planing machines used for sale (523)

Number of boring spindles: 4 St.Working width: 230 mmWorking height: 160 mmFeed motor: 11 kWFeed speed: 60 m/min.Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of timber including infeed mechanization Weinig High Mech E 1.The machine has a Memory Plus system with electronic positioning (radial) of the spindles 3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 7 St.Working width: 220 mmWorking height: 120 mmtotal power requirement: 42 kwFeed motor: 7,5 kWPlaning and moulder Weinig type Unimat 22 E for four-sided planing and profiling of timber incl. shuttering protection cabin, suction pipes and planing heads.Two driven rollers in the table.The machine is function-tested, dismantled and ready for loading.Spindle 1: Bottom / 5.5 kW / 40 mmSpindle 2: Right / 4 kW / 40 mmSpindle 3: Left / 6.5 kW / 40 mmSpindle 4: Right / 5.5 kW / 40 mmSpindle 5: Top / 4 kW / 40 mmSpindle 6: Bottom / 4 kW / 40 mmSpindle 7: Top / 5.5 kW / 40 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

planing width: 30-260 mmplaning height: 10-200 mmnumber of spindles: 6 Weight: 6650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 510 mm, 2500 mm, 4 St.

Martin T51 Surface Planer – Classic from the 60s | 4-Knife Shaft | overhauled at handover For sale is a Martin T51 surface planer, a real German machine classic from the solid cast iron era of the 60s. These machines stand for extremely smooth running, precision and durability – exactly what many modern machines often no longer deliver. ⸻ Technical data & equipment: • Model: Martin T51 • Year of construction: approx. 1960s • 4-knife shaft • Solid cast design • Precise dressing tables with good flatness ⸻ Condition: • Machine has been tested • Technically fully functional • Signs of wear due to age (purely visual) New knives are used at handover → ready for immediate use Approx. 1200 KG - Forklift available for loading.

heavy thickness planer Paoloni S 515 Planing width 510 mm Planing height 250 mm Electric height adjustment with 10th button for precise positioning 4-Knife Safety Planer Shaft Table led four times Main motor 4 kW Feed rate 5, 8, 12.5, 19.5 m/min Steel - Pull-out roller Link pressure beams made of solid aluminium material Under-table roller Year of manufacture 1997 CE conformity Machine is WORKSHOP TESTED in VERY GOOD CONDITION From stock Lieboch 

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

Key data: 4 , 600 mm, 300 mm

FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...

Number of knives: Z2 V2 width: 17 mmcircle diameter: 160 mmmaterial: Stahl : WP Bore diameter: 40 mmJointing rebate cutter Weinig type 530 160 01 / 2 08 for use on the planing spindle of Weinig planing machines.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 250 mm, 5 kW

Thickness planing machine Planing machine Thickener MARTIN TYPE: T41 Planing width approx. 630 mm Passage approx. 250 mm 4 knives planing shaft wedge bar shaft safety knife shaft infinitely adjustable feed speed 8-20 m/min. Articulated pressure beams Rubber feed and rubber pull-out roller Extraction connection: 140 mm Dimensions: 1000 x 1100x 1200mm Soft start control Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are a guideline, depending on the distance and unloading option they may vary. The items can be picked up by yourself or shipped at the expense of the buyer. The item offered is offered with differential taxation. The sales price shown is the  ...

Key data: 5 , 300 mm, 125 mm

Four-sided planing or pre-planing machine Right machine, operation left The machine is especially suitable for planing and pre-planing slats. The floating vertical units in lightweight construction are optimally designed for the processing of curved goods. Short set-up times and fast dimension changes are made possible and guaranteed by the flexibility of the machine. The machine has 5 working spindles, with the following arrangement: [1] [2] [3] 1. Horizontal Down 2. Horizontal top 3. 4. Vertical left/right ( opposite ) 5. Scoring saw at the bottom TECHNICAL DATA Work dimensions Working width: 50 - 300 mm() Working thickness: 30 - 125 mm Working length: min. 1,800 mm Table height: 1,100 mm Feed speed: 50 - 250 m/min. Working thickness up to 160 mm possible with appropriate tools on the vertical spindles. Minimum planing width 50 mm possible with tool D≥250  ...

- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/ 4000-12000min, 4th spi ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 150 mmLength of the planing table: 2000 mmFeed motor: 5,5 kWFeed speed: 7-36 m/min.uper SWT 23 XL-6 Four-Sided Planer-----------------------------------------------Machine fully functional tested!... Working width min/max: 18 - 230 mmWorking height min/max: 8 - 150 mmSpindle configuration:1st Spindle - bottom-----------------------------------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 240 mmPulley diameter: 160 mmAdjustment: axial and radial, manual2nd Spindle - right------------------Power: 5.5 kWSpeed: 6,200 rpm, incl. brakeSpindle diameter: 40 mmSpindle length: 160 mmPulley diameter: min. 110 mm - max. 200 mmAdjustment: axial and radial, manual, via mechanical digital displayAdjustment: vertical 35 mm below Table3rd Spindle - Left------------------Power: 7.5 kWSpeed: 6,200 r ...

planer, electric planer-Manufacturer: Black & Decker, electric planer type SR 600-Speed: 14500 rpm-Nominal power consumption: 500 watts-Dimensions: 400/150/H140 mm-Weight: 3.3 kg

LEDINEK high speed planer, type Superplan 2V-S300, Manufacture year 2018, Machine specifications, - Working width 50 - 305 mm, - Working height 10- 80 mm, - Feed speed 60 - 300 m/min, Spindle layout:, 1. Horizontal spindle bottom, motor 45 kW, 2. Horizontal spindle top, motor 55 kW, - Upper part can be quickly adjusted with 4 lifting columns, - 2 driven feed rollers in the upper part of the machine, - 2 driven feed rollers in machine stand, - Feed speed with frequency converter, - Control panel with digital positioning controller for thickness, - Incl. tooling and accessories