welding machines used for sale (1,733)

Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / perforated tableincluding accessory set WMT Basic-Set 2.0The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3)Surface hardness 850 VickersSurfaces that have been ground down and planed smooth.Hole diameter: 28mm, countersunk by 3mm100 x 100mm gridSide panels 200mmHole spacing in the side panels 50mm, diagonal gridHeight adjustable from approx. 830 - 890mmSubstructure reinforced with 140 x 15mm flat steelIncluding base bearings, 110mm diameterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 980 mm: kgweight of the machine ca.: 0.95 tWorkstation- Hole diameter: 28 mm- Grid: 100 x 100 mm- Side panels: 150 mm- Panel thickness: 10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 93 Positionenweight: 320 kgcondition: neu : 28 mmdimensions: 1,0 x 0,6 x 0,85 mSpecial 93-piece set, 28mm systemIncludes tool trolleyMaterial: Burnished high-quality steelScope of delivery: see imagesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 102 Positionenweight: 320 kgcondition: neu : 28 mmdimensions: 1,0 x 0,6 x 0,85 mSpecial 102-piece set, 28mm systemIncludes tool trolleyMaterial: Burnished high-quality steelScope of delivery: see imagesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 80 Positionenweight: 150 kgcondition: neu : 28 mmdimensions: 0,8 x 0,6 x ,05 mSpecial 80-piece set, 28mm systemMaterial: Burnished high-quality steelScope of delivery: see imagesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 10 Stk.clamping range: 25 mm: 28 mmweight: 10 kgdimensions: 0,3 x 0,3 x 0,2 m10 Quick-release clamping bolts- 28mm hole system- for 25mm table thicknessThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser Cutting Machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of Make: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous area of application: Cutting acrylic glass Laser source was renewed 5 years ago

YASKAWA MOTOMAN AR2010 robotic welding station was built in 2020 in Japan by Yaskawa Electric Corporation. The system is specially designed for precision arc welding of workpieces. The machining process is performed by a YASKAWA 6-axis robot, distinguished by, among others, its clever design and robust arm with an increased range of movement. An arm reach of 2010 mm and a payload of 12 kg enable the welding of large and complex structures, while maintaining a high dynamic and repetitive process. Thanks to its compact, slightly curved design, the robot achieves excellent efficiency even in a small amount of space. This solution also eliminates the risk of collision with the workpiece or peripheral equipment. Each of the six axes is driven by powerful servo motors in order to achieve excellent dynamic movements combined with high process reliability. All cables, on the other hand, are r ...

A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026.

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible.

Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible.

An industrial TIG welding power source Merkle in AC/DC version is available. Insulation class: S, Cooling: AF, Voltage: 400V, Power factor: 0.95. Documentation available. An on-site inspection is possible.

A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.

A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.

1,1 Kw. 400 v. 50 Hz. With suction arm 3 m, hose type, internal joints. 3 units available.

PEMA HPS 3500 & TPS 3500 welding positioner was built in 2021 in Finland by Pemamek Oy Ltd. The system consists of two, extremely versatile machines – the HPS 3500 headstock and the TPS 3500 tailstock with a combined payload of 7 tonnes. This solution is dedicated to lifting and rotating long workpieces, making it ideal for the production of, among others, wind towers, trailer frames or tubes. Both machines can work together or independently. The stepless height adjustment ensures precise adjustment of the working parameters to the dimensions of the workpieces. Technical specifications of the PEMA HPS 3500 & TPS 3500 welding positioner - maximum payload: 7 t (headstock 3.5 t + tailstock 3.5 t) - rotation speed: 0.06-1.3 rpm - tilting axle height adjustment range: 700-1500 mm - work table plate diameter: 950 mm - T-slots on work table plate: M20 DIN508 (4 pcs.) - maximum torque ...

KAWASAKI BA006L welding robot was built in 2019 in China by Kawasaki Precision Machinery (Suzhou) Ltd. The machine designed for arc welding of workpieces is distinguished by its robust arm, high precision and reliability. Each of the 6 axes is driven by powerful servomotors that guarantee excellent movement speed and dynamics. All cabling, on the other hand, is routed inside the through-hole wrist to minimise the wear and the possibility of cable interference with peripheral devices. The KAWASAKI 6-axis robot weighs 160 kg. KAWASAKI BA006L works with a two-axis, electrically driven welding positioner. The device rotates and tilts workpieces during the process, enabling the welding of even the most complex shapes. Both axes are controlled continuously from the robot controller. The robotic welding station is fully complete and consists of the following components: – robot arm: KA ...

Camfil filter unit CS 610 for industrial extraction systems Manufacturer: Camfil KG Model: CS 610 lacquered Type: Filter unit for industrial extraction systems Article number: 518110 Serial Number: 000442739182 Number of units: 2

Offer 26070 Technical data: - Max. load capacity in horizontal position 7500 kg - Face plate dimensions 1500 x 1500 mm - Face plate motorized swivel 0 - 120 ° - Rotary movement electr. infinitely variable 0.0028 - 1.04 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V x 25 kW - Table height in horizontal position approx. 1600 mm - Handheld remote control - Space requirement approx. W 2000 x H 1600 x D 2450 mm - Weight approx. 5500 kg

400 V, with constant temperature control, with adjustable air volume and digital display for the air volume. For 40mm overlap with Cekom plug, with tension indicator, incl. wooden box. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 40 mm Weight: 57 kg Colour: green Dimensions: 740 x 480 x 470 mm Machine number: 1501221760

working area: 500x300 mmwork height max.: 100 mmWeight: 120 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SKS PF5 Wire Feeder and FPM8i Component Package Manufacturer: SKS Welding Systems Device type: Wire feeder devices and system components Total quantity: 14 pieces PF5-LEA 10-2-9: 1 piece PF5-L 10-2-21: 2pcs PF5-R GFS 10-2-104: 1 piece PF5-L GFS 10-2-108: 3 pieces PF5-L 10-2-8: 5 pieces FPM8i 10-13-200: 2 pieces Design: Industrial MIG/MAG wire feeders Wire drive: 4-roller system Scope of delivery: Wire feeder devices according to the above parts list

Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible.

A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026.

Welding Fume Filter, Tebaron, TE 1200 – used - : Prices from location: 650.-€ (net) Manufacturer: ISI Industrie-Produkte GmbH Type: TE 1200 Year of Make: 1991 380V, 1.1kW, 2.6A, IP54 Rating: good Available: immediately Location: Waltrop

CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately