window production machines used for sale (159)

SCM steep conveyors for transporting the glazing beads after the outlet of the SCM window system. The stone conveyor is 2.60 m. high with a 6 m. conveyor belt to transport a miter glazing bead saw The size is: 2.20 wide x 2.60 high with 1.20 feet made in stainless steel. Motor 7.5KW due to start-up The conveyor belt is 6.50 m. long x 100 mm wide in the channel.

OKOMA UF 2 S-1 automatic rebate machine with: 2 spindle right and 1 spindle left - Spindle 1 - Equal and counter-rotation 320 mm - Spindle 2 - counter-rotation 320 mm - Spindle 3 -Gegenlaut 320 mm Automatic left stop with programming

Length: 2700 mmWidth: 1100 mmHeight: 850 +- 150 mmengine output: 0,37 kWElectric capacity: 0,5 kwcompressed air: 6 barHorizontal impregnation system Pro flow for individual parts with rinsing circuit.---------------------------------Features:Machine for horizontal flooding of individual parts. The product will go throughflooded a row of nozzles. The excess product is then removed through air jetsblown off.The pump and the air nozzles are controlled automatically and only thenoperated when the workpiece passes through. In this way theCompressed air consumption reduced. The circulation operation ensures minimalproduct consumption.---------------------------------Construction features:structureSturdy steel frame, painted with high-strength, water-soluble products.Machine body made of heat-sealed, thick polypropylene plates.4 independent chambers for inlet, flooding, blow-off and outlet.Hori ...

Number of boring spindles: 3 St.Number of tools: 1.3/4.1. St.Spindle diameter: 50,40 mmSpindle length: 120,320,125 mmweight: 2500 kgloading dimensions L x W x H: 3800x1400x2000 mmtable length: 3470 mmWeinig Univar 6 Pto be sold on behalf of our customer----------------------Operating voltage: 380 volts, 50 periods.For milling around windows, doors and similar with uneven edgesProfiles.Arrangement of the aggregates:1. Synchronous spindle on the right, pneumatically clocked.2. Profiling spindle on the right3. Fitting spindleProfiling spindle suitable for holding several tools one on top of the other.Spindle movement pneumatic.The 1 spindle works in synchronization for tear-free milling. RespectivelyThis spindle plunges the last 100 mm of a frame end with theInsert the appropriate tool into the wood to prevent tearing at the frame cornersavoid.Machine stands, tables, stops:Machine body made ...

Manual hand unit: Nein J/NAutomatic for single pieces: Ja J/NAutomatic for frames: Nein J/NClip set 351 on the loose item------------------------------------Manufacturer description:- Base frame in stable welded construction- Clip container as tipping conveyor with separation and feeding the clips- Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment- Conveyor belt length approx. 4,000 mm as NC axis- Contact and clamping cylinder- Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered- Workflow automatically in flow--------------------------------------Technical specifications:- Screw height 50-120 mm- Profile length 350-3,500 mm- Table height approx. 950 mm--------------------------------------Total price of the machine ex works: on request!Freight costs within Ger ...

Code: 0060 Brand: SAOMAD Model: UTP 150/6 - CE Standard Tenoning machine for wooden frames, doors - CE Standard Technical data: Circular saw unit: Blade diameter mm 400 F30 - Motor Hp 4 - Cutting height mm 125 - Horizontal shifting mm 150 Cutterhead unit: Cutterheads lenght mm 150 - Max opening between cutterheads mm 185 - Cutterheads diameter mm 160 - Motor Hp 3 - Horizontal cutterheads adjustment shaft tenoning unit: Shaft diameter mm 35 - Useful working length mm 160 - Motor Hp 5,5 - Vertical and horizontal adjustment - Max tool diameter mm 320 Manual tilting tenoning carriage mm 600 x 600 Pneumatic workpiece holders Inclinable graduated fence +/- 45° Sliding safety guards N° 3 suction ports diameter mm 140 N° 1 suction port diameter mm 80 Compressed air 6 atm Overall dimensions mm 3550 x 1400 x 1600 h

Bore diameter: variabel mmNumber of heads horizontal: 1 St.Number of heads vertical: 0 St.1 Götzinger dowel gluing and insertion machine BLEWith the BLE, the workpieces are glued and dowelled on the front. Optionalthe BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stopwill. A 10 touch panel allows easy operation for manualor online operation.Base frame: in a compact design, covered with sheet metalTable support approx. 800 x 200 mmposition 1----------------------1 glue stationfull jet valveGlue quantity precisely adjustableGlue gun for counter hole gluingposition 2----------------------1 stainless steel glue pump, high-pressure pump and glue hoseitem 3----------------------1 press-in station with dowel separation and press-in cylinderitem 4----------------------1 oscillating conveyor for dowels d 8 x 50 mm with feed hoseinto the injection unititem 5----- ...

SPECIFICATIONS: Machining length: max. 3000 mm - min. 250 mm Processing thickness: min. 30 - max. 155 mm Processing width: max. 200 mm Tenon cutting area 01 Tenon cutting unit - max. Ø 400 mm - 3 kW 01 Spigot cutter - length 600 mm - 7.5 kW - shank Ø 50 mm - 3100 rpm 01 Electronic guidance Roll forming area: I Roll forming unit - length 600 - 7.5 kW - shank Ø 50 mm - 6000 rpm II Roll forming unit - length 600 mm - 7.5 kW - shank Ø 50 mm - 6000 rpm 01 Glazing bead unit - Ø 200 mm - 2.2 kW 01 Rubber roller drive unit

Cross-cut saw diam. 300 mm Milling spindle diam. 40 mm Sliding table with Festo length stop Suction nozzle saw 120 mm dto. Milling machine 140 mm Cable + plug 16 Amp, without bed. tools Workshop overhauled

Cross-cut saw motor 1.8 kW Milling motor above 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix hand clamp Saw blade 2 slotted discs

Manual hand unit: Ja J/NAutomatic for single pieces: J/NAutomatic for frames: Ja J/NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): 2000,3000,4000 mmWeight: 100 kgtiltable yes/no: nein neinAssembly glazing and sealing stand with lifting device RU -S1Stop - and assembly table standing, length 2000 mm, width 700 mmPlant height 1600 mm, lifting device with pneumatic 300-1000 mm,Space than roller conveyor , roll length 200 mm, roller pitch 200mm.Roller conveyor height adjustable 280-350 mm. Contact surface withFelt strips and a height-adjustable rubber roller bar at the bottom toTop . Conditioning grille to protect the edges , left and right respectively oneRole as edge protection for elements up to 2500 mm height.Aufstellrollenbahn with steel rollers , roll length 200 mm, roller spacing 200 mm,2 shelf boards, load capacity 300 kg.alternatively :-------------RU -S2Stop and assembly table standing . Same as RU -S1However, length 3000 mmalternatively :------------RU- S3Stop and assembly table standing des ...

: - Working width: - mm: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - In addition to standing a PDF document, see the description of positions -Prices on request!RUCHSER standard offer with layout fora wooden window production with being milledGlass bar and screwed corner joints.Daily capacity approximately 15 WindowManufacturing consisting of:Item 1.0 - Item 107 850 000RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mmfor horizontal position round and transport ofProfile sections.12 support arms each column welded tothe column, 2 adjustable center column,clear spacing of the support arms 130 mm,Depth of the support arms on each side 400 mm,Support arms covered with felt, with 4 plasticswivel castors, diameter 150 mm, of which2 with stop means.Item 2.0 - Item 0150001RU-M rotation - tilting tablemanually tiltable bearing surface 1300 x 1400 mm,with 4 plug extension 1 ...

Manual hand unit: J/NAutomatic for single pieces: Ja J/NAutomatic for frames: Ja J/NThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - Weight: - tiltable yes/no: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic rebating machine / automatic cross-cutting machine 2 spindles

0: ja Working width: 3000 (3500) mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 3 St.Number of tools: 2/3 St.Spindle diameter: 40/50 mm1 OKOMA folding machine model UF 2 EG-------------------------------------1. Energy data:- Operating voltage: 3 phases, 380 V, 50 Hz.- Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 66112. Profile spindle 1:- Spindle arrangement: right- Power 11 kW- Speed 7000 rpm- Direction of rotation: synchronous and counter rotation- Spindle diameter 40 mm- Usable length 252 mm- Tool diameter max. 230 mm- U-movement of the profile spindle- Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch- Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch- Automatic immersion: immersion speed can be regulated for tear-free Fold over- ...

Dimensions (L,W): , mmWeight: ca. 90 kgadjustable height (yes/no): ja stroke: 300 - 800 mmsurface of working table: 1.700 x 1.500 mmtable width: max. 3.800 mm0: ca. 130 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Cross-cut saws - saw blade diameter: mm 250 Milling unit - shank diameter: mm 35 Height of trunnion cutting shaft: mm 150 Manual guide carriage with 2 tilting guide rails

SPECIFICATIONS: Compilation: Tenon cutting area 2 vertical tenon cutting units - h 620 mm electronically controlled vertical / horizontal. 1 sawing unit 1 pantograph unit with tool changer magazine 1 workpiece return automated Profiling area 1 Vertical roll forming unit - H 620 mm electronically controlled vertical / horizontal. 1 vertical roll forming unit - h 620 mm electronically controlled vertical / horizontal. 1 vertical roll forming unit - h 620 mm electronically controlled vertical / horizontal. 1 aggregate for fittings 1 glazing bead cutting saw 1 roll forming unit - h 620 mm left Complete with workpiece selection table Workpiece removal and return Tools Documentation

SPECIFICATIONS: 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 320 mm fixed

SPECIFICATIONS: Workbench for reading and cutting glazing beads Workbench dimensions: 3000 x 1250 mm Tilt of saw blades: 45° Pneumatic/electric operation

SPECIFICATIONS: Workpiece length mm: 200 - 3000 Width of the workpiece mm: 20 - 200 Workpiece thickness mm: 30 - 120 Fence length right mm: 1500 HORIZONTAL DRILLING: Drill bit diameter mm: 8 Drilling depth mm: 60 Dowel size mm: 8 x 80 with glue addition Installed power kW: 6 Uses HN - HSS Drill Bits

max. tool diameter: , mm0: , mmoperating pressure: , barfilling amount: 52 lQuicksonic QS 520------------------Ultrasonic cleaning device with lid and work basketUsable dimensions: L 500 x W 400 x H 260Usable basket dimensions: L 444 x W 364 x H 224Content: approx. 52 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 4000 mmWorking height: 2600 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 5300 x 1250 x 3330 mmS&S frame press type RP 2000,-----------------------------C E - versionStable frame welded construction made of thick-walled special hollow profiles,Sliding carriage and pressure bar with 50 mm hole pattern.Continuous abutment on the left for width compression, lower abutmentin two levels.Vertical press cylinder on special pressure bar with one-hand quick adjustmentwith weight compensation in the 50 mm hole pattern, height-adjustable, longSliding carriages ensure thepermanent absorption of high pressing forces.Fast, smooth width adjustment with ball-bearing carriageCentral locking, fixation in 50 mm hole pattern.Upper horizontal press cylinder infinitely adjustable in height and withEquipped with counterbalance.Lower horizontal press cylinder with center holes for the twoAbutme ...

Brand: Eder & Müller Type: KT tilting table Year of construction: Description: Pneumatic swivel from horizontal to vertical position. Support grid extendable from 1500 - 2300 width and 1000 - 1600 height. Grooved rubber pad (original underneath or foam pads) Dimensions: Table length: 1500 - 2300 Table level: 920 mm Table width: 1000 - 1600 Weight: 90 KG

Number of motors: 2 Stück0: 2380 mmControl: , 0RUCHSER RU-GL-45°-----------------------------------------------------Glazing bead saw at the sliding work tableDeveloped for cutting glazing beads in pairs on the sliding work tableThe RU-GL glazing bead saw is mounted on a sliding work table withScanning and clamping device fortwo glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw stuckright saw on carriagemounted to be moved manually. Pneumatic clamping device from above and fromthe side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V.Sliding work table with felt pad, length with side shelf 3300 mm,Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerableCounter bearing for positioning the wings.Pos. 1: RU-GL double glass bead saw 45° on the RU-SA-3000-----------------------------------------------------for glazing beads up to 30 x 70 mm (W x H) ! ...

Number of motors: 2 Stück0: 2650 mmControl: , 0Ruchser RU-GLS-ED 45° glass bead saw--------------------------------------Developed for cutting glazing beads in pairsThe RU-GLS-ED45° double glazing bead saw must be adjusted to size manually. theMachine was designed for cutting glazing beads in pairs with acutting angle of 45° and features a fixed and amovable saw unit. The manual length adjustment is equipped withan electrical digital display. It can cut lengths from 240mm - 2650mmbe sawn. During the cutting process, the glazing beads with apneumatic clamping device clamped from above and from the front to prevent tiltingto prevent the glazing beads. Operation is via a safetytwo-hand operationItem 1: RU-GLS-ED45° double glazing bead saw-----------------------------------------------------with manual measurement, for the pairwiseCutting glazing beads, cutting angle 45°.Manual length  ...