Moulders WEINIG Unimat U 22A

WEINIG planer/moulder Unimat 22A with 9 heads
Year of construction: 1987
Serial number 222-896.

The planer is in good working condition and has been partially overhauled, cleaned
and subjected to careful technical controls.

• The machine has been thoroughly cleaned and technically checked.
• Some wear parts have been replaced.
• A test run was carried out to ensure functionality.
• The machine is bolted to a wooden structure and is ready for shipment.
• The planer and moulder is equipped with all the tools and is sold as such.

Further technical data of the machine:

Maximum planing width: 220 mm
Maximum planing height: 140 mm
Diameter of the spindles: 40 mm
Spindle speed: 6000 rpm
Length of the inlet table: 2 m

The machine has a total of 9 spindles with the following configuration:

1. Lower spindle / dressing spindle : 5.5 kW
2. Right spindle / joining spindle : 5.5 kW
3. Left spindle / vertcal spindle: 5.5kw
4. Right spindle / vertical spindle : 5.5kw
5. Top spindle / horizontal spindle: 7.5kw
6. Lower spindle / horizontal spindle : 5.5 kW
7. Top spindle: / horizontal spindle 5.5 kW
8. Lower spindle / horizontal C51221141 spindle: 5.5kw
9. Universal C51221141 spindle : 7.5kw

The feed rate is adjustable via a variator and allows speeds of up to 36 m/min.
The feed motor has a power of 5.5 kW.
The machine also has a central variable displacement motor with a power of 0.75 kW.
There are three drive rollers in the table for feeding and transport.
Drive via cardan shafts.
The planer is equipped with a table-top Waxilit pump for lubrication.

The dimensions of the machine are about 6.0 m long, 2.2 m wide
Weight approx. 6500 Kg


seller offer No. resale 161543679