beverage machines used for sale (2,151)

Single head semi automated cask filling machine, that incorporates isinglass finings dosing. Manufacture : Microdat Model: CF55 Year of Manufacture: 2013 Single phase For more information and more available stock please visit us at - advancedbrewing.co.uk

Moravek CW Carbonator & Bottle Filler. Twin-head machine. Various Prices as we currently have a few in stock. - Please Enquire Product is carbonated immediately product prior to filling. Range of bottle sizes from 0.2 litres to 2 litres capacity. Filling of glass bottles and P.E.T. bottles. Filling still or carbonated product. Suitable for a wide range of beverages including beer, wine, soft drinks, mineral water, cider and champagne. Simple to operate and flexible. Capable of carbonating at ambient temperature. Available with additional chilling, if required. Compact. Occupies minimal floor space. Integral product pump. Simple to change bottles sizes. All stainless steel construction. This is a second hand machine offered in good condition. For more information and more available stock please visit us at - advancedbrewing.co.uk

Velo 40cm x 40cm Filter Frame with Pump Second Hand Manufacturer: Velo acciai Model Type: SF44NDF Serial No: 13789 For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Can filler Leibinger Type Canvasa Capacity: approx. 1.000 cph set up for standard cans - can type: 211 / 202 without can table with Siemens S 7 control system Counter pressure filling technology O2 Pickup: 10-60 ppb The machine has the footprint of a standard Euro pallet. The Canvas is a compact, semi-automatic can filling machine. Suitable for carbonated and still drinks. The filler is still in production in a brewery until July 2026 and can be inspected during production.

Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7 

- With chassis - Belt length, between axles: 6'500mm - Belt width : 300mm - Motor: 400V, 50Hz - With large inlet hopper attachment - Dumping height : approx. 1200mm - Hopper width: 1000mm - With rack and pinion winch - In good condition

8-fold cartridge filter housing with new filter elements on request for an extra charge

A 3-compartment filter housing is sold On request and for an extra charge with new filter elements

A Kematec MBK 1 AR clocked rotary bottle capper is available. On-site viewing is possible.

6 pneumatic valves, 22 mm in diameter

GRACO pneumatic pump used in a pharmaceutical factory, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI, Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI , Max Flow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO , LPM: 9.5, MOC: 2.5, MPa: 1.2, bar: 12, PSI: 180, Max air WPR: 1.2 MPa / 12 bar / 180 PSI, MaxFlow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO

GRACO pneumatic pump, ATEX, Max flow: 9.5 L/min / 2.5 GPM / 5:1 RATIO , Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Maxflow: 9.5 L/min / 2.5 GPM / 5:1 RATIO, Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI , Max air WPR: 1.2 MPa / 12 bar / 180 PSI

(Exhibition model) - Material : DIN 1.4301, upper bottom and dome made of DIN 1.4404 - Surface, inside: III d, weld seams pickled and ground - Exterior surface : marbled - Capacity : approx. 2400L Dimensions : - Depth : approx. 1310 mm - Width : approx. 1080 mm - Cooling jacket height: approx. 1750 mm - Height of the shelves : approx. 450 mm - Total height : approx. 2570 mm Equipment : - 4 adjustable feet - Rectangular manhole 420x320 mm - Residual drain with disc valve NW40, Fredrich no 2 NW40 - Clarification drain with ball valve NW40, Fredrich no 2 NW40 - Stand display - Sampling - Thermometer, digital - Double jacket with piping pulled upwards - Labeling board - Ladder bracket - Dom NW 300 Vent Nozzle NW 50 - Crane straps

with 200 mm adhesive height Running direction: left - right Frequency-controlled

Blowing machine KRONES Contiform S 8 year of manufacturing: 2003 capacity: 14.000 bph neck size: PCO 28 - 1881 Bottle size: 1,5 ltr. PET bottle incl. cooling unit incl. preform feeding system incl. preform container incl. preform tilting device air conveyor system is available immediately available in Germany The machine is in a good condition.

Running direction: left - right with safety cladding Capacity: 1,500 - 7,000 bph including glue pump Top condition

PET Aseptic filling line Sidel There are 2 capacities: 18.000 ltr./h and 27.000 ltr. / h - depending on the bottle sizes Capacity: 36.000 bph by 0,5 ltr. and 0,4 ltr. 18.000 bph by 1,5 ltr. Year of manufacturing: 2006 - 2025 Aseptic line produces aseptic products and has been operating since 2006. All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. The line includes processing area (mixer, pasteurizer and aseptic tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak. Over the years, all main elect ...

On behalf of our client, we are selling this KHS Blomax 16 PET blow molding machine which is designed for the automated production of PET bottles. It ran together with 2x KHS Absofill / ABF 710 machines before (one of these 2 also sold by our , .hamburg-machinery/listings/7469327-used-aseptic-pet-bottle-filling-ma chine-khs-innosept-absofill-abf-710-03). It is dismantled ± 8 years ago and is stored since in a closed warehouse. The client bought the machine used and decided not to blow bottles themselve, but buy them from another supplier, already blown. This bottle blower is direct available. Loading on the truck / inside the container will be done by the dairy factory., The machine was used to blow PET bottle for a fruit juice factory in Germany. Capacity: 28.800 bottles/h. Bottle size: min. 200 ml and max. 2.000 ml. Current bottle neck nominal diameter: 38 mm. With the same nominal bo ...

PET filling line Krones capacity: 16.000 bph by 1.500 ml product: still and carbonated water bottle sizes: 500 ml / 1.000 ml / 1.500 ml label: 3 labels and wrap around label OPP packaging: 3 x 2 year of manufacturing: 2012 consisting of: Blowing machine Krones Contiform 8 including preform feeding Filling and capping bloc Krones Modulfill CIP system Varioclean AUT-5000L Inspection machine Krones Checkmat 731FM-X Bottle dryer Linardry S1M Labelling machine Krones Topmatic to label 3 labels and wrap around label OPP Packer Variopac to pack 3 x 2 = 6 pack Handle applicator Palletizer Modulpal for pallets 800 x 1.200 mm and 1.000 x 1.200 mm Stretch wrapping machine Robopack Sleeve labelling machine Krones Bottle conveyors, cap conveyor, pallet conveyors

Sleeve machine Berning Includes steam tunnel Includes heat-resistant modular belt Product diameter: 30–110 mm Sleeve length: 30–370 mm Full body: Max. 300 pieces per minute (depending on sleeve length) Suitable product materials: PP, PS, PET; HDPE Suitable sleeve materials: PET, PVC, OPS with hot melt Year of manufaturing: 2017 Function description: At an interface, the products are transferred from a conveyor belt and fed into the machine system. The incoming products run into the screw system, where they are separated. After separation, the sleeve is applied in the sleeving machine. The sleeve application is fully automatic. When the application is complete, the product is transported to the steam tunnel. In the steam tunnel, the product and sleeve material shrink until the sleeve has adapted to the contours of the product. After shrinking, the products a ...

1 of used dryig system, consisting of main assembly (hood with Tetra conveyor frame) with hood, Sonic Air Systems blower with Leroy Somer motor type 256TC / 3x 400 V / 50 Hz, 20 HP / 27.6 Amp. (with Danfoss VLT 5000 VFD in separate panel), and 3x Sonic Air Systems airknives each 3" body diameter and 610 mm slot length With manifold from 1 to 3 hoses. Hoses not available. Control panel not available (was switched from combined line conveyor control panel).

Tetra Pak TBA19 330 ml Prisma Filling Line General Information: - Manufacturer: Tetra Pak - Model: TBA 19 – Version 010V - Year of Make: 2003 - Capacity: 6,000 packs/hour - Filling Volume: 330 ml - Format: Prisma - Condition: Very good used condition Line Overview: Complete Tetra Pak filling and secondary packaging line for 330 ml Prisma carton packs, designed for reliable and efficient production in dairy and beverage applications. The line combines a proven Tetra Pak TBA19 filling machine with a brand-new cap applicator and a cardboard packer, ensuring modern functionality and high operational reliability. Ideal for producers looking for a cost-efficient, ready-to-install solution with upgraded components. Main Components: - 1. Filling Machine - Make: Tetra Pak - Model: TBA 19 – Version 010V - Capacity: 6,000 p/h - Volume: 330 ml - Format: P ...

ORTMANN + HERBST 100 / 20 Type Hansa B with 100 filling valves and 20head aluminium screw capper Pitch: 115 mm Capacity: up to 30.000 bph by 750 ml glass bottles Original year of manufacturing: 1994 The machine was complete refurbished in 2013 by company Hormes / Germany, incl. new electric system with Siemens S 7 and touch panel incl. new main bearing incl. new safety housing around the machine incl. two change part sets for 250 ml bottle and 750 ml bottle

Description The Krones Checkmat 731 (built in 2016) is a high-performance inspection system for quality control in beverage filling lines. The machine reliably checks the fill level, closure, label presence and other quality-relevant parameters. Thanks to its seamless integration into Krones' high-speed lines, it ensures consistent product quality and efficient rejection of defective containers. Specifications Manufacturer: Krones Model No.: Checkmat 731 Year 2016 Condition Used Stock number 103822 Current type and system AC 1/N/PE Voltage 230 V Frequency 50

Complete PET filling line Krones / Sidel Capacity: 33.000 bph Bottle size: 1,5 ltr. PET bottles Closure: short neck PCO 28 - 1881 Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm) Filling products: carbonated water and soft drinks Year of manufacturing: from 1997 - 2014 Condition: regulary maintained The line is out of production and immediately available. The line can be inspected. The line is consisting of: Blowing machine Sidel SBO 20 Serie III capacity: 36.000 bph year of manufacturing: 2010 neck size: PCO 28 - 1881 incl. cooling unit Trane-RTAC 185 year of manufacturing: 2003 incl. preform feeding: SIDEL-EBHS 2050 year of manufacturing: 2010 preform container: SIDEL-EBHS 2050 year of manufacturing: 2010 incl. preform tilting device SIDEL-EBHS 2050 year of manufacturing: 2010 incl. air conveyor system available Air co ...

A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible.

A fully automatic unscrewing machine M. Adelski is available. Unscrewing heads: 5, capacity range: 2000-12500bottles/h, working height: 1090mm, bottle types: NRW/Euro, bottle volume: 0.5l, machine dimensions X/Y: approx. 950mm/850mm, weight: approx. 1400kg, operating hours: approx. 8500h. Documentation available. An on-site inspection is possible.

A hot beverage filling and capping machine MBF is available. Filling stations: 35, capping heads: 4, bottle type: VdF, bottle volume: 1000ml/500ml, max. filling temperature: 95°C, screw cap: MCA aluminum standard, cap dimensions X/Y: 28mm/15mm, filling capacity: 7000bottles/h, bottle height (1l): 306.5mm, machine dimensions X/Y/Z: approx. 3400mm/2300mm/2600mm. Documentation available. On-site inspection is possible.