545 results

similar results found in category trailers/low loaders

item-No.: 146400597
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! Description ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working. Technical details WORKING HOURS 70.000 ...
item-No.: 145809376
-
10.000 
country-us US
Type K2542 Manufacturer Voronezh Made in Russia Maximum force 1600 ton Slider stroke length 400 mm Unattainable-course 12 mm Number of courses of a slider per minute 16 rpm Number of single turn-on 12 rpm The closed height 870 mm Adjustment 220 mm Under-forginig plate From left to right 1600 mm From front to rear 1600 mm Thickness 650 mm Slider overall dimensions 1600×1600 mm Aperture in a table 1000×1000 mm Window dimensions in cheeks 1650×1650 mm Course of a rigid pusher in a slider 100 mm Fo ...
item-No.: 145752871
Flute laminating machine CA1300 Side register heel. The bottom feed stack can be adjusted for suction intensity from the touch screen, including an automatic cleaning system. The input pile has a non-stop system Monitoring by PLC with alarm in case of power supply error. Automatic gluing system that regulates not only the flow but also the recirculation. Features: · Max sheet size: 1300 X 1250 mm · Min sheet size: 400 X 400 mm · Thickness of the upper sheet: 175-600gsm / 145 - 450gsm Kraft · Botto ...
item-No.: 145752866
Folding machine 360 Touch screen Electronic variable speed drive Flat pile feeder, with head suction Compressor Rotary Suction Double Sheet System Antisound covers Stream delivery Machine specially designed for the folding of brochures, allows a minimum fold of 20 mm Spiral rollers (to avoid wrinkles) similar to MBO Module to launch the narrow folds to the 2nd unit (if machine has 2nd unit) Vertical delivery stacker for optional microfolding Technical specifications Max. Format: 360 X 850 mm  ...
item-No.: 145721899
GENERAl: Power plant configuration: Industrial Cogeneration Stopped at: 2011 Current situation The engine is stopped. MAIN EQUIPMENT GENERATING SET • Manufacturer: JENBACHER |YOC: 1998|Model: J612 GS NL| Output: 1500 kW|Unit: 1 Running hours: 55000 h. ALTERNATOR • Manufacturer: STAMFORD • Output: 1840 KVA|1472KW|400V SCOPE OF SUPPLY The following are integral parts of generators and groups needed for its implementation (gas inlet, energy outlet): • Generator (alternator, engine ...
item-No.: 145721889
GENERAl: Power plant configuration: Industrial Cogeneration Stopped at: 2011 Current situation The engines are stopped and ready to load. MAIN EQUIPMENT GENERATING SET • Manufacturer: JENBACHER |Model: JW 316 GS| Output: 827 kW| Units: 2 ALTERNATOR • Manufacturer: STAMFORD • Output: 1000 KVA / 800 KW / 400V SCOPE OF SUPPLY The following are integral parts of generators and groups needed for its implementation (gas inlet, energy outlet):  ...
item-No.: 145468812
-
60.000 €
country-es ES
CNC LATHE HAAS ST-30Y Including Haas Bar Feeder HAAS301 SWING DIAMETER Over Front Apron 806 mm Over Cross Slide 527 mm Over Tailstock 584 mm CAPACITIES Chuck Size 254 mm Max Cutting Diameter (varies with turret) 533 mm Max Cutting Length (varies with workholding) 660 mm Bar Capacity 76 mm Between Centers 762 mm  ...
item-No.: 145468811
-
85.000 €
country-es ES
Travels X axis 2134 mm Axle Y 813 mm Z-axis 762 mm Spindle nose to table (max.) 889 mm Spindle nose to table (min.) 127 mm SPINDLE Power max. 22.4 Kw Speed max. 7500 rpm Torque max. 460 Nm x 700 rpm Drive system 2-Speed Gearbox Ct cone or BT 50 Air/ Oil Injection Bearing Lubrication Cooled Liquid Cooling table Max length. tool (from calibration line) 2134 mm Width 711 mm Slots width in T 16 mm Wheelbase with T-slot 125mm Number of standard T-slots Max weight. on table (evenly distributed) 1814 k ...
item-No.: 145410955
Industry transporter KAMAG 1403S HS2(Germany) Made in 2011 Dead weight 32500kg Payload 147500kg Engine rating 190 kW Max. axis load 6x30000kg
item-No.: 144954499
Plant configuration: Cogeneration Current situation: Engines are stopped and ready for dismantling Generator Power: 2MW Year of manufacture: 1999 Engines JENBACHER 616/Power: 2MW/Units: 2 Hours of operation Engine 1: 30000 hours, year 1999 Engine 2: 30000 hours, year 1999 Maintenance History: Maintenance performed by Jenbacher Alternator Manufacturer: Newage Stamford Power: 690V/50 Hz/ 400V AC Phase 3 Reach The following components are integral parts of the generator and group, n ...
item-No.: 144925007
BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloi ...
item-No.: 144892510
Injection stretch blow moulding machines for PET bottles · Clamping force 100 ton · Height maximum of the bottle 350 mm · Maximum diameter of the neck 150 mm
item-No.: 144842745
Extrusion Blow Moulding machines up to 10L Container Size With Actual Configuration: 1 l Number Of Heads: 2 Material Type: PE Container Size (Max): 6 l
item-No.: 144842744
Extrusion Blow Moulding machines from 10 L Container Size With Actual Configuration: 0,75 l Number Of Heads: 3 Material Type: PE Container Size (Max): 5 l Number Of Stations: 2 Output Capacity: 450 Kg/H Extruder Type: Continuous Screw Diameter: 120 mm L/D: 24 Wall Thickness Control: YES Center Distance:215 mm
item-No.: 144820091
Speed: 14000 Year: 1995 Condition: Very good Features: PET bottle blower in very good condition, for 1.5l and 2l bottles.
item-No.: 144766642
Speed: 7000 B/H 1,5 L Condition: Very good Characteristics: PET bottle blower, 6-mold machine, can work from 0.33 l to 1.5 l, non-hydraulic fully electric machine, composed with a proforma lift and positioner, with SIEMENS brand automatic system and SIEMENS brand touch screen.
item-No.: 144766636
Speed: 5500 B/H 1,5 L Year: 2006 Condition: Very good Characteristics: PET bottle blower, 4-mold machine, can work from 0.33 l to 1.5 l, non-hydraulic fully electric machine, composed with a proforma lift and positioner, with SIEMENS brand automatic system and SIEMENS brand touch screen.
item-No.: 144667210
new
680.000 USD
country-br BR
caterpillar gas genset , low time work ( 50 hours ), complet BOP, warranty Thermosolutions 6 months
item-No.: 144667209
-
410.000 €
country-br BR
New, unused diesel/HFO engine, year 2015, excellent opportunit, no have alternator and turbocharger
item-No.: 144478919
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! Description ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working. Technical details WORKING HOURS 70.000 ...
item-No.: 144290213
Wellhead Connectors 18-3/4” High Capacity Collet Connectors Two (2) Cameron 18-3/4” Type HC High Capacity Collet Connectors, subsea wellhead connectors.One connector certified with valid certificate and the other connector certification just expired but can be recertified. Priced to sell at low price.
item-No.: 144290202
39.8 MW MWM TCG2032 V16 Natural Gas Combined Cycle Power Plant 38.845 MW MWM TCG2032 V16 Natural Gas Combined Cycle Power Plant. Commissioning began in November 2012 at the production facility. The MWM power plant has been meticulously maintained by OEM since installation with detailed service records on site. The power plant consists of eight (8) 4300 KW MWM 2032V16 Natural Gas Engines; each coupled to AVK Alternators for a total output of 34.4 MW. The natural gas generator sets operate at 1000 rpm, 11 KV, 5 ...
item-No.: 144290201
33 MW Wartsila Dual Fuel Power Plant 33 MW Wartsila 50 DF Dual Fuel Power Plant. Two (2) 16650 KW Wartsila 50 DF Generator sets, Year 2010, 514 rpm, 50 HZ, Natural Gas, Marine Diesel Oil (MDO), Light Fuel Oil (LFO) or Heavy Fuel Oil (HFO). The 50 DF has the fuel flexibility to switch over from one fuel to the other without power interruption. The technology is designed to allow the engine to operate on the poorest quality of diesel fuel. The versatility of the 50 DF makes it a leader in its class. The generator ...
item-No.: 144290200
33 MW Wartsila Dual Fuel Power Plant 33 MW Wartsila 50 DF Dual Fuel Power Plant. Two (2) 16650 KW Wartsila 50 DF Generator sets, Year 2010, 514 rpm, 50 HZ, Natural Gas, Marine Diesel Oil (MDO), Light Fuel Oil (LFO) or Heavy Fuel Oil (HFO). The 50 DF has the fuel flexibility to switch over from one fuel to the other without power interruption. The technology is designed to allow the engine to operate on the poorest quality of diesel fuel. The versatility of the 50 DF makes it a leader in its class. The generator ...
item-No.: 144290198
52 MW Wartsila 20V34SG Natural Gas Power Plant Six (6) 8730 KW Wartsila 20V34SG Gas Engines, Six (6) ABB Generators, Natural Gas, Year: 2006 and 2008, 11 KV, 50 HZ. The gas generators are offered with OEM overhaul and Wartsila warranty. The Power Plant has operated on peaking mode due to the low hourly demand. Service records, maintenance history, diagrams and documentation all available. Cooling system, Lubricating System, Control and Monitoring System, Electrical System, Pumps, Starting System, Exhaust, Ga ...
item-No.: 144065493
-
42.000 USD
country-br BR
low time work, 1000 kva @1800 rpm 50hz S/N SXC053XX Arr 273682
item-No.: 143892038
-
35.000 €
country-at AT
Manufacturer/Hersteller: Tecnokar Trailers Srl Semi-trailer / Sattelanhänger ( Stahlmulde) Material: aluminium Colour/Farbe: grey/grau Weight/Eigengewicht: 7200 kg Maximum permitted mass/Tech. zul. Gesamtmasse: 38.000 kg Total weigght/Gesamtgewicht: 38.000 kg Cargo load/Nutzlast: 30.800 kg Vertical load/Sattellast: 12.000 kg Maximum speed/Hochstgeschwindigkeit: 100 km/h Nr. of axes/Anzahl der Achsen: 3 Height/Laderaumhöhe: 4000 mm Length/Laderaumlänge: 12020 mm Date of registration/Erstzulassung:  ...
item-No.: 143892027
-
80.000 €
country-at AT
Volvo FH 16 4x2T 650 (Truck/Sattelzugmaschine) Used, but in excellent condition / Gebrauchtfahrzeug, aber in sehr, sehr gut Zustand. Mileage/Kilometerstand: 150.000 Power/Leistung: 488 kW (663 Pferdestärke) Capacity/Hubraum: 16.123 ccm Air suspesions/Luftfederung Registration Date/Erstzulassung: 01/2016 Weight/Zuggewicht: 8.729 kg Total weight allowed/Zul. Gesamtgewicht: 21.000 kg Fuel/Treibstoff: Diesel Exterior colour/Außenfarbe: Blau, metallic Emission class/Emissionsklasse: EURO 6 Equipped  ...
item-No.: 143842213
New Never Used Rolls Royce Siemens 6 stage gas compressor train and is still in the packing crates, year 2015, Flowrate: MMSCF/DAY 1.0133 BAR @15.6 degrees centigrade (44-0-50-0), Suction pressure at HP stage: 125 BARA, Available from a cancelled project
item-No.: 143823971
39.8 MW MWM TCG2032 V16 Natural Gas Combined Cycle Power Plant 38.845 MW MWM TCG2032 V16 Natural Gas Combined Cycle Power Plant. Commissioning began in November 2012 at the production facility. The MWM power plant has been meticulously maintained by OEM since installation with detailed service records on site. The power plant consists of eight (8) 4300 KW MWM 2032V16 Natural Gas Engines; each coupled to AVK Alternators for a total output of 34.4 MW. The natural gas generator sets operate at 1000 rpm, 11 KV, 5 ...
item-No.: 143561819
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working. Technical details WORKING HOURS 70.000 CLAMPING FORCE 2. ...
item-No.: 143434362
-
95.000 €
country-pt PT
QAC1100 twinpower 1000 kVA prime power (1.100 kVA stand-by) 2x Scania Engines COnteiner 20' Low hours and perfect running condition
item-No.: 143293955
-
62.500 €
country-es ES
General COGENERATION PLANT. Engines are currently stopped. MAIN TEAMS Generator • OUTPUT POWER: 1007 KW (c/u) • YEAR OF MANUFACTURE: 1999 Engines • MANUFACTURER: DEUTZ MWM Model: TBG 620 V12-K Units: 2 • Hours of operation: - Engine 1: 39000 h total. Year: 1999 - Engine 2: 47000 h total. Year: 1999 Alternator • MANUFACTURER: LEROY SOMER LSAC 50 UL12 • OUTPUT POWER: 1060 kW 50Hz ? 400 V AC PHASE 3 COMPLETE ELECTROGEN GROUP • Generator (alternator, motor and control panel)  ...
item-No.: 143246065
Current situation:Working. Generator • Output power:2700 kW • Year of manufacture: 2008/2009 Engines • Manufacturer: Jenbacher Model: J620 GS SERIE E Output power:2800 kW Units: 4 • Hours of operation: - 4x motors:60000/68000 h total. Year of manufacture 2008/2009 • Maintenance history: - Maintenance by the filmmaker by Jenbacher. Alternator • Manufacturer: AVK • Output power: 6,3 kV 50Hz Phase 3 The following parts are integral parts of the engine and group for deployment.  ...
item-No.: 142307715
1 ITALMEC pick and carry crane type GRU T6, lifting capacity 6 ton., equipped with DEUTZ diesel engine type F3L912 with 54 HP at 2500 rpm, crane arm has following oscillation possibilities: up, down, left and right, the crane arm also drives out (255 cm + 145 cm), new battery installed in Fev-2019
item-No.: 142255812
4 ALDES duct fire damper type VRFI, duct diameter 315 mm, with thermal and manual trigger, these 2 fire dampers were installed in ducts of a blow room and their utility is to close and isolate ducts in case of fire
item-No.: 142255800
1 MATHIS continuous dyeing and finishing range for elastic and non-elastic ribbons type MTFJ-B, machine can work as pad-steam, pad-thermosol and pad-dry and/or pad-steam combined with thermosol roller width 200 mm working width 170 mm speed 1-14 m/min. drying temperature up to 200 ºC speed and tension control through frequency converters installation composed of (please observe red numbers above components in attached drawing): Pos. 1 MATHIS type PRE feeding unit with beater to keep ribbons loose at entr ...
item-No.: 142255788
1 SAURER HD-Assembley Twister, year 1997, double sided, each side 20 spindles = total 40 spindles, assembles 2 cables in to 1 cilindrical bobbin traverse 10" for feeding SAURER Two For One Twisters type TRITEC, inverter controlled, with ELECTRO JET travelling blower 2 SAURER Two For One Twisters type TRITEC TT300 240 spindles each, year 2000, inverter controlled (no wheel change needed),
item-No.: 142255786
1 KUSTERS 2 bowl calender, type 212.50-2600, year 1992, 260 cm face roller width, 240 cm working width, upper bowl steel thermal oil heated diameter 400 mm, lower roll racolan S-roll diameter 435 mm,
item-No.: 142255784
9018-25 7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system, year 1984 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system, year 1984 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system, year 1984 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system, year 1984 1 machine diameter 3", gauge 10, 92 nee ...
item-No.: 142255657
-
4.500 €
country-es ES
GENERATOR DIESEL Main power: 50KVA, 40Kw; Voltage: 380/220V; Model: LU-50, revolutions: 1,500 r.p.m., Frequency: 50Hz, Phases: 3; Diesel engine: Model: ZH4100ZD, engine: 4-cylinder, water-cooled with radiator, 4-stroke, direct injection; Maximum power: 41kW.; Aspiration: turbo sucked in; Compression ratio: 19; Consumption: 239g/kw.h; Starter system: 24V electric; Motor speed adjustment: mechanical; sound level:
item-No.: 141268383
-
7.900 €
country-es ES
DIESEL LUCLA GLU-110-SH Power: 88kw/110Kva; Voltage 400/230v; Revolutions / Frequency: 1500 rpm / 50 Hz; Power: (KW/KVA) 88/110; Voltage, phases and wiring: 400/230V, 3 phases and 4 wires; Power factor: 1/230 0.8/400; Soundproofing Type: Soundproof; Dimensions: (LWH) (mm) 290011001580; Weight: (kg) 1450; DIESEL ENGINE Model: R6105AZLD Engine features: 6-cylinder, water-cooled, 4-stroke, direct injection; Maximum power: (kw) 121; Aspiration: Turboaspirated Bore(mm)xStroke(mm) 105 x 130; Compression ratio: 16:1 Consu ...
item-No.: 140175440
STRATASYS FORTUS 450mc 3D PRODUCTION SYSTEM -YOM: 07/2015 -Installed new in 2016 -Working hours: 3730 h. Product description: High performance FDM system. It allows to build precise and repeatable parts at high speed using a large part of the standard thermoplastics that are used in traditional manufacturing processes. It produces fasteners, fixings, factory tools and end-user parts as well as functional prototypes capable of passing more demanding tests. With four layer thicknesses to choose from, ...
item-No.: 140174765
200 tons ENGEL 2-shot tie bar less injection moulding machine with rotary table on moving platen. Machine will be tested, repaired and checked and can be shown under power ! Description ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table 900mm diameter. 2 core pullers in fix platt, Neumatic Valves, electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic sequential. Machine reconditioned in our workshop of Santander, you can see it working. Technical details WORKING HOURS 70.000 CL ...
item-No.: 140174763
300 tons tie-bar-less IMM built in 2008 with CC 200 control, integrated Engel robot ERC 33/2-F, crane for mould fixing (2tons), 16 hot chanel, accumulator for fast injection and parallel movements. 2 core puller fix platen, flow meter, transport belt. Plastizising screw bimetalic. Technical details DAYLIGHT MAX 1.300 mm MIN. MOULD HIGHT 400 mm YEAR OF BUILDING 2008 WORKING HOURS 73506 INJECTION PRESSURE 1.616/2.053 bar INJECTION VOLUMEN 511 cm3 NOMINAL CAPACITY OF PUMP MOTOR 45 kW TRAVEL OPENING 900 m ...
item-No.: 139877733
Triblock filling for water, soft drinks, isotonic. Electronic flowmeter filling system. In format from 0.33 to 3 liters, mouth 38, currently in rectangular 3-liter format. Tweezers system. Very little use time in perfect condition, line for 10,000-12,000 b / h.
item-No.: 139876087
Characteristics: High production maker (up to 25 boxes / minute) automatically forms cardboard boxes,by a new system of bilateral positive opening "patented system", which ensures the perfect opening and squared of the boxes, eliminating the friction between the flaps and thus guaranteeing, a totally safe opening of the box even in square boxes formats (same length and width), no need to make cuts in the angles of the inner flaps of the boxes, unlike other forming systems that do not allow these square formats to  ...
item-No.: 139876067
Characteristics: Machine is an automatic sealing glue warm, ideal for incorporating in end of line, with Melton glue, upper flap closure with glue, lower tail flap closure, built entirely in stainless steel. The boxes are transported by motorized bands with independent speed control.
item-No.: 139876063
Format: From 1/3 l to 5l Year: 2000 Condition: Very good Characteristics: PET bottle blower brand SIDEL SBO 1, with PLC brand SIEMENS, molds from 1 l, machine formats 1 / 3l, 0,5l, 1l, 1,5l and 5 liters.
item-No.: 139875180
Husky Injection Molding for PET Preform Machine from 2011 Neck Type: 30/25 Preform weight max: 14 g. It also includes three molds (out of the following six molds): - Flex HyPET 16-cavity mold, 42.7 g, CSD PCO 1881 - Flex HyPET 16-cavity mold, 25.7 g, CSD PCO 1881 - Flex HyPET 16-cavity mold, 34.0 g, STD 30/25 - Flex HyPET 16-cavity mold, 14.0 g, STD 30/25 - Flex HyPET 32-cavity mold, 17 (A) g, STD 30/25 - Flex HyPET 32-cavity mold, 36.7 g, CSD PCO 1881
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)