window production machines used for sale (159)

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (L/W/H): 6100x1500x2300 mmWeight: 950 kg1 NEW drilling and milling center Götzinger Power Drill 300With the Götzinger PowerDrill you can, depending on the type and design:- Drill on the front and on the long side- Dowels of front doors, pegs, fighters- The drilling patterns are freely programmable- You can drill: handle slides and corner bearings, with quick-change multiple spindle- You can: Milling lock case, pusher and PZ as well as 3D belts and drill- The machine has a horizontal and a vertical milling unit- A simple control lets you create drilling and milling programs, save and call againBase frame in sturdy design, covered with sheet metalTable top 1800 x 200 mmProcessing unit:X-axis - 500 mm working travelY-axis - 0-120 mmZ-axis - 0-105 mm (above table)Horizontal aggregates:1  ...

0: 2750 mmWorking height: 2500 mm0: 300-1000 mmRUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022-----------------------------------------------------Vertical work table with lifting device and turning device. EspeciallySuitable for glazing and sealing wooden windows on both sides.Furnishing:System part covered with feltInfinitely variable pneumatic lifting device,Stroke of 300 mm - 1000 mm, based on roller conveyor heightTurning device for sealing on both sides, with roller conveyor 150 mmroll length2 pneumatic tensioners for clamping the window to the turning deviceVersion with special turning device for pushing through the on theRoller conveyor set up window with applied (closed)turning deviceEquipment demonstration machine, alternative/optional equipment on request!Pos. 1.0: Item no.: 1000000RU-SW3-90° vertical work table forWooden window with turning device forG ...

max. tool diameter: 400 mm: 180 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

max. tool diameter: 400 mm: 310 mmoperating pressure: 2 barROTATHERM chamber washing systems are used in all areas of industry andCraftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used.The parts are cleaned like in a dishwasher. Inserted into oneWire mesh basket they are in the closed device with a hotLye shower washed from all sides. The machine will be selected after theTemperature and washing time set in operation. A centrifugal pump promotes theWashing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive)After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting thethe pump is automatically put out of operation.ROTATHERM chamber washing systems are available in various size ...

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

0: 3.700mm, 5.100mm, 6.100mm mmWorking height: 160 mm0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !

I sell the Fensterbau Profil Umfälzautomat Zentrum Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 4 pcs. available. Condition very good !

SPECIFICATIONS: - Automatic workpiece blocking pneumatically controlled - Machine for the execution of slots of different lengths and depths for window parts, folding shutters and doors

SPECIFICATIONS: 45° glass strip saw Machining area mm: 2,700 x 1,000

SPECIFICATIONS: Machining center for final processing and assembly of fittings on windows and doors Dimensions workbench mm: 2,800 x 1,250 Three-spindle drilling unit for grip holes Pneumatic system for reading and cutting window handles "Cremonese" Tilting workbench Complete with pneumatic screwdriver

Length: 5000 mmWidth: 750 mmHeight: 3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung------------------------------------------------------ ----------komplett wie folgt :- Fahrbare Ausführung- Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert.- 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung- Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet- pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen fürnur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm.Dübellänge : min. 25 mm. – max. 60 mm.Tiefeinsetzen = 30 mm.Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung fürelektronische Dosierung in Verbindung ist, gespritzt .- Flexibler Arm mit Gegengewicht zu ...

: 3000 Working height: 2500 mm: 300-800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3400,4550 mmWorking height: 2500 mm: 300 - 800 mmGlazing and control pressRU-VGP3Glazing and sealing press, clamping width max. 3150 mm,Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm,Pressing beam height 2400 mm, plant part covered with felt, installation surfaceas roller conveyor, lifting device from 300 - 800 mm. Left and right eacha role as edge protection for elements up to 2500 mm height.(When ordering specify whether RIGHT or LINKER Pressbar mobile!)alternatively:-------------RU-VGP4Glazing and control press, version like RU-VGP3however span max. 4000 mm, length 4550 mm(When ordering specify whether RIGHT or LINKER Pressbar mobile!(technical data according to manufacturer - without guarantee!)Price on request !The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 2700 mmWidth: 770 mmHeight: 1250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: - mmprofile spindle: - Stückmain drive: - kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 5200 mmWidth: 1200 mmHeight: 900 - 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L,W): - mmWeight: - kgadjustable height (yes/no): ja 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of machnines: - Loading meters, approx.: - Total weight, approx.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 4500,6000 mmprofile spindle: 3 Stückmain drive: 24 kWControl: Siemens 840d Working Process Logos Life Evo XS 2345-------------------------------Vollautomatisches CNC-Fensterfertigungsanlage mit automatischerBe- und Entladung.2 Portale mit 3 Frässpindeln mit 4- und 5-AchstechnologieCNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität undProduktivität128 WerkzeugplätzeNEU:Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie fürkleinere Betriebe!Nebenstehend finde Sie aktuelle Videos dieser Baureihe.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Götzinger Power Drill in special version with dübelleim and press-in stationWith the Götzinger PowerDrill, you can choose:- Drill the front and long sides- Doweling of doors, seatings, fighters- The drilling patterns are freely programmable- You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads- You can: lock casings, pusher and PZ as well as 3D tapes and drill- The machine has a horizontal and a vertical milling unit- A simple control lets you create drilling and milling programs, Save and recallPOWER DRILL - drilling and milling machineUniversal drilling machine for drilling olives, corner bearings, dowel workOn the front and the front, milling, lock boxes, tapes, etc.Base in stable design, covered with sheet metalTable top 1800 x 200 mmProcessing u ...

Table dimensions: 1000,400 mmpneumatic clamping: 2 St.moveable: Option For quick pressing of Minizinken- or Soflineverbindungen- Independent of the angle- Particularly suitable for arched manufacturing in window- Table size 1000 x 400 mm- Pneumatic connector 10 bar- Air consumption: 0.5 cdm / stroke- Two clamping cylinders for workpiece clamping- Right half of the table stored on hardened shafts via linear ball bearings- 1 pressure cylinders for linear displacement table- CE - execution(technical data according to manufacturer - without guarantee.!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 3200,5100 mmprofile spindle: 1 Stückmain drive: 12 kWControl: Beckhoff CNCNumber of axles: 5 St.Masterwood Project 385 CNC-Bearbeitungszentrum---------------------------------------------5- Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, TreppenKurze Zusammenfassung:---------------------------------------------Arbeitsbe reich:X = 3200 mm (Optional 5100 mm) , Y = 1500 mm, Z = 200 mm1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme1 Stk. fest installierter Bohrkopf mit 19 Spindelnmit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtungmit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtungmit 2 doppelten Horizontalbohrspindeln X-Richtungund 1 doppelte Horizontalbohrspindel in Y-RichtungSägeaggregat in Bohrkopf integriert27 Werkzeugwechselplätze:Karussellwerkzeugwechsler mit 22 P ...

max. workpiece length: 3200/5100 mmprofile spindle: 1 Stückmain drive: 12 kWControl: Beckhoff CNCNumber of axles: 5 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.