planing machines used for sale (501)

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Gubisch planer and moulder 172/7 S/N 3425 80 Year of construction 1980 Length of the dressing table 1950 mm Planing width maximum 170 mm Planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.Bottom dressing shaft 7.5 kW 2.Right joining shaft 3.0 kW 3.Left wave 4.0 kW 4.Right shaft 4.0 kW 5.Top Thickness shaft 4.0 kW 6.TopDickenhaft 5.5 kW 7.Uniwelle top / bottom 3.0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1.5 kW Feed speed infinitely variable 5 – 30 m/min. Weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical information subject to reservation

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz

working length: mmWorking width: mmWorking height: mmTGT Robby 420 universal, the glass mounting device for working withoutEffort The TGT Robby 420 420 universal is battery powered and itsTelescoping movements, crane arm forward (work 1,25 min front of the wheels), adjust large discs sideways exactly(100 mm to the right 100 mm to the left), and the lift head toTilt 60 ° and turn 180 ° upwards, are using aCable remote control made.Equipped with an Accusauganlage carrying capacity approximately 500 kgthe TGT Robby 420 universal is the safe response aid.Of course, the lift head can also be rotated 360 ° manually. moreoverThe lift head can be equipped with an articulated joint(Turn the disc completely sideways) to drive through narrow doorsto be able to.The TGT Robby 420 universal is also with a strong front-wheel driveequipp ...

Working width: 410 mmLength of the planing table: 2850 mmNumber of knives: 4 (Tersa) St.Motor output: 5,5 kWloading dimensions L x W x H: 2950 x 1260 mmweight: 870 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 4200 mmWorking width: 2500 mmWorking height: 850 - 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 3120 mmWorking width: 2451 mmWorking height: 750 - 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 3100 mmWorking width: ca. 3400 mmWorking height: 750 - 1000 mmHaberkorn return means for Umfälzautomat For frame from 300 mm to 3000 mm for automaticReturn consisting of:First cross roller conveyor approx 3100 mm long-------------------------------------------------built-in conveyor belts for depositingthe wing on the cross roller conveyor withabout 10 mm strokeDriving speed of about 5-30 m / min.Roller diameter 80 mmRollers with PVC coatingGear motor with 0.37 KW2 Synchronized lifting device for cross roller conveyor-------------------------------------------------- ------------------------built-in rollers with stepless drive about 5-30 m / min.max. 100 mm strokeRoller diameter 80 mmRollers with PVC coatingSynchronous storage of GG 25hardened gears and rods2 pneumatic cylinder 80 x 100 mmadjustable stops (top - down )Synchronization via shafts and bevel gears3 longitudi ...

working length: 6000 mmWorking width: , mmWorking height: , mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mmWorking height: 3,300 mmMotor output: 7,5 kWNumber of knives: 4 St.Feed speed: 7 + 14 m/min.loading dimensions L x W x H: 1070 x 1200 x 1060 mmweight: 1050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

working length: 2451 mmWorking width: 1670 mmWorking height: 800-1000 mmNeue Haberkorn Rückfördereinrichtung nach Vierseitenhobelmaschine----------------------------------------------- --------Förderanlage für Holzlängen von 300 mm-4200 mmPos.1 Längs-Quer-Länsförderer ca.2451 x 1670 mm- höheneinstellbare Stützböcke (ca.800 mm - 1000 mm)- stufenlos angetriebene Rollenbahn ca.5-25m/min, - Rollendurchm.50mm, 140mm Rollenmantellänge- Übergabe auf Querförderer durch Heben-Senken der Rollenbahn - Querförderer mit 6 Stck. Traversen- Förderbänder 50mm breit, in Kunststoffbahnen geführt- Antrieb ca.5-25m/min, 0,37 KW- ca.1250mm von Anschlag zu Anschlag- Übergabe als Hebesenkeinrichtung- angetriebene PVC beschichtete Stahlrollen, Durchm.50mm, 140mm Mantellänge- Antrieb ca.5-25m/min, 0,37 KW- Rollenabdeckung nach HBGPos.2 Förderband ca.3000 x 260mm- höheneinstellbare Stüt ...

CATALOG NUMBER 5843 TECHNICAL DATA - shaft width 510mm - 3-knife shaft - shaft cover - length of the tops 2530mm - cast iron tops - both adjustable tops - cast iron guide adjustable at an angle - 3kW engine - dimensions length / width / height 2530x900x1000mm - weight 897 kg ADVANTAGES - Italian production - used planer - intended for professional use Net price: PLN 11500 Net price: EUR 2738 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041

Planing machine Weinig hydromat H30 W baujar 1990 36m/min Working width 300mm working-high 200mm memeeser of the fresspindel 50mm with suction

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

TECHNICAL DATA: Working width mm: 230 Planing height mm: 120 Infeed table length mm: 3500 Number of spindles: 6 Spindle configuration: 1 B: 5,5 KW 2 R: 7,5 KW 3 L: 7,5 KW 4 T: 7,5 KW 5 B: 5,5 KW 6 T: 5,5 KW Spindle diameter mm: 40 Feedrate m/min: 6-36 Rotation speed max rpm: 6.000 Soundproofing cabin: Yes Feeding magazine Weinig - PHV - 2004

20-27-518 Reismusas WOODLAND MACHINERY (new) Type MOTO530 Max. Working width 530 mm Max. Working height 300 mm Max. Cutting depth 8 mm Engine 4kW/380V/50Hz Dimensions of the Working table 1050x532 mm Spindle rotation speed 4800 rpm Min. Working length 280 mm Knives 4-30x530x3 Electrical filing 0.5 kW Electric height adjustment 0.33 kW Feed speed 5-20 m/min Transport Dimensions Weight 835 kg

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

Type MB104H Max working width 400 mm Knives 4 Feed speeds 7/14 m/min Min./max. working height 3,5-300 mm Main motor power 4 kW Suction hood diameter 100 mm

Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $22,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic ...