1804 results

similar results found in category trucks/roll-off tippers

item-No.: 146534160
-
1.800 €
country-nl NL
Hubtische / Scissor lift 1,7 x 2,7 Meter Platform size 1.7 x 2.7 meter Minimal height 30 cm Maximal height: 1.57 meter Excluding hydraulics. excluding operating panel.
item-No.: 146493397
Controller: M-730BM(MAPPS4), Screen 19 Inch Axis X-axis travel mm: 315 Z-axis travel mm: 875 Y-axis travel mm: 120 Max turning diameter mm: 500 Max turning length mm: 721 Turning diameter over bed mm: 1.000 Rapid traverse X, Z, Y mm/min: 30.000 / 30.000 / 10.000 Main spindel Spindle rpm: 4 - 1.500 Spindle Nose: A2-15 Spindle hole mm: 185 Spindle drive power kW: 37 / 30 Chuck ø mm/inch: 457 / 18 Upper Turret Tool places number: 12 Tool height mm: 25 Indexing time sec .: 0.1 Rotary tool sp ...
item-No.: 146453847
Perfecting 2/3 5/0 RCI: Remote Control Desk PPL (Semi-Automated Plate Changing ) Ink. Temperature Control Grapho Metronic Temp Control Airglide Delivery Grafix powder suction system Technotrans Cooling Device Roland Deltamatic Dampening Grafix Powder Device Kersten Antistatic Device on Feeder Steel plate on feeder and delivery Automatic Impression Cylinder Washing Device with Brush Automatic Blanket cylinder washing device Automatic Ink Roller wash up device CIP 3 Densitometer 225 Mill impressions  ...
item-No.: 146414022
TECHNICAL DATA: Drive: Diesel Traction: 4 x 4 Total power KW: 41,7 Technical type: telescopic boom Carrying capacity kg: 3500 Stroke mm: 4350 Weight Kg: 5500
item-No.: 146373597
-
20.000 €
country-pt PT
Automatic Continuous baking oven – for fully automatic production of wafer sheets (refurbished) - 18 cooking plates/baking tongs - Plates dimension: 230 mm x 290 mm - Baking plate. It is possible to produce simultaneously a wafer with grid 5.0 x 0.8 mm and a wafer with grid 7.0 x 1.0 mm; - Main drive with frequency- controlled three phase drive system - 2 burners (Krom Schroder model ZKIH) with complete piping (forced fresh air and gas), cutting and mixing valves, gas inlet Krom Schroder with all accessor ...
item-No.: 146358856
4 Colors (straight) IPC system (Integrated Press Control) API II Control Console SEMI APC (semi automatic plate change) IR DRIER BALDWIN Automatic rollers wash up device FASTWASH Automatic impression wash up device Automatic Blanket wash up device Speed 16.000 sh INK TEMP. ROLLERS CONTROL MITSUBISHI DIAMOND DAMPENING SYSTEM GRAFIX MEGATRONIC S Original ONLY 115 mll turns (first owner) CIP 3 PRESET Electronic doble sheet control Chromed cylinders NON STOP feeder and delivery TECHNOTRANS BETA C AIR ...
item-No.: 146301177
TECHNICAL DATA: Drive: Battery Technical type: Forklift Carrying capacity kg: 2500 Stroke mm: 4000 Passenger seat: Yes Cabin: Open Functioning
item-No.: 146286286
TECHNICAL DATA: Drive: Diesel Technical type: Forklift/lateral Carrying capacity kg: 3000 Lifting hight mm: 4000 Passenger seat: Yes Cabin: closed Weight Kg: 12.000
item-No.: 146092692
35 Bales Per Hour plant for sale, 2 161 Continental Gin Stands, converted to Vandergriff 181, installed in 2016. Independent seed tube and picker roll drives. Lumus model 700 feeders, new controls installed 2015. Samuel P361 strapper Samuel Jenglo automatic bagger. 3 Continental 24D Lint Cleaners. 2 Super-Jets. Complete drying system.
item-No.: 146092618
year 2009 - hours 5500 - 2ton - duplex- side shift - height 3350 mm
item-No.: 145852366
Heidelberg Speedmaster SM74-5-P2+L year 2004 CP 2000 Autoplate Alcolor dampening Technotrans refrigeration Auto roller wash Auto blanket wash Auto impression cylinder wash Dedicated Coating unit Standard delivery Weko powder spray device Heidelberg IR Dryer 108 mill impres In production Available inmediatly Very nice and clean machine More info at info@imagraf.es
item-No.: 145781932
-
7.900 €
country-de DE
Unbenutzte Steinstapelzange Kinshofer Typ KM 332V-1100/Palfinger Typ PZS110V-1, Baujahr 2017, Eintauchtiefe 1.100 mm - 1.650 mm, Traglast bei min. Eintauchtiefe 1.900 kg, Traglast bei max. Eintauchtiefe 1.350 kg, Eigengewicht 330 kg, Anpressschienen. 7.900,00€ + 19% MwSt. Verkauf nur an Gewerbetreibende! Ohne Gewähr für die Angaben! Zwischenverkauf vorbehalten! Es gelten ausschließlich unsere Allgemeinen Geschäftsbedingungen! AVG Trucks GmbH Gwinnerstraße 36 60388 Frankfurt am Main Telefo ...
item-No.: 145752866
Folding machine 360 Touch screen Electronic variable speed drive Flat pile feeder, with head suction Compressor Rotary Suction Double Sheet System Antisound covers Stream delivery Machine specially designed for the folding of brochures, allows a minimum fold of 20 mm Spiral rollers (to avoid wrinkles) similar to MBO Module to launch the narrow folds to the 2nd unit (if machine has 2nd unit) Vertical delivery stacker for optional microfolding Technical specifications Max. Format: 360 X 850 mm  ...
item-No.: 145752204
EUROFOLD 235 Year: ±2006 High pile feeder Counter with batch programming Digital control panel Exit ladder belt Rollers in good condition, recently made 2 folding bags
item-No.: 145752202
Stahl Quickfolder T34 Year: 2000 Format: 340 mm 2 Fully automatic folding bags Suction machine with built-in compressor Rollers in new condition More photos availables Ask for price and more information
item-No.: 145579150
-
3.850 €
country-hu HU
Lifting height: 5,35m Capacity: 1,6t Work hour: 3294h Without charger
item-No.: 145366756
Electric forklift FIMSA type ET 40.12 Force 40 q.li Max height travel 5250 mm Manufacture year 1999 Forks length 1200 mm Triplex upright Forks extensions 2000 mm
item-No.: 145366600
Materialbreite 1.500 mm Materialdicke 0,50 – 2,00 mm Coilgewicht 15,0 to. Blechlänge 200 – 6.000 mm Coilinnen – Ø 500 mm Coilaußen – Ø 1.700 mm Geschwindigkeit max. 40 m/min. Arbeitsrichtung links ? rechts Anlage bestehend aus: Bundhubwagen Abwickelhaspel / Andrückrolle angetrieben Tragfähigkeit 15,0 to. Überleittisch Richtmaschine Anzahl – Richtrollen 17 Richtrollendurchmesser 55 mm Anzahl – Stützwalzen 6 (3 x oben/3 x unten) Stützwalzenanstellung elektrisch Schlingengr ...
item-No.: 145265759
-
60.000 €
country-es ES
Wrapper line with strapping machine for sale. Composed by: - 2 units of horizontal strapping of the brand RODICED, model FH-VK20 - Plastifying brand THIMON CP 6240.2 - Pallet conveyors with rollers of the brand MECALUX Year of manufacture 2008.
item-No.: 145265705
-
60.000 €
country-es ES
Cutting trolley: Brand Schnell Model: BAT 65/2/12 Year: 2005 Equipped with 2 automatic benders with control center. Brand: Schnell Model: Robomaster 40/12L Year: 2002
item-No.: 145047635
Installation, Inbetriebnahme, Schulung: inklusive Konfiguration: - Edelstahl (AISI 304) Wasserbecken für hohe Beständigkeit - KMT – 4.000 bar Hochdruckpumpe SL-VI, Schneidkopf und Hochdruckkomponenten - Öl/Wasser-Kühlung mit geschlossenem Kreislauf für Hochdruckpumpe - TCI HIDROSYSTEM 2.0 – Wasserenthärter zur Schonung der Hochdruckkomponenten - LANTEK – CAD/CAM Software 2D Expert - LANTEK – CAD/CAM Software Modul für Schrägschnitt - TCI 5X DD 4.0 – Schneidkopf für Schrägschnitte (2,5D)  ...
item-No.: 144976641
Gepflegter 4- Rad- Elektrostapler: Hersteller: Linde Modell: E30H - 01 / 600 / H2X 387 Baujahr: 2011 Betriebsstunden: 8.650 Std 80- Volt- Batterie aus 11 / 2016, sehr guter Zustand Tragfähigkeit: 3.000 Kg Leergewicht: 3.910 Kg Hubhöhe: 3.300 mm Bauhöhe: 2.300 mm Gabellänge: 2.200 mm neuwertiges Stabau- Anbaugerät ( Gleitschienen neu! ) mit Zinkenverstellung und Seitenschieber Voll- Freihub Duplex- Mast Vollkabine mit Heizung nicht kreidende Hallenbereifung Arbeitss ...
item-No.: 144954534
-
40.000 €
country-it IT
Pre-owned Iveco Magirus Stralis model AD 440 S 45 T/P roll-off tipper truck: It is equipped with the following: - Crane LIV 10.68 NP N. 4471 - Guimatrag BL20 Nr. 18401” hook for roll-off containers First registration date in Italy: : 23/04/2012 First registration date in Country of origin (Germany): 04/12/2007 Mileage: 700 000 km Regularly checked, can be picked up at anytime. Price is EXW 36100 Vicenza, Italy
item-No.: 144892716
-
698.500 €
country-de DE
1 IPSEN Type RVF(AvaC®)-524(FV) - 3 bar abs. double-chamber vacuum furnace with forced gas cooling for horizontal loading, with continuous thyristor/ transformer heating control • Work space (W x L x H): 610 x 910 x 610 mm • Max. gross weight of load: 800 kg • Heating chamber • Operation temperature range: with convection heating 500°C – 850°C with vacuum heating 500°C – 1320°C • Ultimate Vacuum: < 10-2 mbar range • Operating Vacuum Range:
item-No.: 144842746
Stapler ist in einer Auktion! siehe auktion.umrath.com Insolvenz- Verwertungsauftrag: Elektro- 4- Rad- Frontstapler Hersteller Toyota Type und Baujahr unbekannt mit Ladegerät Hubkapazität - GESCHÄTZT - 2.000 kg ( kein Typenschild auffindbar ) mit Ladegerät 48 Volt Stapler lässt sich aufladen, es muss aber davon ausgegangen werden, dass die Batterien verbraucht sind Alle Funktionen am Stapler wurden kurz gestestet, Fahren, Heben, Neigen funktioniert  ...
item-No.: 144842739
Double-shaft film slitter-rewinders Working Width: 1050 mm Materials: PP PP + PP PET + PE PP + PET MET PP + PET MET + PE Paper Paper + PE Parent Roll Diameter: 1000 mm Final Roll Diameter: 800 mm
item-No.: 144842710
Bottom weld bags on the roll Welding Width: 700 mm Cycles Per Minute: 300 U/min
item-No.: 144810444
new
1.600 €
country-it IT
Code: 0011 Brand: LIFT Model: ET4008 - CE Standard Lift table for lifting and lowering loads at desired heights in safe conditions for the operator - Year 2009 - Ce Standard Fields of application: wood, plastic, glass, sheet metal, ceramics, aluminium and various materials Table mm 2200 x 1800 Capacity kg 4000 Max height mm 1300 Motor Kw 2,2 Weight kg 655
item-No.: 144766901
Box weight controller Year: 2016 Condition: New Characteristics: Weight control machine for box, cadence 35 units / minute, new.
item-No.: 144662823
-
6.000 €
country-es ES
Izpe 300H threader Diameter max rollers: 160mm Car max stroke: 235mm Max threading diameter: 70mm Threaded min diameter: 3mm Roller spindle diameter: 54mm Max length threaded to plongé: 120mm Triangular thread max step: 5mm Triangular thread min pitch: 0.5mm Dimensions: 1580x1400x1240 1300Kgs Hydraulic motor power: 3hp Motor power rollers: 7.5hp
item-No.: 144585536
second-hand ZEYTIN OIL PROCESSING LINE Brand PIERALISI Renewal Date: 2018 Crusher capacity:96 TN / day. Each blender has 3 bodies weighing 2200 kg. Decant : 120 TN / day capacity and in 2018 the same manufacturer was rebuilt by PIERALISI (as guaranteed). The centrifuge is a P6000 (6000 L/hour), the best model produced by PIERALISI. 1 Boxes Scale Underground scale - To weigh boxes of olives, with digital weighing marker 2 Receiving hopper 900 / 1000 kg Underground hopper 3 Belt Conveyor ASIGRA ...
item-No.: 144500607
-
22.000 €
country-es ES
Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.
item-No.: 144458382
Arbeitsbühne Hersteller: Power Towers Typ: Nano SP Plus Baujahr: 2015 Arbeitshöhe max.: 4.50 m Plattformhöhe max.: 2.50 m Reichweite mit Auslegerplattform bis Geländerrand: 1.00 m Korbabmessung – Ausleger eingefahren: 1.00 m x 0.73 m Korbabmessung – Ausleger ausgefahren: 2.00 m x 0.73 m Grundfläche: 1.19 m x 0.75 m Zulässige Tragkraft: 200 kg (1 Person plus Werkzeuge) Manuelle Kraft max.: 200 N Neigung bei Betrieb max.: 0° Gewicht inkl. Nutzlast max.: 550 kg + 200 kg = 750 kg Arbeitsberei ...
item-No.: 144290211
25 MW LM2500 SAC Cogeneration Plant Complete LM2500 power plant with steam turbine and all auxiliary equipment. The turbine has only 2500 hours since new, year 2001, 50 HZ. The turbine was operated for a short time before being placed in storage. It has been in stored in a climate controlled warehouse. The turbine has had a recent boroscope done and is in very good condition, you may need to freshen up the bearings but the complete plant is in remarkable condition.
item-No.: 143956627
-
6.500 €
country-es ES
Universal milling machine cover FP1 with 3 - axis active digital display TNC123 Heidenhain and stepless feed Universal milling machine cover FP1 with 3 - axis active digital display TNC123 Heidenhain and stepless feed Technical specifications: Fixed angle table already mounted on the machine Speed: 40 - 2000 rpm Feed stepless in 3 axes Rapid traverse in 3 axes Drive power: 1.5 / 1.9 KW spindle brake Travels X / Y / Z: 300/160/340 mm Weight approx. 800 kg Accessories and equipment: 3-axis digit ...
item-No.: 143892027
-
80.000 €
country-at AT
Volvo FH 16 4x2T 650 (Truck/Sattelzugmaschine) Used, but in excellent condition / Gebrauchtfahrzeug, aber in sehr, sehr gut Zustand. Mileage/Kilometerstand: 150.000 Power/Leistung: 488 kW (663 Pferdestärke) Capacity/Hubraum: 16.123 ccm Air suspesions/Luftfederung Registration Date/Erstzulassung: 01/2016 Weight/Zuggewicht: 8.729 kg Total weight allowed/Zul. Gesamtgewicht: 21.000 kg Fuel/Treibstoff: Diesel Exterior colour/Außenfarbe: Blau, metallic Emission class/Emissionsklasse: EURO 6 Equipped  ...
item-No.: 143876077
ROTARY Feeder ( new belts) Digital counter 4 POCKETS FIRST UNIT (complete new rollers) 4 POCKETS SECOND UNIT (complete new rollers) 2 POCKETS THIRD UNIT (complete new rollers) Shingle belt delivery Very good conditions Complete cleaned, prepared and checked, ready for test Available immediately
item-No.: 143859049
Year 1999 Size 37 x 52 cm. ALCOLOR CP TRONIC PRESET AUTOPLATE Plus Version CHROMED CYLINDERS INK REGULATIONS Podwer spray Mediprint GS Sheet decurler All washers device (rollers, impression and blanket cylinders) Free of damages on cylinders or gears Cleaned and checked
item-No.: 143842213
New Never Used Rolls Royce Siemens 6 stage gas compressor train and is still in the packing crates, year 2015, Flowrate: MMSCF/DAY 1.0133 BAR @15.6 degrees centigrade (44-0-50-0), Suction pressure at HP stage: 125 BARA, Available from a cancelled project
item-No.: 143738067
Stapler Still EFG R14 Bj 1975 1,5ton Hubgewicht + Hubhöhe: 3430mm Batterie: 40Zellen 80V 360Ah (1180kg) Ladestation Neuwertige Reifen Gesamtgewicht inkl. Batterie: 3140kg Gabelzinken: 900x100x35mm 2 Flyerketten: 5/8x28 Fahrschalter defekt!
item-No.: 143717560
Schubmasstapler Hersteller: Wagner Typ: EFSM 160 TE Baujahr: 1992 Betriebsstunden siehe Bild im Anhang. Der Stapler wurde regelmäßig gewartet. Batterie ist defekt und der Sitz hat einen Riss. Hubmast kann abmontiert und anderweitig verwendet werden. Ansprechpartner Herr Mueller Schauen Sie auch unsere weitere Angebote an. (Aenderungen und Irrtuemer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten!)
item-No.: 143678442
-
1.950 €
country-gr GR
Hello and thank you for looking. For sale a used Still stapler without battery. Please contact me for additional information.
item-No.: 143434391
-
20.000 €
country-pt PT
500 kVA prime power (550 kVA stand-by) Engine: perkins Alternator: Leroy Somer 24 hour running fuel tank Super silenced canopy Comap Parallel controller Motorized circuit breaker Good running condition
item-No.: 143434297
-
35.000 €
country-pt PT
600 kVA Prime Power generator (660 kVA Stand-by) Engine: PERKINS Alternator: LEROY SOMER Comap parallel controller Motorized circuit breaker Maintenace history Good running condition
item-No.: 143318342
Seitenstapler, Tragkraft 5 T, TiSteinbockschbreite 1400 mm, Verkauf im Kundenauftrag.
item-No.: 142671022
-
1.590 €
country-de DE
DOOSAN LEDH 20M Niederhubwagen - Komissionierer Tragfähigkeit 2000kg Gabellänge 1150mm Nur 958 Betriebsstunden Mit Ladegerät
item-No.: 142670903
- hydraulic fork positioner & sideshift - 5 ton forklift - several units available
item-No.: 142627392
3 x IMPIANTI CONTINUO (ISOTEX) COATING HEAD. YEAR 1990 WW 1.700 MM KNIFE OVER ROLLER TYPE (OVEN NOT INCLUDED)
item-No.: 142627387
CALATOR UNROLLING MACHINE ROLLER WIDTH 2.700 MM PORTABLE. TO BE USED AS UNROLLING MACHINE FOR KNITS IN FRONT OF A COMPACTOR OR ANY OTHER MACHINE. WITH E+L METAL DETECTOR
item-No.: 142580051
1 MCS hydraulic dyeing jigger type Maxi Jigger 3400, roller width 340 cm, working width 320 cm, maximal winding diameter 1400 mm, year 1989, maximal dyeing temperature 98 ºC, dye cycle controller TERMOELETTRONICA type JTronix JP70tc,
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)