8 ENGEL rubber injection presses used machines

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power:  ...

clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 430 x 660 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 800 kN - Mould mounting area: 430 x 660 mm - Clamping/opening stroke: 450 mm - Maximum mould installation height without heating plates: 300 mm - Maximum plate spacing without heating plates: 750 mm - Clamping direction: from below - Ejector stroke: 130 mm - Ejector force: 40 kN Injection unit: - Increased injection pressure: 2,180 bar - Maximum injection volume: 154 cm³ - Screw diameter: 35 mm - Screw length: 20D - Maximum screw speed: 20–400 rpm - Metering stroke: 160 mm - Injection: from above - Nozzle stroke: 250 mm - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power:  ...

clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power:  ...

Complete control CC 90 for ENGEL injection moulding machines

machine in stock!

Engel injection moulding machine old

Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robots / robotic interface

Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 1100 kN Holmabstand/Dist.Betw.Tiebars: Disk size/platen size: 730 mm x 600 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 50 mm Stroke volume/shot volume: 251 cc spec. Spritzdr / injection pressure: 1300/2050 bar General / General Engine power: 18.5 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 4.8 m x 1.4 m x 2 m Weight/weight: 6000 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 2 Robots / robotic interface

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Key data: 4200 kN

Machine in production !1

Key data: 700 kN, 35 mm

used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English  ...

Key data: 750 kN, 40 mm

Engel - Injection Molding Machine e - Max - 310/75 ( No.:1 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 40 – diameter - Actual shot value: 40,069,660 pcs. - Operating hours: 105,347 h – In automatic: 63,211 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:2 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 34,527,644 pcs. - Operating hours: 98,349 h – In automatic: 54612 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:3 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 41,658,321 pcs. - Operating hours: 103,302 h – In automatic: 65,611 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany