window production machines used for sale (173)

0: 2750 mmWorking height: 2500 mm0: 300-1000 mmRUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022-----------------------------------------------------Vertical work table with lifting device and turning device. EspeciallySuitable for glazing and sealing wooden windows on both sides.Furnishing:System part covered with feltInfinitely variable pneumatic lifting device,Stroke of 300 mm - 1000 mm, based on roller conveyor heightTurning device for sealing on both sides, with roller conveyor 150 mmroll length2 pneumatic tensioners for clamping the window to the turning deviceVersion with special turning device for pushing through the on theRoller conveyor set up window with applied (closed)turning deviceEquipment demonstration machine, alternative/optional equipment on request!Pos. 1.0: Item no.: 1000000RU-SW3-90° vertical work table forWooden window with turning device forG ...

Dimensions (L,W): 1400 x 1750 mmWeight: , kgtiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4---------------------------------------Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazingEquipment demonstration machine, alternative / optional equipment on request!Pos. 1.0: Article no .: 8820000RU-MKS-1,4 assembly tilting tableBasic dimensions 1400 x 1750 mm, extended 3400 x 2500 mmSupport surface with 3 support bars, 2 of which are adjustable,one permanently mounted on the upper extension,covered with felt. Support surface with width andHeight / depth pull-out. Pneumatic tilting device,Payload 130 kg. Actuation via foot valve.Roller conveyor can be folded down manually and pulled out to the sidefrom 1400-2500 mm, roll length 140 mmclosed. Roller conveyor height in verticalTable position adjustable from 300-380 mm,Ho ...

max. tool diameter: 400 mm: 180 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

max. tool diameter: 400 mm: 310 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

0: 3.700mm, 5.100mm, 6.100mm mmWorking height: 160 mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !

I sell the Fensterbau Profil Umfälzautomat Zentrum Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 4 pcs. available. Condition very good !

SPECIFICATIONS: - Automatic workpiece blocking pneumatically controlled - Machine for the execution of slots of different lengths and depths for window parts, folding shutters and doors

SPECIFICATIONS: 45° glass strip saw Machining area mm: 2,700 x 1,000

SPECIFICATIONS: Machining center for final processing and assembly of fittings on windows and doors Dimensions workbench mm: 2,800 x 1,250 Three-spindle drilling unit for grip holes Pneumatic system for reading and cutting window handles "Cremonese" Tilting workbench Complete with pneumatic screwdriver

saw blade diameter: 370 mmcutting range round: 115 mmcutting range square: 105 mmcutting length min.: 730 mmcutting range flat: 70 x 240 mmcutting lenght max.: 4000 mmsaw blade turning speeds: 1250 / 2500 U/mintable rotating: 180 °stroke: 120 mmfeed stepless: 0 - 500 mm/mincoolant: capacity 45 degrees: square: 95 mmcapacity 45 degrees: flat: 50 x 200 mmcutting speed: 1250 / 2500 m/minweight of the machine ca.: 1,1 tdimensions of the machine ca.: 5,00 x 1,30 x 2,00 m- Fabr. - No.: 28232 und 28233- pneunatic clamping head- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 5000 mmWidth: 750 mmHeight: 3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung------------------------------------------------------ ----------komplett wie folgt :- Fahrbare Ausführung- Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert.- 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung- Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet- pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen fürnur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm.Dübellänge : min. 25 mm. – max. 60 mm.Tiefeinsetzen = 30 mm.Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung fürelektronische Dosierung in Verbindung ist, gespritzt .- Flexibler Arm mit Gegengewicht zu ...

: 3000 Working height: 2500 mm: 300-800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3400,4550 mmWorking height: 2500 mm: 300 - 800 mmGlazing and control pressRU-VGP3Glazing and sealing press, clamping width max. 3150 mm,Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm,Pressing beam height 2400 mm, plant part covered with felt, installation surfaceas roller conveyor, lifting device from 300 - 800 mm. Left and right eacha role as edge protection for elements up to 2500 mm height.(When ordering specify whether RIGHT or LINKER Pressbar mobile!)alternatively:-------------RU-VGP4Glazing and control press, version like RU-VGP3however span max. 4000 mm, length 4550 mm(When ordering specify whether RIGHT or LINKER Pressbar mobile!(technical data according to manufacturer - without guarantee!)Price on request !The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 2700 mmWidth: 770 mmHeight: 1250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: - mmprofile spindle: - Stückmain drive: - kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 5200 mmWidth: 1200 mmHeight: 900 - 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - mmWeight: - kgadjustable height (yes/no): ja 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor output: , kWautomatic: , Table dimensions: , mm! Please notice the VIDEO of this unit ! For window producers we recommend a spinde with 40 mm diameter and 160 mm usable length, Tools should have inside diameter of 110 to 120 mm Attached the description with options as pdf-file. Price list on request! For window production the manufacturer recommends following options of price list: Art.-Nr.bo1000 base unit Art.-Nr.bo1050 protection Art.-Nr.bk0180 arc marker Art.-Nr.gt0250 glazing bead construction 1 lengthenning : bo1720 ot bo2510. (technical details according to manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 4500,6000 mmprofile spindle: 3 Stückmain drive: 24 kWControl: Siemens 840d Working Process Logos Life Evo XS 2345-------------------------------Vollautomatisches CNC-Fensterfertigungsanlage mit automatischerBe- und Entladung.2 Portale mit 3 Frässpindeln mit 4- und 5-AchstechnologieCNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität undProduktivität128 WerkzeugplätzeNEU:Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie fürkleinere Betriebe!Nebenstehend finde Sie aktuelle Videos dieser Baureihe.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Götzinger Power Drill in special version with dübelleim and press-in stationWith the Götzinger PowerDrill, you can choose:- Drill the front and long sides- Doweling of doors, seatings, fighters- The drilling patterns are freely programmable- You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads- You can: lock casings, pusher and PZ as well as 3D tapes and drill- The machine has a horizontal and a vertical milling unit- A simple control lets you create drilling and milling programs, Save and recallPOWER DRILL - drilling and milling machineUniversal drilling machine for drilling olives, corner bearings, dowel workOn the front and the front, milling, lock boxes, tapes, etc.Base in stable design, covered with sheet metalTable top 1800 x 200 mmProcessing u ...

Table dimensions: 1000,400 mmpneumatic clamping: 2 St.moveable: Option For quick pressing of Minizinken- or Soflineverbindungen- Independent of the angle- Particularly suitable for arched manufacturing in window- Table size 1000 x 400 mm- Pneumatic connector 10 bar- Air consumption: 0.5 cdm / stroke- Two clamping cylinders for workpiece clamping- Right half of the table stored on hardened shafts via linear ball bearings- 1 pressure cylinders for linear displacement table- CE - execution(technical data according to manufacturer - without guarantee.!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 3200,5100 mmprofile spindle: 1 Stückmain drive: 12 kWControl: Beckhoff CNCNumber of axles: 5 St.Masterwood Project 385 CNC-Bearbeitungszentrum---------------------------------------------5- Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, TreppenKurze Zusammenfassung:---------------------------------------------Arbeitsbe reich:X = 3200 mm (Optional 5100 mm) , Y = 1500 mm, Z = 200 mm1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme1 Stk. fest installierter Bohrkopf mit 19 Spindelnmit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtungmit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtungmit 2 doppelten Horizontalbohrspindeln X-Richtungund 1 doppelte Horizontalbohrspindel in Y-RichtungSägeaggregat in Bohrkopf integriert27 Werkzeugwechselplätze:Karussellwerkzeugwechsler mit 22 P ...