strapping machines used for sale (142)

Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (stock new, 4 x transport belts/belts new). Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Drive-on on 4 x transport rollers with locking levers Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.

Type : S300 Rotating table diameter : 1500 mm, 1650 mm, 1800 mm, 2200 mm Capacity : 2000 kg Distance between column and rotating table : 500 mm Wrapping height : 2100 mm x 2600 mm x 3100 mm detected by photocell Table rotation regulated by inverter Table rotation stop position controlled by sensor Customisable film carrier speed Film carrier anti-fall device Work cycles controlled by PLC and electronic cardboard

- 2 x charging batteries with charger - 1 X electr. Closing - Welding Machine - Operating instructions - Normal traces of use - works without problems - Mobile, flexible, easy to pallet - No bending, back-friendly

: 150 kgweight: ca. 70 kgdimensions: ca. 940 x 500 x 800 mmSEMI-AUTOMATICContinuously adjustable strap tension: 5–500 NUp to 15 strapping cycles per minuteStrapping triggered automatically when the strap is inserted or via foot pedalHeat-sealed closureLoad capacity: 150 kgMinimum product dimensions (W x H): 45 × 20 mmHeight-adjustable · Ergonomic operationClear control panel, · Easy operation from both sidesNo protruding controls · Strap tension adjustable via the keypadFinely adjustable strap tension from 5–500 NStrap widths 6, 9, 12 mm · Versatile applicationEasy access · Tape spool can be replaced quickly and easilyThe drive motor runs only duringthe strapping process · Energy-savingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cyklop CI-89 2002

TECHNICAL DATA: Rotating platform: Ø 1500 mm Wrapping with stretch film Working height: max. 2500 mm Manual adjustment and operation Electronic scale: max. 1500 kg

TECHNICAL DATA: Weld seam width: 11 mm Heat welding Passage height: 590 mm Passage width: 640 mm 01 Bobbin holder

Mosca RO-M-P5 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding Odometer reading: less than 930,000 strapping Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Mosca RO-M-P4 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding Odometer reading: less than 2,950,000 strapping Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Mosca RO-M-P4 Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically Optional equipment: version with ultrasonic welding Odometer reading: less than 2,500,000 straps Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Banding / Banding Machine ATS Tanner Type US 2000 AB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven technology. Strip tension infinitely adjustable via potention meter/rotary regulator. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

length: ~ 450 mmwidth: ~ 650 mmheight: ~ 1.100 mmBattery-powered hand strapping tool BW-03 with 2 x battery, charger and Cyklop dispenser and 2.5 rolls of strapping.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Top and bottom case sealing / taping machine with average production output up to 1000 boxes per hour / 16 boxes per minute and box transfer speed: ·~22 mt/min ~22 mt/min; side mounted drive arms; handwheel for adjusting height. Comes with outfeed roller conveyor. Suitable for cardboard boxes and cases of following sizes: L: 150mm (min) - max (not set) W: 100mm (min) – 500mm (max) H: 100mm (min) – 500mm (max) Tape width: 25mm to 50mm (max), max foil roll DIA: 360mm, reel DIA: 76mm, fitted with Emergency Stop button. Year: 2011 Machine is in excellent overall condition with little use – originates from and established Pharma production site in Europe. Size: L: 1.800mm x W: 1.200mm x H: 1.600mm; W/T: 300kg; comes with stainless steel roller conveyor (machine size: euro-pallet x H: 1.500mm, W/T: 40kg);

Banding / Banding Machine ATS Tanner Type US 2000 LB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven and universally applicable (see video below). Versatile, infinitely adjustable via two potention meters/rotary controls in terms of belt tension and belt length. Tape can be added later via pressure switches if necessary. Counter currently shows around 740,000 work cycles. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

Strapper, Mosca, RO-TR700-4 – used - : Price from location: only 3.500.-€ (net) from location! Manufacturer: Mosca Type: RO-TR700-4 Year of Make: 2004 Item no. 75151 Channel size: approx. 70cm × H: 56cm 3L-N-PE, 400V, 1.5kW, 2.5A, Control voltage 24V, DC However, the band used – bandwidth can be changed with a conversion kit: Belt length: approx. 4,500 m per roll Band width: approx. 8 mm Band thickness: approx. 0.45 mm Sleeve: approx. 200 mm Material: Polypropylene (PP) Colour: black Condition: good, trim sheet is missing Available: immediately Location: Frankenberg camp / Saxony

A Cyklop strapping machine is being sold. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee

Offered is a fully automatic strapping machine for PP strap, year 2006. The machine has defects. Electronic strap tension control 50-450N, polypropylene (PP) strapping band width: 12mm, core diameter X/Y 200mm/280mm, heat-seal joint, cycle performance 30 strappings/min, package dimensions X/Y: min approx. 100mm/30mm, machine dimensions X/Y: 1450mm/600mm, working height: 800mm, weight: approx. 220kg. Inspection possible by arrangement.

A fully automatic side-seal strapping machine Joinpack is available. Load capacity: 50kg, speed: approx. 24rpm, strap width: 9mm/12mm/15mm, strap material: PP, strap tension range: 15kg/70kg, frame opening: 600mm/850mm, sealing height: 650mm. Machine dimensions X/Y/Z: approx. 1450mm/600mm/850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Mobile semi-automatic stretch film wrapping machine. Incl. integrated battery charger.

The machine originates from a high-profile pharmaceutical & cosmetic manufacturing plant (part of a large Pharma group that operates 18 industrial sites and 3 development centres located across Europe). Year: 2008 Excellent condition with little use. 3M-Matic™ Adjustable Case Sealer 700a-s is as a used case sealer, designed to seal the top and bottom centre seams of up to 30 cartons per minute. Working Description: Fully guarded construction-suitable for demanding Pharmaceutical and Food grade manufacturing areas Stainless steel construction for use in corrosive and high moisture environments Equipped with 3M™ AccuGlide™ SST Taping Heads designed to apply a C” clip of Scotch® pressure-sensitive type film box sealing tape to the top and bottom centre seam of regular slotted containers. Adjustable top and bottom belt drive syst ...

C(2 x CAM G35 available - In Stock) Originates from a high-profile pharmaceutical plant in Europe. CAM G35 automatic bundler overwrapper for individual boxes and bundles (single layer and stack up). Working Description: Suitable for boxes, cartons, trays or other square shaped products. Can be used with the following materials: foils (cellophane, PP, others) - and kraft paper. Technical Information: Format range - for individual boxes: width 20mm to 300 mm, height 10mm to 90mm, length 50mm to 200mm; package/bundle of boxes: width 50mm to 300mm, height 30mm to 150mm, length 50mm to 300mm. Mechanical speed: 6 to 35 strokes per minute. Siemens S7-300 PLC Control Pannel. Manuals included. Machine size: 2700mm x 1600mm x 1750mm high, approx. weight 1850kg

ATS MS 420 S banding roller; cleaned and tested; Frame size 420x210mm; Belt width 50mm; Automatic operation possible; suitable for paper and foil; including 85 rolls of material paper white. Banding machine ATS MS 420 S; cleaned and checked; frame size 420x210mm; band width 50mm; automatic using possible; used for paper or foil; included 85 rolls banding paper.

Ultrasonic Banding Machine ATS US 2100 AB; tested and maintained by ATS Germany support; Belt width 75mm; Frame 430x205mm; 2-fold print mark control for printed material; fixed strap length adjustable; Arc air; suitable for paper or foil. Ultra sonic banding machine ATS US 2100 AB; checked by the support of ATS Germany; band width 75mm; frame 430x205mm; Double Print Mark Reader; fix band lenght possible; airing for the frame; used for paper or foil.

Length : 1430 mm Width : 620 mm Height : 1540 mm Shrink tunnel : (l)850 x (h)600 mm Kind of strap : polypropylène Strap width : 12 mm

SPECIFICATIONS: Rotary table: Ø 1500 mm Wrapping with stretch film Working height: max. 2900 mm Electronic adjustment Installed power: 3 kW

GETRA STRAPPING MACHINE - IN WORKING ORDER - SUPPLIED WITH 10 SPOOLS OF STRAPPING

Pester PEWO-fold 1 Compact overwrapping machine for single cartons and carton collations in OPP-, PVC-, PE-materials, foil width from 90 mm to 230 mm, film thickness from 0.015 mm to 0.050 mm, maximum reell diameter 350 mm, reel core diameter 76 mm, size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, carton infeed with turning star (turns the cartons by 90°), machine controlled using ELAU PacDrive C400, electrical connection 3x400V, V+N+PE/50Hz, power consumption 5.2 kW, current consumption 12.5 A, Operating pressure 4 bar, infeed/outfeed height approx. 900-950 mm, output infeed conveyor up to 150 cartons/min., output up to 60 cycles/collations per minute, machine floor space approx. 2970 x 1600 mm (LxW), machine height approx. 2150 mm, machine net weight approx. 1800 kg.

Canapa SAP 8 LA strapping machine Fully automatic strapping machine With integrated transport system - photocell-controlled In the SAP-8A/LA fully automatic machines, photocells detect the beginning and end of the package, control the transport unit (driven rollers or belts) and trigger the strapping process. More items - new and used - can be found in our shop! International shipping costs on request!

SPECIFICATIONS: Operation of the machine with rotating ring, diameter mm: 400 Installed power: 2.7 kW EQUIPMENT: 01 Roller conveyor for loading 01 Roller conveyor for unloading

Orgapack Cordless strapping tool, type OR-T 260, incl. quick:charger and battery.