE eaves: 2.90 m HÃ?HE spire: 6.50 m NUTZFLÃ?CHE: About 100 m ² BESTUHLUNG: About 100 seats Construction: -Anodised steel structure galvanized/screwed Ground: -Steel frame construction g ...
item-No.: 135653108
-
2.200 €
country-de DE
First approval: 03/2006 HU: 06/2019 Ab. Total weight: 18,000 kg Empty weight: 2,930 kg Payload: 15.070 kg Tage state: 30-60% Sale without BDF change suitcases, just the Lafette! Price plus 19% VAT from location near Augsburg Errors and interim sales reserved
item-No.: 135432067
-
18.000 €
country-es ES
CNC Milling Machine. Rebuilt in 2013. CNC Heidenhain TNC155. Table of 1500x560. Longitudinal travel: 1300mm. Cross travel: 630mm. Vertical travel: 630mm. CE.
item-No.: 135105042
Automatic sheetmetal warehouse (vertical)/ Tower. 29 shelves. Weight Max. 3000 kg. / Height 85 mm. For metal sheets up to 3000 x 1500. In operation Tower dimensions: -Height: 9,900 mm. -Width: 4,500 mm. -Long: 8.300 mm.
item-No.: 134823673
Pop Glace Entière (TK-pop) Pleine Fabrique des glace.Usine Schlagstöcke Aumont Entière pour Liquide le Entièrement rénové.Chaque Maschine Avec 4 Ou 5 Ou 6 Voies Jusqu' À l'exigence du Client. Pièce Mécanique rénovée.Partie Électrique Entièrement Rénovée Avec Plupart des Einzelteile PANASONIC, PLC, Écran tactile, Photocellule unterhaltsfreien pour Spot.La Longueur Variable Être Peut Juste Sur l' Écran est Compoused tactile.L'usine Avec 3 Maschinen Gießen Produktion: 15, 000 PCs Par Heure Pour Une  ...
item-No.: 134823672
Pop Glace (Frozen pop) pleine entière fabrique des batons of glace. Usine d'Occasion entière pour liquide le entièrement rénové. Chaque machine avec 4 ou 5 ou 6 voies jusqu' à l'exigence du client. Piece mécanique rénovée. Partie entièrement rénovée avec électrique the plupart des composants PANASONIC, PLC, écran tactile, photocellule électrique pour Spot. The peut être variable length juste sur l' écran tactile. L'usine est compoused avec 3 machines pour production: 15,000 PCs par heure  ...
item-No.: 134368948
Gepflegte Stahlbau-Lagerhalle mit einer BGF von ca. 280 qm, welche demnächst abgebaut werden soll. Gemäß Bau-Unterlagen wurde die Stahlhalle in 2005 geplant/ errichtet. Die bisher für Lagerzwecke genutzte Kalthalle befindet sich in einem guten Zustand. Mögliche Nutzung: Gewerbehalle, Handwerker-/ Werkstatthalle, Künstler-Atelier u.v.a.m. ABMESSUNGEN gemäß Übersichts-Zeichnung: Grundflaeche: ca.282,60 qm; Hallenlaenge: ca. 28,07 m AK Wandbekleidung; Laengsraster: ca. 5,60 m Rahmenabstand/ Stützen ...
item-No.: 134368949
-
ON Price
country-de DE
Steel Hall Clean steel storage shed with a gross floor area of about 280 square meters, which is to be dismantled soon. According to production documents, the steel Hall was planned in 2005 / built. The cold Hall used so far for storage purposes is in good condition. Possible use: industrial building, craftsmen - / workshop, artist Studio and much more. DIMENSIONS according to the survey drawing: floor area: ca. 282, 60 sqm. Hall length: 28,07 m AK wall tiling; Longitudinal grid: 5.60 m border spacing  ...
item-No.: 134194303
GEMINIS - Model GHT5-G2-1000 x 3000 - Year of manufacture 2005 - Distance between centres 3,000 mm - Diameter over cross slide 680 mm - Diameter over bed 1000 mm - Main motor power S1/S6: 30/37 kW - maximum torque 4.500/5.625 Nm - CNC Siemens 840 D - Bed width: 550 mm width - Points height from the flat guide: 500 mm - Weight approx. 9,500 kg - Weight of workpiece between points (1 bezel) 6,200 kg - Weight of workpiece between points 4,800 kg - main shaft hole diameter 104 mm - Main shaft Nose: DIN  ...
item-No.: 134193888
GEMINIS - Model GHT5-G2-1000 x 3000 - Year of manufacture 2005 - Distance between centres 3,000 mm - Diameter over cross slide 680 mm - Diameter over bed 1000 mm - Main motor power S1/S6: 30/37 kW - maximum torque 4.500/5.625 Nm - CNC Siemens 840 D - Bed width: 550 mm width - Points height from the flat guide: 500 mm - Weight approx. 9,500 kg - Weight of workpiece between points (1 bezel) 6,200 kg - Weight of workpiece between points 4,800 kg - main shaft hole diameter 104 mm - Main shaft Nose: DIN  ...
item-No.: 134051064
Bore capacity in steel (diameter) 50 mm. Morse cone 5 Spindle travel 125 mm. Spindle turning speed range 16÷800 r.p.m. Column vertical travel 900 mm. Column longitudinal travel 130 mm. Crossrail longitudinal travel 900 mm. Drilling splindle rotation ?190º Main power motor 4Kw. Machine weight 6300 Kg.
item-No.: 133337583
-
13.900 €
country-de DE
Semi trailers Tautliners Coilmulde EDSCHA Kögel cargo SN 24 (396) Koegel-sn24-39601. JPG Category: Trailers & trailer Net price: â?¬21000 Kögel sn24-39601. JPGkoegel-sn24-39602.JPGkoegel-sn24-39603.JPGkoegel-sn24-39604.JPGkoeg el-sn24-39605.JPGkoegel-sn24-39606.JPGkoegel-sn24-39607.JPGkoegel-sn24 -39608.JPGkoegel-sn24-39609.JPGkoegel-sn24-39610.JPG Int: 396 Tautliner Coilmulden-longer trailers in top condition: Manufacturer Kögel Type SN 24 (S24-1) Initial registration 03 / 2017 HU 05 / 2019, SP  ...
item-No.: 133337304
item-No.: 132557714
Pulling vehicle for trailers, Peugeot Diesel engine, fully operational.
item-No.: 132487278
VACUUM DRYER MOLDRUP-SSV PLANT FOR DRYING WITH SUPERHEATED STEAM UNDER VACUUM Vacuum autoclave Diameter 2.300 mm Length 18.000 mm Wood volume: app. 10 - 12 m3 per charge (50 mm thickness) Working pressure: 0 - 1 bar (abs) Working temperature: 39 - 100 C Material: 6 mm AISI 304 stainless steel plate Wood pack size: max 1,20 m x 1,35 m x 11,00 m Wood sticks: min. 19 mm Door: 1 mechanical rapid closure door Complete with internal rails for the trolleys Insulated with 80 mm super-wool and covered by a 0,6 ...
item-No.: 131916003
-
17.500 US
country-us US
TORREDA PALPATOR Copy Lathe 1800 N/A All 12VDC, hyd. Motors & Switches, (2) hydraulic tracing knives w/3” stroke, roughing knife,(2) adj. steady rest,(2) Turret steady rest, up to 72” long x 9” diameter, lots of extras. Knife grinder & tooling, bought new, never used hard, excellent condition.
item-No.: 131911669
-
12.900 US
country-us US
ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$12,900
item-No.: 131839545
-
BN 1.700 €
country-ch CH
Work trailer / tool trailer of Ettinger W-1-250-80 Circulation 28.01.2002 Weight 390 kg Payload 460 kg Total weight 850 kg L x W x H: 250 x 110 x 110 cm without tools The trailer is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Subject to changes, errors, and intermediate sale! MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 131839539
-
BN 1.700 €
country-ch CH
Work trailer / tool trailer of Ettinger W-1-250-80 Circulation 28.01.2002 Weight 390 kg Payload 460 kg Total weight 850 kg L x W x H: 250 x 110 x 110 cm without tools The trailer is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Subject to changes, errors, and intermediate sale! MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
item-No.: 131839512
-
39.000 US
country-us US
C.M.S. CNC Turret Head Machining Center Model TRIAX R-65 Sn 285, 1986 IBH controller modus 1 (2) vacuum tables- each 48” deep x 60” long. (1) five station lathe section. Max. part 6.5” x 45” (2) vacuum pumps 5 hp. each. Total of (30) routers. (6) station turret with (5) routers per station. Consisting of; (2) stations of (5) routers each - 2 ½ hp. each. (4) stations of (5) routers each – 8 hp. each. Digitizing table for flat work or carving. Lathe s ...
item-No.: 131768577
9 Werkzeuge oberen Walze (5 drehen + 4 angetrieben) - hintere Station mit 9 Werkzeugen (2 + 2 in Richtung Hauptspindel) und 2 + 2 in Richtung Sub Spindel - 2 x C-AxisBar-Kapazität 32 mm - max Spindelstocks Schlaganfall 320 Mmmain/Sub Spindeldrehzahl Spindel 8000/7000 Rpmmain/Sub Leistung 7.5/3.7 kWspeed/Kraft angetriebenen Werkzeugen auf oberen Walze 5000 u/min/1 kWdimensions: 2770x1370x1790h mm - 2850 KgMeldas 635 LC Control - Iemca Boss 432r / 32L Barfeed neu in 2002
item-No.: 131768576
9 tools upper platen(5 turning+4 driven) - rear station with 9 tools (2+2 towards main spindle and 2+2 towards sub spindle) - 2 x C axis Bar capacity 32 mm - max headstock stroke 320 mm main/sub spindle speed 8000/7000 Rpm main/sub spindle power 7.5/3.7 kW speed/power driven tools on upper platen 5000 Rpm/1 kW dimensions : 2770x1370x1790h mm - 2850 Kg Meldas 635 LC Control - Iemca Boss 432r/32L barfeed new in 2002
item-No.: 130882696
Longitudinal travel (X) 10,000 mm. Transversal travel (and) 1,500 mm. Vertical travel (Z) 3,000 mm. Automatic head 45 ° 360,000 6,000 Rpm head output direct 3.000 Rpm Advances fast axis X 10,000 mm/min Advances fast axis and Z 15.000 mm/min Number of tools in magazine 100 Cone SK 50 DIN 69871 - AD Power head 37 Kw. 80 Kva Total installed power Year of manufacture 2000 Table rotating table 3000 x 3000 mm dimensions Rotation (A) 360,000 positions Permissible maximum weight 30 tons. Course cross 1,500 m ...
item-No.: 130882667
This machine performs the function of wrapping in automatic system. The drag or introduction of the product is done through blades or tape synchronized with the welds, giving a perfect termination with equal margins in both short and long objects, making the minimum changes. Speed: 12 packs/minute
item-No.: 130882664
? Brand Gemini. ? Model GHT5-G2-1000 x 4000 Year of manufacture 2006 ?. ? Distance between points 4000 mm. ? Diameter over cross slide 680 mm. ? Diameter over bed 1000 mm. ? S1/S6 30/37 main motor power Kw ? Torque 4500/5625Nm. ? CNC Siemens 840 d ? bench 550 mm width ? points from the Guide flat 500 mm height ? Weight approx. 10,100 Kg. ? piece between points 4,800 Kg weight. ? main shaft hole diameter 104 mm. ? Nose DIN 55026-11 main shaft. ? in front bearing shaft diameter 150 mm. ? Diameter of  ...
item-No.: 130806160
Mobile master band saw. Top stock.
item-No.: 130182455
-
BN 15.000 €
country-pt PT
Nitrogen tunnel 600 mm wide x 7000 mm long. Excelent condition. New SS belt. 3x 380 V
item-No.: 129758393
-
2.000 €
country-de DE
2 x 5 t earrings with flatbed, ground well with new press platens, instantly ready to go
item-No.: 129431201
-
18.000 €
country-es ES
Universal milling machine with automatic movement ram. Table size: 1700mmx600mm. Longitudinal travel: 1200mm. Cross travel: 700mm. Vertical travel: 530mm. ISO50. Hure head. DRO Heidenhain for 3 axis. Motor power: 10hp. Speeds: 12. (40-1800)
item-No.: 128740791
-
BN 175.000 €
country-de DE
Used centrifuge on mobile trailers 200 kW full hydraulic Performance speed: 2200 rpm Maximum operating speed: 1800 rpm Drum diameter: 909 mm Drum wall thickness: 18 mm Drum material: 1.7382 Max capacity: 740 dm³ Max. Density: 1.4 kg / dm³ Weight: 10,500 kg ready to use,. Includes: Panel, polymer conditioning
item-No.: 127937804
-
18.000 €
country-es ES
Universal milling machine with automatic movement ram. Table size: 1525mmx325mm. Longitudinal travel: 1050mm. Cross travel: 330mm. Vertical travel: 475mm. Ram travel: 550mm. ISO40. Hure head. DRO Fagor for 3 axis. Motor power: 7,5hp. CE. Year: 2006
item-No.: 127787424
Automatische Caracteristica:maquina für Klebstoff handhabt Anwendung für paquetes.Compacto der einspurigen, Maschine anpassbar an die meisten Transportmittel die tamaños.El Produkte Griff auf die Produkte aufgetragen. Anwendung Especificaciones técnicas:Sistema: Palette giratoria.Velocidad maximal: 42 Griffe / Klassifizierung und Trennung Erkennung carrete.Célula Ende Transportadores.Célula minuto.Integrado von Erkennung von Ende des Bestandes an etiqueta.Ancho Band: 25 mm.Longitud's Reel Tape: 5000m.Dimensio ...
item-No.: 127688122
-
97.000 €
country-at AT
FENDT 718 VARIO Pro S4 - very nice condition!, professional model - year: 09/2015 - operating hours: 4200 - EHR FRONT/rear - front power lift KAT.II - front PTO: pivoting 1,000 U/Min - sprung front axle - front fenders - motor brake - compressed air 2 Line unit for trailers - ABS 50 km / H version 4-wheel brakes, PTO 540/540E/1000/1000E, AdBlue, 4 x double-acting controllers back under pressure can be coupled - 1 x double control unit front - 1 x pressureless return back - 1 x return front -. Power-beyond (load-sen ...
item-No.: 127537245
-
5.000 €
country-es ES
Turret milling machine. Table: 1220x300mm. Longitudinal travel: 914mm. Cross travel: 382mm. Vertical travel: 419mm Variable speed head. Speeds: 60-500/500-4000rpm ISO40. Power: 2 hp. DRO Fagor.
item-No.: 127537136
-
8.000 €
country-es ES
Surface grinding machine. Magnetic chuck of 605x310mm. Longitudinal travel: 630mm. Cross travel: 350mm. Wheel diameter: 350mm.
item-No.: 126635562
Manufacturer: Ampack Amman type: KF 1/4 (fully automatic carousel filler) Capacity: ~ 7,000 cups/h YOM: 1998 Filling: four-lane Cup diameter: 95 mm Consisting of: Cup hopper Cup disinfection 4 dosing units Possibility to install up to 6 dosing units Board trailers and sealing station (Date) Printer Exit conveyor Dimensions: 8.5 m x 2 m x 2.2 m
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)