9 ERBEND folding machines used machines

sheet width: 1050 mm plate thickness: 1.50 mm daylight opening: 100 mm bending angle max.: 135 ° height: OW 100 mm total power requirement: manuell weight of the machine ca.: 330 kg. dimensions of the machine ca.: 1600 x 900 x 1450 mm Equipment: - robust, manual swivel bending machine - divided upper tool - lower and rear tool * Height of upper tool = 100 mm * Division 100/100/100/100/100/100/100/70/60/50/40/30/100 * left + right with horn tool - upper tool with quick-change system - quick foot clamp - angle stop - lockable - manual rear stop 500 mm - machine can be moved (rollers) - accessories box - rear * Pictures show identical machine (UFA 1212) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 71500 € : 1351.35 € : 4200 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 5450 mm : 2200 mm : 1900 mm : 5350 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 39000 € : 744.9 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 155 ° : 110 mm : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the b ...

: neu : 2026 : 080200 : prompt, Zwischenverkauf v : Türkei : 6550 € : 126.42 € : 1 : 1250 mm : 1.25 mm : 0.8 mm : 2 mm : 150 ° : 500 mm : 200 mm : 1500 mm : 750 mm : 1715 mm : 315 kg : geteilt, 45° : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63600 € : 1202.04 € : 3200 mm : 2 mm : 1.2 mm : 3 mm : Motorisch : 4450 mm : 2200 mm : 1900 mm : 4500 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59900 € : 1132.11 € : 2050 mm : 3 mm : 2 mm : 4 mm : Motorisch : 3350 mm : 2200 mm : 1900 mm : 3800 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in t ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 41000 € : 783.1 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : Motorisch : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bot ...

: neu : 2025 : 080093 : prompt, Zwischenverkauf v : Türkei : 6130 € : 118.31 € : 1 : 1050 mm : 1.5 mm : 1 mm : 2.2 mm : 150 ° : 500 mm : 200 mm : 1300 mm : 750 mm : 1515 mm : 280 kg : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 61800 € : 1168.02 € : 2550 mm : 2.5 mm : 1.5 mm : 3.5 mm : Motorisch : 3830 mm : 2200 mm : 1900 mm : 4050 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball roller ...

sheet width: 2100 mm plate thickness: 3,0 mm distance between columns: 2450 mm daylight opening: 160 mm : max. 150 ° back stop - adjustable: 6,0 - 1000 mm Control: CNC total power requirement: 5,37 kW dimensions: 3250 x 2450 x 2100 mm weight of the machine ca.: 3850 kg ORIGINAL PRICE: ~ 60,000 EURO Features: - ERBEND 15.6 CNC control panel operating unit - Electric backgauge from 6.0 to 1,000 mm * Material support table with ball rollers * Drive with servo motors - LED machine lighting - 1x 30° upper tool - radius 1.0 mm - 1x bending rail 15 mm / 1x bending rail 25 mm - Electric safety device at the front (light barriers) - Freely movable foot control - Operating instructions - CE declaration ** Special accessories included: - Split gooseneck upper tool, height = 90 mm - CNC electric motorized lower beam adjustment - Manual crowning of the bending beam The data for this ad was create ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29200 € : 557.72 € : 3200 mm : 2 mm : 1.2 mm : 3650 mm : 1700 mm : 1300 mm : 3100 kg NC-controlled backgauge 750 mm ELGO P40T touchscreen Rear light barrier protection Front finger guard cover Extendable front support bracket Cutting line illumination Equipment compliant with CE directives Operating instructions in German or English OPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

properties: Used roller conveyor folding element Condition: fully functional with traces of usage Expertly dismantled and packaged Price per pc. Technical data: Dimensions of the flap Total length: 1.180mm Total width incl. feet approx.: 670mm Conveyor width: 460mm Min. height top edge roll: 570mm Axle spacing: 75mm Roll diameter: 50mm In stock: 3 pieces Price per piece Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for compani ...

Pneumatic folding bending machine FASTI Type 606 - 11 - 1.0Folding machine for sheet metal folding pre-bendingFor making a fold bendFolding bending machine for thin sheet metal instead of press brakeFabr. No. 9166002 year of construction 1991Working length: 1100 mmMaterial thickness at 45 kg/mm² 1 mmCompressed air requirement 6 bar- pneum. Foot switch roller infeed via threaded toggle screwsSpace requirement L x W x H 1600 x 300 x 1050 mmWeight approx. 250 kggood conditionThe fold is the doubling of the sheet metal in the edge area, i.e. 1x folded around the

Gr. Working width: 1020 mm, for sheets up to: 1 mm back stop: 200 mm weight: 250 kg space requirement: 1420 x 650 x 1160 mm

Gr. Working width: 1530 mm for sheet metal up to: 2.5 mm opening width upper beam: 290 mm adjustable beam: 90 mm upper cheek drive: 1,1 kW under cheek drive: 3 kW Backgauge: Yes Weight: 2200 kg space requirement: 800 x 3000 x 1380 mm

Working length: 1020 mm Maximum sheet thickness: 2.5 mm Maximum opening width: 48 mm Bending angle: 0-135 ° Width: 1350 mm Overall width: 820 mm Height: 1140 mm Approximate weight: 285 kg FEATURES -Universal bending machine for sheet metal working and repairers -Sturdy construction in modern design -Easy adjustment of the upper beam by means of foot pedal, hands are free for the workpiece - manual bending machine for standard bending tasks -Segmented clamping beam for a large number of bending possibilities -Optimum price-performance ratio -Faster and easier bending operation via handle -Non-slip rubber coating on the foot pedal for safe working -Easy adjustment of the lower beam on the corresponding thickness -High upper beam for the manufacture of highly bent profiles Action price, including free home delivery to 1 address Germany (Mainland)

Built in 1991 Size max 700 x 1,000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m / min Suction equipment continuous stream feeder counter IZVA 341 1st folding unit: 4 buckle plates rear-mounted slitter shaft 2. rear-mounted slitter shaft noise prevention 2nd folding unit: 4 buckle plates rear-mounted slitter shaft noise prevention folding 3rd unit: 2 buckle plates rear-mounted slitter shaft delivery: belt delivery

HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR

Manufacturer: Heinrich KöllschenMaschinefabrik Rheydt Model: on the 2000 x 20 machine no.: 761907 Year of construction: 1976 weight: 24500KG General information / technical data: heavy mechanical bending machines from sturdy welding construction in very good condition Working width: 2000 mm Steel ST 50 maximum material thickness: 20 mm Opening the top clamping (clamping cheek): 475 mm Adjustment of the beam: 200 mm motorized height adjustment Bending angle: 130° via electrical rotation angle input can be set Upper cheek speed: 6 mm / sec Bending beam speed: 1.25 RPM (approx. 90 sec for 90 ° bend) Backgauge: from 50 to 999 mm electrically adjustable, with digital display of length dimensions machine: (h x w x d) 3600 x 4350 x 4400 mm (without pit / with bending beam landing) Dimensions cabinet:(h x b x t) 1800 x 1200 x 400 mm Bending actu ...

Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm

* Steel window folding bag for TH 78 Built: 2007

infeed station, pressing station, jogging station, banding station for up to 2 up production, transport to paternoster delivery table format sizes 1 up production 720 x 235 mm, 2up production 335 x 235 mm Bundle Delivery with Pressing Station

M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.

Used riser A+F AUTOMATION - Trays with round inlet - with NORDSON glue device Sightseeing and test run are possible by arrangement.

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 1.5 mm, upper cheek angle 160° - upper cheek stroke range up to 160 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 3 kW, dimensions approx. 4.3 x 1.8 m x 1.65 m, weight 2,700 kg